STUDY DESIGN: Biomechanical and histologic analysis. OBJECTIVE: To compare the strength of the bone-screw interface of standard uncoated pedicle screws with screws treated with hydroxyapatite (HA), titanium plasma spray (TPS), and a composite HA-TPS coating. SUMMARY OF BACKGROUND DATA: Transpedicular screw fixation has become the gold standard in the treatment of various thoracolumbar spinal conditions. Pedicle screw loosening, however, has been reported, especially in mechanically demanding constructs or in vertebrae with low bone mineral density. METHODS: Six mature porcine were instrumented with 4 types of titanium monoaxial pedicle screws (uncoated, HA-only coated, TPS-only coated, and HA-TPS composite coated) in a systematically varied, single-blinded fashion. After a 3-month survival period, the spines were harvested en-bloc and "time zero" control screws were instrumented in adjacent vertebrae. Screw placement and bone mineral density were evaluated with a postharvest computed tomography, and the strength of the tissue-implant interface was evaluated with a torsional screw extraction analysis (60 screws) and a nondecalcified histologic analysis (16 screws). RESULTS: At 3 months postoperative, peak torque increased for all 3 types of coated screws (increased fixation) and decreased significantly for the uncoated screws (P < 0.001). Although 3-month peak torque was not statistically different between the 3 screw coatings, 4 of 10 TPS-only coated screws had a peak torque that was nearly 0 (<0.1 N m) versus only 1 of 10 HA-only screws and 0 of 10 HA-TPS composite screws. Histologic analysis confirmed the biomechanical findings with improved osseointegration in the HA-only and HA-TPS composite screws. CONCLUSION: Pedicle screw coatings that promote mechanical interlocking, TPS, or direct osteoblast bonding(HA) increased screw fixation in this nonfusion model. More non-HA coated screws, however, were thought to be "loose" with a nearly zero peak extraction torque and fibrous encapsulation. Increased osseointegration with HA may result in a decreased incidence of screw loosening and improved outcomes of transpedicular spinal instrumentation in nonfusion procedures.
STUDY DESIGN: Biomechanical and histologic analysis. OBJECTIVE: To compare the strength of the bone-screw interface of standard uncoated pedicle screws with screws treated with hydroxyapatite (HA), titanium plasma spray (TPS), and a composite HA-TPS coating. SUMMARY OF BACKGROUND DATA: Transpedicular screw fixation has become the gold standard in the treatment of various thoracolumbar spinal conditions. Pedicle screw loosening, however, has been reported, especially in mechanically demanding constructs or in vertebrae with low bone mineral density. METHODS: Six mature porcine were instrumented with 4 types of titanium monoaxial pedicle screws (uncoated, HA-only coated, TPS-only coated, and HA-TPS composite coated) in a systematically varied, single-blinded fashion. After a 3-month survival period, the spines were harvested en-bloc and "time zero" control screws were instrumented in adjacent vertebrae. Screw placement and bone mineral density were evaluated with a postharvest computed tomography, and the strength of the tissue-implant interface was evaluated with a torsional screw extraction analysis (60 screws) and a nondecalcified histologic analysis (16 screws). RESULTS: At 3 months postoperative, peak torque increased for all 3 types of coated screws (increased fixation) and decreased significantly for the uncoated screws (P < 0.001). Although 3-month peak torque was not statistically different between the 3 screw coatings, 4 of 10 TPS-only coated screws had a peak torque that was nearly 0 (<0.1 N m) versus only 1 of 10 HA-only screws and 0 of 10 HA-TPS composite screws. Histologic analysis confirmed the biomechanical findings with improved osseointegration in the HA-only and HA-TPS composite screws. CONCLUSION: Pedicle screw coatings that promote mechanical interlocking, TPS, or direct osteoblast bonding(HA) increased screw fixation in this nonfusion model. More non-HA coated screws, however, were thought to be "loose" with a nearly zero peak extraction torque and fibrous encapsulation. Increased osseointegration with HA may result in a decreased incidence of screw loosening and improved outcomes of transpedicular spinal instrumentation in nonfusion procedures.
Authors: Sven Hoppe; Christoph E Albers; Tarek Elfiky; Moritz C Deml; Helena Milavec; Sebastian F Bigdon; Lorin M Benneker Journal: J Funct Biomater Date: 2018-03-14