Micropermeability of current self-etching and etch-and-rinse adhesives bonded to deep dentine: a comparison study using a double-staining/confocal microscopy technique.

Water sorption decreases the mechanical properties and the bond strengths of resin-bonded dentine. The aim of this study was to evaluate the micropermeability of several self-etching and etch-and-rinse adhesives. Optibond FL, Silorane, Scotchbond 1XT, G-Bond, and DC-Bond were bonded under simulated pulpal pressure. A 10 wt% solution of ammoniacal silver nitrate and a 1 wt% solution of rhodamine B were injected into the pulp chamber at 20 cm of water pressure. The dentine-adhesive interfaces were examined using a confocal scanning microscope. Micropermeability was detected in all the adhesives. DC-Bond, G-Bond, and Scotchbond 1XT showed voids along the resin-bonded interface. Silorane and Optibond FL showed an adhesive layer that was free from water trees and micropermeability. The double staining technique is a method that gives accurate results in the study of the resin-dentine micropermeability. Each class of adhesive has a different distribution of micropermeability. The higher the micropermeability, the higher the risk of defects at the resin-dentine interface, which may represent the pathway for hydrolytic and enzymatic degradation of resin-dentine bonds over time.