Literature DB >> 1777659

CAD/CAM imaging in dentistry.

F Duret1, J D Preston.   

Abstract

CAD/CAM (computer-assisted design/computer assisted manufacturing), although devised 20 years ago, has only been available for routine dental practice for 2 years. As a supplement to the conventional methods for making dental prostheses, CAD/CAM will have profound effects on the dental profession. CAD/CAM will improve versatility, accuracy, and cost effectiveness and will be a part of routine dental practice by the beginning of the 21st century.

Entities:  

Mesh：

Year:  1991        PMID： 1777659

Source DB:  PubMed          Journal:  Curr Opin Dent        ISSN： 1046-0764


  11 in total

1.  An open CAM system for dentistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and industrial CAM software.

Authors:  Li Lu; Shusheng Liu; Shenggen Shi; Jianzhong Yang
Journal:  J Huazhong Univ Sci Technolog Med Sci       Date:  2011-10-25

2.  The introduction of digital dental technology into BDS curricula.

Authors:  C Chatham; M H Spencer; D J Wood; A Johnson
Journal:  Br Dent J       Date:  2014-12-05       Impact factor: 1.626

3.  Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study.

Authors:  Marcel Reymus; Rosalie Fabritius; Andreas Keßler; Reinhard Hickel; Daniel Edelhoff; Bogna Stawarczyk
Journal:  Clin Oral Investig       Date:  2019-05-24       Impact factor: 3.573

4.  The effect of glazing and aging on the surface properties of CAD/CAM resin blocks.

Authors:  Neslihan Tekçe; Sinan Fidan; Safa Tuncer; Dilan Kara; Mustafa Demirci
Journal:  J Adv Prosthodont       Date:  2018-02-12       Impact factor: 1.904

5.  3D Printed Temporary Veneer Restoring Autotransplanted Teeth in Children: Design and Concept Validation Ex Vivo.

Authors:  Ali Al-Rimawi; Mostafa EzEldeen; Danilo Schneider; Constantinus Politis; Reinhilde Jacobs
Journal:  Int J Environ Res Public Health       Date:  2019-02-11       Impact factor: 3.390

Review 6.  The direct digital workflow in fixed implant prosthodontics: a narrative review.

Authors:  George Michelinakis; Dimitrios Apostolakis; Phophi Kamposiora; George Papavasiliou; Mutlu Özcan
Journal:  BMC Oral Health       Date:  2021-01-21       Impact factor: 2.757

7.  Ceramic and Composite Polishing Systems for Milled Lithium Disilicate Restorative Materials: A 2D and 3D Comparative In Vitro Study.

Authors:  Carlos A Jurado; Clarisa Amarillas-Gastelum; Kelvin I Afrashtehfar; Liliana Argueta-Figueroa; Nicholas G Fischer; Abdulrahman Alshabib
Journal:  Materials (Basel)       Date:  2022-08-05       Impact factor: 3.748

8.  Comparison of marginal and internal fit of three-unit implant-supported fixed prosthetic substructures fabricated using CAD/CAM systems.

Authors:  Ozlem Kayikci; Sabit Melih Ates
Journal:  Clin Oral Investig       Date:  2021-07-31       Impact factor: 3.573

Review 9.  Trends in computer-aided manufacturing in prosthodontics: a review of the available streams.

Authors:  Jaafar Abduo; Karl Lyons; Mohammed Bennamoun
Journal:  Int J Dent       Date:  2014-04-08

Review 10.  Ceramic Materials and Technologies Applied to Digital Works in Implant-Supported Restorative Dentistry.

Authors:  Se-Wook Pyo; Dae-Joon Kim; Jung-Suk Han; In-Sung Luke Yeo
Journal:  Materials (Basel)       Date:  2020-04-22       Impact factor: 3.623
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.