Literature DB >> 18437534

Osteoblast proliferation and maturation on bioactive fiber-reinforced composite surface.

Ahmed Mansour Ballo1, Anne K Kokkari, Ville V Meretoja, Lippo L Lassila, Pekka K Vallittu, Timo O Narhi.   

Abstract

The objective of this study was to evaluate the proliferation and osteogenic potential of bone-marrow derived osteoblast-like cells on fiber-reinforced composite (FRC) substrates with and without bioactive glass surface modification. Three FRC materials were fabricated for the study: (a) grit-blasted FRC, (b) grit-blasted FRC with bidirectional net reinforcement and (c) FRC with bioactive glass (BAG) coating. Rat bone-marrow derived osteoblast-like cells were harvested and cultured on experimental material plates and on cp. titanium plates (control) for 21 days. The materials' surfaces were characterized by roughness testing and scanning electron microscopy. Cell growth and differentiation kinetics were subsequently investigated by evaluating proliferation, alkaline phosphatase (ALP) activity, osteocalcin (OC) and bone sialoprotein (BSP) production. On day 14, the cell proliferation was significantly lower (P<0.05) on FRC-BAG than on titanium and FRC. The proliferation on the other three materials was equal throughout the experiment. The maximal ALP activities on FRC, FRC-Net, and titanium were observed on day 21, whereas FRC-BAG had already reached the maximal level on day 14. Expression of osteoblastic markers (OC, BSP) indicates that the fastest osteogenic differentiation takes place on FRC after 7 days. In contrast, a slower differentiation process was observed on titanium than on any other tested material (P<0.015) at 21 days, as was confirmed by increased mRNA expression of OC and BSP. It can be concluded that the proliferation and maturation of osteoblast-like cells on FRC appears to be comparable to titanium. Presence of BAG enhances cell maturation.

Entities:  

Mesh:

Substances:

Year:  2008        PMID: 18437534     DOI: 10.1007/s10856-008-3453-y

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  43 in total

1.  Nantotechniques and approaches in biotechnology.

Authors:  A Curtis; C Wilkinson
Journal:  Trends Biotechnol       Date:  2001-03       Impact factor: 19.536

Review 2.  Relationship of cell growth to the regulation of tissue-specific gene expression during osteoblast differentiation.

Authors:  G S Stein; J B Lian; T A Owen
Journal:  FASEB J       Date:  1990-10       Impact factor: 5.191

Review 3.  Success or failure of dental implants? A literature review with treatment considerations.

Authors:  Judith A Porter; J Anthony von Fraunhofer
Journal:  Gen Dent       Date:  2005 Nov-Dec

4.  The implantation of natural tooth form bioglasses in baboons. A preliminary report.

Authors:  H R Stanley; L Hench; R Going; C Bennett; S J Chellemi; C King; N Ingersoll; E Ethridge; K Kreutziger
Journal:  Oral Surg Oral Med Oral Pathol       Date:  1976-09

5.  A new fluorometric assay for determination of osteoblastic proliferation: effects of glucocorticoids and insulin-like growth factor-I.

Authors:  K B Jonsson; A Frost; R Larsson; S Ljunghall; O Ljunggren
Journal:  Calcif Tissue Int       Date:  1997-01       Impact factor: 4.333

6.  Bone formation in vitro by stromal cells obtained from bone marrow of young adult rats.

Authors:  C Maniatopoulos; J Sodek; A H Melcher
Journal:  Cell Tissue Res       Date:  1988-11       Impact factor: 5.249

7.  Effect of Ca/P coating resorption and surgical fit on the bone/implant interface.

Authors:  S H Maxian; J P Zawadsky; M G Dunn
Journal:  J Biomed Mater Res       Date:  1994-11

8.  Improved determination of serum calcium with 2-cresolphthalein complexone.

Authors:  K Lorentz
Journal:  Clin Chim Acta       Date:  1982-12-23       Impact factor: 3.786

Review 9.  A systematic review of the influence of different titanium surfaces on proliferation, differentiation and protein synthesis of osteoblast-like MG63 cells.

Authors:  Maria Bächle; Ralf J Kohal
Journal:  Clin Oral Implants Res       Date:  2004-12       Impact factor: 5.977

10.  A comparative clinical study of three different endosseous implants in edentulous mandibles.

Authors:  A K Røynesdal; E Ambjørnsen; S Støvne; H R Haanaes
Journal:  Int J Oral Maxillofac Implants       Date:  1998 Jul-Aug       Impact factor: 2.804

View more
  6 in total

1.  Effects of heat treatment of wood on hydroxylapatite type mineral precipitation and biomechanical properties in vitro.

Authors:  J Rekola; L V J Lassila; J Hirvonen; M Lahdenperä; R Grenman; A J Aho; P K Vallittu
Journal:  J Mater Sci Mater Med       Date:  2010-05-13       Impact factor: 3.896

2.  Evaluation of intensity of artefacts in CBCT by radio-opacity of composite simulation models of implants in vitro.

Authors:  N Kuusisto; P K Vallittu; L V J Lassila; S Huumonen
Journal:  Dentomaxillofac Radiol       Date:  2014-10-06       Impact factor: 2.419

3.  Biocompatibility of fiber-reinforced composite (FRC) and woven-coated FRC: an in vivo study.

Authors:  Ahmet Mert Nalbantoğlu; Kaya Eren; Deniz Yanik; Hülya Toker; Ersin Tuncer
Journal:  Clin Oral Investig       Date:  2022-08-08       Impact factor: 3.606

4.  The effect of exposed glass fibers and particles of bioactive glass on the surface wettability of composite implants.

Authors:  Aous A Abdulmajeed; Lippo V Lassila; Pekka K Vallittu; Timo O Närhi
Journal:  Int J Biomater       Date:  2011-12-27

Review 5.  An overview of development and status of fiber-reinforced composites as dental and medical biomaterials.

Authors:  Pekka K Vallittu
Journal:  Acta Biomater Odontol Scand       Date:  2018-04-12

6.  Biological responses of human gingival fibroblasts (HGFs) in an innovative co-culture model with Streptococcus mitis to thermosets coated with a silver polysaccharide antimicrobial system.

Authors:  Silvia Sancilio; Viviana di Giacomo; Mara Di Giulio; Marialucia Gallorini; Eleonora Marsich; Andrea Travan; Lorena Tarusha; Luigina Cellini; Amelia Cataldi
Journal:  PLoS One       Date:  2014-05-07       Impact factor: 3.240

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.