Literature DB >> 19101716

Nanoleakage, ultramorphological characteristics, and microtensile bond strengths of a new low-shrinkage composite to dentin after artificial aging.

Sillas Duarte1, Jin-Ho Phark, Fabiana Mansur Varjão, Avishai Sadan.   

Abstract

OBJECTIVES: To study the microtensile bond strengths and nanoleakage of low-shrinkage composite to dentin. The null hypotheses tested were (1) aging does not affect the bonding of low-shrinkage composite; (2) there is no difference in microtensile bond strengths and nanoleakage using different bonding strategies.
METHODS: 32 extracted molars were assigned to one of four groups: LS System Adhesive (LS, 3M ESPE); dentin etched for 15s with phosphoric acid+LS System Adhesive (LSpa); Adper Single Bond Plus (SB, 3M ESPE); SB+LS Bond (SBLS). Occlusal dentin was exposed and restored with Filtek LS (3M ESPE). The samples were tested after 24h or after 20,000 thermocycles and 6 months of aging. Teeth were sectioned with a cross-section of 0.8+/-0.2mm(2) and fractured at a crosshead speed of 1mm/min. The data were submitted to ANOVA/Duncan's post hoc test, at p<0.05. Five slabs from each group were selected and immersed in 50wt% ammoniacal silver nitrate. Then, specimens were processed for SEM, the silver penetration was measured and data analyzed with Kruskal-Wallis at p<0.05.
RESULTS: No statistically significant difference was found among the experimental groups for the factor dentin treatment (p=0.165) and aging (p=0.091). All experimental groups exhibit some degree of nanoleakage. There was no adhesion of Filtek LS applied directly over dentin surfaces treated with SB. SIGNIFICANCE: The new low-shrinkage resin composite showed compatibility only with its dedicated adhesive. Pre-etching did not improve the bond strengths to low-shrinkage resin composite. Some degree of nanoleakage was evident in all groups.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 19101716     DOI: 10.1016/j.dental.2008.10.012

Source DB:  PubMed          Journal:  Dent Mater        ISSN: 0109-5641            Impact factor:   5.304


  18 in total

1.  Effect of thermal aging on the tensile bond strength at reduced areas of seven current adhesives.

Authors:  Bruno Baracco; M Victoria Fuentes; Miguel A Garrido; Santiago González-López; Laura Ceballos
Journal:  Odontology       Date:  2012-07-13       Impact factor: 2.634

2.  Nanoleakage Evaluation of Posterior Teeth Restored with Low Shrinkable Resin Composite- An invitro Study.

Authors:  Labib Mohamed Labib; Sameh Mahmoud Nabih; Kusai Baroudi
Journal:  J Clin Diagn Res       Date:  2016-07-01

3.  Incorporation of bactericidal poly-acrylic acid modified copper iodide particles into adhesive resins.

Authors:  Camila Sabatini; Anthony S Mennito; Bethany J Wolf; David H Pashley; Walter G Renné
Journal:  J Dent       Date:  2015-02-27       Impact factor: 4.379

4.  Marginal integrity of low-shrinking versus methacrylate-based composite: effect of different one-step self-etch adhesives.

Authors:  Ladislav Gregor; Lefever Dorien; Tissiana Bortolotto; Albert J Feilzer; Ivo Krejci
Journal:  Odontology       Date:  2016-11-01       Impact factor: 2.634

5.  Water distribution in dentin matrices: bound vs. unbound water.

Authors:  Kelli A Agee; Anuradha Prakki; Tariq Abu-Haimed; Ghada H Naguib; Manar Abu Nawareg; Arzu Tezvergil-Mutluay; Debora L S Scheffel; Chen Chen; Seung Soon Jang; Hyea Hwang; Martha Brackett; Geneviéve Grégoire; Franklin R Tay; Lorenzo Breschi; David H Pashley
Journal:  Dent Mater       Date:  2015-01-19       Impact factor: 5.304

Review 6.  Low-Shrinkage Resin Matrices in Restorative Dentistry-Narrative Review.

Authors:  Ebtehal G Albeshir; Rashed Alsahafi; Reem Albluwi; Abdulrahman A Balhaddad; Heba Mitwalli; Thomas W Oates; Gary D Hack; Jirun Sun; Michael D Weir; Hockin H K Xu
Journal:  Materials (Basel)       Date:  2022-04-18       Impact factor: 3.748

7.  Six-month evaluation of a resin/dentin interface created by methacrylate and silorane-based materials.

Authors:  Renata Kirita Doi Sampaio; Linda Wang; Rodrigo Varella de Carvalho; Eugenio José Garcia; Andréa Mello de Andrade; Celso Afonso Klein-Júnior; Rosa Helena Miranda Grande; Sandra Kiss Moura
Journal:  J Appl Oral Sci       Date:  2013 Jan-Feb       Impact factor: 2.698

8.  Evaluation of bond strength of silorane and methacrylate based restorative systems to dentin using different cavity models.

Authors:  Stephano Zerlottini Isaac; Ana Claudia Pietrobom Bergamin; Cecília Pedroso Turssi; Flávia Lucisano Botelho do Amaral; Roberta Tarkany Basting; Fabiana Mantovani Gomes França
Journal:  J Appl Oral Sci       Date:  2013 Sep-Oct       Impact factor: 2.698

9.  Microtensile bond strength of silorane-based composite specific adhesive system using different bonding strategies.

Authors:  Laura Alves Bastos; Ana Beatriz Silva Sousa; Brahim Drubi-Filho; Fernanda de Carvalho Panzeri Pires-de-Souza; Lucas da Fonseca Roberti Garcia
Journal:  Restor Dent Endod       Date:  2014-08-25

10.  Bond strengths of silorane- and methacrylate-based composites to various underlying materials.

Authors:  Sezin Ozer; Emine Sen Tunc; Nihan Gonulol
Journal:  Biomed Res Int       Date:  2014-05-07       Impact factor: 3.411

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.