An investigation of secondary ion yield enhancement using Bin2+ (n=1,3,5) primary ions.

We have investigated secondary ion yield enhancement using Bin2+ (n=1, 3, 5) primary ions impacting phenylalanine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), cholesterol, Irganox 1010, and polymer films adsorbed on silicon and aluminum. Secondary ion yields are increased using Bi2+and Bi3(2+) primary ions for the molecular layers and polymers that can undergo allyl cation rearrangements. For Irganox 1010, the deprotonated molecular ion yields (m/z 1175; [M-H]-) are one to two times larger for Bi2+ and Bi(3)2+ primary ions than for Bi+ and Bi3+ at the same primary ion velocities. In the positive ion mode, the largest fragment ion yield (m/z 899) is 1.5 times larger for Bi2+ ions than for Bi+. For Bi3(2+) the largest fragment ion yield is only 70% of the ion yield using Bi3+, but the secondary ion yields of the fragment ions at m/z 57 and 219 are enhanced. For polymers that can undergo allyl cation rearrangement reactions the secondary ion yield enhancements of the monomer ions range from 1.3 to 4.3. For Bi(5)2+ primary ions, secondary ion yields were the same or slightly larger than for Bi5+ in the negative ion mass spectra for Irganox 1010, but lower in the positive ion mode. No secondary ion yield enhancements were measured on polymer samples for Bi5(2+). For all polymer films studied, secondary ion intensities from the oligomer regions are substantially decreased using Bin2+ (n=1, 3, 5). We discuss differences in the ionization mechanisms for doubly and singly-charged Bi primary ion bombardment.