The synthesis, material characterization, and in vitro biocompatibility of S-nitrosothiol (RSNO)-modified xerogels are described. Thiol-functionalized xerogel films were formed by hydrolysis and co-condensation of 3-mercaptopropyltrimethoxysilane (MPTMS) and methyltrimethoxysilane (MTMOS) sol-gel precursors at varying concentrations. Subsequent thiol nitrosation via acidified nitrite produced RSNO-modified xerogels capable of generating nitric oxide (NO) for up to 2 weeks under physiological conditions. Xerogels also exhibited NO generation upon irradiation with broad-spectrum light or exposure to copper, with NO fluxes proportional to wattage and concentration, respectively. Xerogels were capable of storing up to approximately 1.31 micromol NO mg(-1), and displayed negligible fragmentation over a 2-week period. Platelet and bacterial adhesion to nitrosated films was reduced compared to non-nitrosated controls, confirming the antithrombotic and antibacterial properties of the NO-releasing materials. Fibroblast cell viability was maintained on the xerogel surfaces illustrating the promise of RSNO-modified xerogels as biomedical device coatings.
The synthepan class="Chemical">sis, material characterization, and in vitro biocompn>atibility of n>an class="Chemical">S-nitrosothiol (RSNO)-modified xerogels are described. Thiol-functionalized xerogel films were formed by hydrolysis and co-condensation of 3-mercaptopropyltrimethoxysilane (MPTMS) and methyltrimethoxysilane (MTMOS) sol-gel precursors at varying concentrations. Subsequent thiol nitrosation via acidified nitrite produced RSNO-modified xerogels capable of generating nitric oxide (NO) for up to 2 weeks under physiological conditions. Xerogels also exhibited NO generation upon irradiation with broad-spectrum light or exposure to copper, with NO fluxes proportional to wattage and concentration, respectively. Xerogels were capable of storing up to approximately 1.31 micromol NO mg(-1), and displayed negligible fragmentation over a 2-week period. Platelet and bacterial adhesion to nitrosated films was reduced compared to non-nitrosated controls, confirming the antithrombotic and antibacterial properties of the NO-releasing materials. Fibroblast cell viability was maintained on the xerogel surfaces illustrating the promise of RSNO-modified xerogels as biomedical device coatings.
Authors: A B Seabra; E Pankotai; M Fehér; A Somlai; L Kiss; L Bíró; C Szabó; M Kollai; M G de Oliveira; Z Lacza Journal: Br J Dermatol Date: 2007-01-30 Impact factor: 9.302
Authors: Elizabeth J Brisbois; Maria Kim; Xuewei Wang; Azmath Mohammed; Terry C Major; Jianfeng Wu; Jessica Brownstein; Chuanwu Xi; Hitesh Handa; Robert H Bartlett; Mark E Meyerhoff Journal: ACS Appl Mater Interfaces Date: 2016-10-21 Impact factor: 9.229