| Literature DB >> 19857961 |
M E Eugenio1, S M Santos, J M Carbajo, J A Martín, R Martín-Sampedro, A E González, J C Villar.
Abstract
The aim of this work was to obtain a LMS pre-treatment applicable to industrial TCF bleaching. Kraft pulp from Eucalyptus globulus was treated at 40 degrees C/pH 3 and 60 degrees C/pH 5 for 1h using an extracellular fluid enriched in laccase produced by Pycnoporus sanguineus and acetosyringone as mediator (HBT was used as a control mediator) (L). Alkaline extraction (E) and hydrogen peroxide (P) stages were then assayed. The LEP alternative was an efficient sequence to bleach kraft pulp since the enzymatic pre-treatment boosted the subsequent chemical bleaching. The best L pre-treatment was obtained with laccase-acetosyringone at 40 degrees C/pH 3. It reduces kappa number and hexenuronic acids, increases pulp viscosity, lowers hydrogen peroxide consumption down to an 87.4% (94.0% without L) and enhances brightness up to a 59% ISO (51% ISO without L). Copyright (c) 2009 Elsevier Ltd. All rights reserved.Entities:
Mesh:
Substances:
Year: 2009 PMID: 19857961 DOI: 10.1016/j.biortech.2009.09.084
Source DB: PubMed Journal: Bioresour Technol ISSN: 0960-8524 Impact factor: 9.642