OBJECTIVE: Most of current dental adhesive systems show favorable immediate results in terms of retention and sealing of bonded interface, thereby counteracting polymerization shrinkage that affects resin-based restorative materials. Despite immediate efficacy, there are major concerns when dentin bonded interfaces are tested after aging even for short time period, i.e. 6 months. METHODS: This study critically discusses the latest peer-reviewed reports related to formation, aging and stability of resin bonding, focusing on the micro and nano-phenomena related to adhesive interface degradation. RESULTS: Most simplified one-step adhesives were shown to be the least durable, while three-step etch-and-rinse and two-step self-etch adhesives continue to show the highest performances, as reported in the overwhelming majority of studies. In other words, a simplification of clinical application procedures is done to the detriment of bonding efficacy. Among the different aging phenomena occurring at the dentin bonded interfaces, some are considered pivotal in degrading the hybrid layer, particularly if simplified adhesives are used. Insufficient resin impregnation of dentin, high permeability of the bonded interface, sub-optimal polymerization, phase separation and activation of endogenous collagenolytic enzymes are some of the recently reported factors that reduce the longevity of the bonded interface. SIGNIFICANCE: In order to overcome these problems, recent studies indicated that (1) resin impregnation techniques should be improved, particularly for two-step etch-and-rinse adhesives; (2) the use of conventional multi-step adhesives is recommended, since they involve the use of a hydrophobic coating of nonsolvated resin; (3) extended curing time should be considered to reduce permeability and allow a better polymerization of the adhesive film; (4) proteases inhibitors as additional primer should be used to increase the stability of the collagens fibrils within the hybrid layer inhibiting the intrinsic collagenolytic activity of human dentin.
OBJECTIVE: Most of current dental adhesive systems show favorable immediate results in terms of retention and sealing of bonded interface, thereby counteracting polymerization shrinkage that affects resin-based restorative materials. Despite immediate efficacy, there are major concerns when dentin bonded interfaces are tested after aging even for short time period, i.e. 6 months. METHODS: This study critically discusses the latest peer-reviewed reports related to formation, aging and stability of resin bonding, focusing on the micro and nano-phenomena related to adhesive interface degradation. RESULTS: Most simplified one-step adhesives were shown to be the least durable, while three-step etch-and-rinse and two-step self-etch adhesives continue to show the highest performances, as reported in the overwhelming majority of studies. In other words, a simplification of clinical application procedures is done to the detriment of bonding efficacy. Among the different aging phenomena occurring at the dentin bonded interfaces, some are considered pivotal in degrading the hybrid layer, particularly if simplified adhesives are used. Insufficient resin impregnation of dentin, high permeability of the bonded interface, sub-optimal polymerization, phase separation and activation of endogenous collagenolytic enzymes are some of the recently reported factors that reduce the longevity of the bonded interface. SIGNIFICANCE: In order to overcome these problems, recent studies indicated that (1) resin impregnation techniques should be improved, particularly for two-step etch-and-rinse adhesives; (2) the use of conventional multi-step adhesives is recommended, since they involve the use of a hydrophobic coating of nonsolvated resin; (3) extended curing time should be considered to reduce permeability and allow a better polymerization of the adhesive film; (4) proteases inhibitors as additional primer should be used to increase the stability of the collagens fibrils within the hybrid layer inhibiting the intrinsic collagenolytic activity of human dentin.
Authors: A Mazzoni; F D Nascimento; M Carrilho; I Tersariol; V Papa; L Tjäderhane; R Di Lenarda; F R Tay; D H Pashley; L Breschi Journal: J Dent Res Date: 2012-02-21 Impact factor: 6.116
Authors: Marco Breschi; Davide Fabiani; Leonardo Sandrolini; Martino Colonna; Laura Sisti; Micaela Vannini; Annalisa Mazzoni; Alessandra Ruggeri; David H Pashley; Lorenzo Breschi Journal: Dent Mater Date: 2012-07-07 Impact factor: 5.304
Authors: Valeria B Gotti; Américo B Correr; Steven H Lewis; Victor P Feitosa; Lourenço Correr-Sobrinho; Jeffrey W Stansbury Journal: Dent Mater Date: 2016-09-21 Impact factor: 5.304
Authors: Adriana Pigozzo Manso; Rosa Helena Miranda Grande; Ana Karina Bedran-Russo; Alessandra Reis; Alessandro D Loguercio; David Henry Pashley; Ricardo Marins Carvalho Journal: Dent Mater Date: 2014-05-09 Impact factor: 5.304
Authors: Sara Kalagi; Sabrina A Feitosa; Eliseu A Münchow; Victor M Martins; Ashley E Karczewski; N Blaine Cook; Kim Diefenderfer; George J Eckert; Saulo Geraldeli; Marco C Bottino Journal: Dent Mater Date: 2020-03-30 Impact factor: 5.304