Literature DB >> 15760084

Effects of water vapor absorption on the physical and chemical stability of amorphous sodium indomethacin.

Ping Tong1, George Zografi.   

Abstract

This study reports on the effects that water absorbed into amorphous sodium indomethacin (NaIMC) can have on simultaneous tendencies to crystallize to its trihydrate form and to undergo base-catalyzed hydrolysis because of the plasticizing effects of water on molecular mobility. Measurement of water vapor absorption at 30 degrees C and powder x-ray diffraction patterns as a function of relative humidity (RH) reveal that upon exposure to 21% RH, NaIMC does not crystallize over a 2-month period. Measurements of the glass transition temperature as a function of such exposure reveals a change in T(g) from 121 degrees C, dry, to 53 degrees C at 21% RH, such that T(g) at 21% RH is approximately 13 degrees C above the highest storage temperature of 40 degrees C used in the study. At 56% RH and higher, however, crystallization to the trihydrate occurs rapidly; although over the 2-month period, crystallization was never complete. Assessment of chemical degradation by high-performance liquid chromatography analysis revealed significant instability at 21% RH; whereas at higher RH, the extent of chemical degradation was reduced, reflecting the greater crystallization to the more chemically stable crystalline form. It is concluded that when amorphous forms of salts occur in solid dosage forms, the simultaneous effects of enhanced water vapor sorption on crystallization and chemical degradation must be considered, particularly when assessing solid-state chemical degradation at higher temperatures and RH (eg, 40 degrees C 75% RH).

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15760084      PMCID: PMC2750461          DOI: 10.1208/pt050226

Source DB:  PubMed          Journal:  AAPS PharmSciTech        ISSN: 1530-9932            Impact factor:   3.246


  8 in total

Review 1.  Characteristics and significance of the amorphous state in pharmaceutical systems.

Authors:  B C Hancock; G Zografi
Journal:  J Pharm Sci       Date:  1997-01       Impact factor: 3.534

2.  A study of amorphous molecular dispersions of indomethacin and its sodium salt.

Authors:  P Tong; G Zografi
Journal:  J Pharm Sci       Date:  2001-12       Impact factor: 3.534

3.  Chemical stability of indomethacin in the solid amorphous and molten states.

Authors:  J T Carstensen; T Morris
Journal:  J Pharm Sci       Date:  1993-06       Impact factor: 3.534

4.  Kinetics and mechanism of the basic hydrolysis of indomethacin and related compounds: a reevaluation.

Authors:  A Cipiciani; C Ebert; P Linda; F Rubessa; G Savelli
Journal:  J Pharm Sci       Date:  1983-09       Impact factor: 3.534

5.  Quantitative crystallinity determinations for beta-lactam antibiotics by solution calorimetry: correlations with stability.

Authors:  M J Pikal; A L Lukes; J E Lang; K Gaines
Journal:  J Pharm Sci       Date:  1978-06       Impact factor: 3.534

6.  Solid-state characteristics of amorphous sodium indomethacin relative to its free acid.

Authors:  P Tong; G Zografi
Journal:  Pharm Res       Date:  1999-08       Impact factor: 4.200

7.  Cefoxitin sodium: solution and solid-state chemical stability studies.

Authors:  E R Oberholtzer; G S Brenner
Journal:  J Pharm Sci       Date:  1979-07       Impact factor: 3.534

8.  The relationship between the glass transition temperature and the water content of amorphous pharmaceutical solids.

Authors:  B C Hancock; G Zografi
Journal:  Pharm Res       Date:  1994-04       Impact factor: 4.200

  8 in total
  8 in total

Review 1.  Impact of excipient interactions on solid dosage form stability.

Authors:  Ajit S Narang; Divyakant Desai; Sherif Badawy
Journal:  Pharm Res       Date:  2012-06-16       Impact factor: 4.200

2.  Hot Melt Extrusion: Development of an Amorphous Solid Dispersion for an Insoluble Drug from Mini-scale to Clinical Scale.

Authors:  Anjali M Agrawal; Mayur S Dudhedia; Ewa Zimny
Journal:  AAPS PharmSciTech       Date:  2015-10-20       Impact factor: 3.246

3.  A calorimetric method to estimate molecular mobility of amorphous solids at relatively low temperatures.

Authors:  Chen Mao; Sai Prasanth Chamarthy; Stephen R Byrn; Rodolfo Pinal
Journal:  Pharm Res       Date:  2006-08-24       Impact factor: 4.200

4.  Effect of Formulation and Process Parameters on the Disproportionation of Indomethacin Sodium in Buffered Lyophilized Formulations.

Authors:  Sampada Koranne; Seema Thakral; Raj Suryanarayanan
Journal:  Pharm Res       Date:  2018-01-05       Impact factor: 4.200

5.  Design, characterization, and aerosol dispersion performance modeling of advanced spray-dried microparticulate/nanoparticulate mannitol powders for targeted pulmonary delivery as dry powder inhalers.

Authors:  Xiaojian Li; Frederick G Vogt; Don Hayes; Heidi M Mansour
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2014-02-06       Impact factor: 2.849

6.  Structure determination and characterization of carbendazim hydrochloride dihydrate.

Authors:  Stephen G Machatha; Tapan Sanghvi; Samuel H Yalkowsky
Journal:  AAPS PharmSciTech       Date:  2005-09-20       Impact factor: 3.246

7.  The effect of water on the solid state characteristics of pharmaceutical excipients: Molecular mechanisms, measurement techniques, and quality aspects of final dosage form.

Authors:  Gergely Szakonyi; Romána Zelkó
Journal:  Int J Pharm Investig       Date:  2012-01

8.  Single particles as resonators for thermomechanical analysis.

Authors:  Peter Ouma Okeyo; Peter Emil Larsen; Eric Ofosu Kissi; Fatemeh Ajalloueian; Thomas Rades; Jukka Rantanen; Anja Boisen
Journal:  Nat Commun       Date:  2020-03-06       Impact factor: 14.919

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.