Behavioral reference frames for planning human reaching movements.

At some stage in the process of a sensorimotor transformation for a reaching movement, information about the current position of the hand and information about the location of the target must be encoded in the same frame of reference to compute the hand-to-target difference vector. Two main hypotheses have been proposed regarding this reference frame: an eye-centered and a body-centered frame. Here we evaluated these hypotheses using the pointing errors that subjects made when planning and executing arm movements to memorized targets starting from various initial hand positions while keeping gaze fixed in various directions. One group of subjects (n = 10) was tested without visual information about hand position during movement planning (unseen-hand condition); another group (n = 8) was tested with hand and target position simultaneously visible before movement onset (seen-hand condition). We found that both initial hand position and gaze fixation direction had a significant effect on the magnitude and direction of the pointing error. Errors were significantly smaller in the seen-hand condition. For both conditions, though, a reference frame analysis showed that the errors arose at an eye- or hand-centered stage or both, but not at a body-centered stage. As a common reference frame is required to specify a movement vector, these results suggest that an eye-centered mechanism is involved in integrating target and hand position in programming reaching movements. We discuss how simple gain elements modulating the eye-centered target and hand-position signals can account for these results.