Literature DB >> 15684644

Dexamethasone-loaded poly(lactic-co-glycolic) acid microspheres/poly(vinyl alcohol) hydrogel composite coatings for inflammation control.

Siddhesh D Patil1, Fotios Papadimitrakopoulos, Diane J Burgess.   

Abstract

BACKGROUND: Successful performance of implantable glucose biosensors for metabolic monitoring is dependent on tissue compatibility. Negative immunostimulatory tissue reactions that occur due to implantation-induced tissue injury and the prolonged presence of such sensors can lead to a loss of functionality and device failure. The use of novel poly(lactic-co-glycolic) acid (PLGA) microsphere/poly(vinyl alcohol) (PVA) hydrogel composite coatings for implantable biosensors to control localized inflammation and fibrosis at the sensor/tissue interface is reported.
METHODS: Dexamethasone-loaded PLGA microspheres were prepared using a solvent evaporation technique. Composites were fabricated by dispersing microspheres in PVA solution and performing freeze-thaw cycling. Composites were implanted into subcutaneous tissue of rats. In vitro and in vivo drug release kinetics were studied. Immunostimulatory response was determined through histopathological evaluation of excised tissue.
RESULTS: PLGA microsphere/PVA hydrogel composites achieved localized dexamethasone delivery with approximate zero-order release kinetics. A linear level A in vitro-in vivo correlation was observed (R2 = 0.97). Dexamethasone released at a steady rate of 0.17 microg/day was sufficient to control acute and chronic inflammation as well as fibrosis. Implantation of composites containing no drug led to significant infiltration of inflammation-mediating cells at the implant site characteristic of acute inflammation followed by proliferation of a fibrotic band surrounding the implant by week 3.
CONCLUSIONS: PLGA microsphere/PVA hydrogel composites eluting dexamethasone were successful in controlling negative tissue reactions at the sensor-tissue interface by reducing the level of inflammation-mediation cells to those observed in normal tissue. These composites show promise as coatings for implantable biosensors to improve biocompatibility and prolong sensor lifetime.

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 15684644     DOI: 10.1089/dia.2004.6.887

Source DB:  PubMed          Journal:  Diabetes Technol Ther        ISSN: 1520-9156            Impact factor:   6.118


  40 in total

1.  Short-term and long-term effects of orthopedic biodegradable implants.

Authors:  Ami R Amini; James S Wallace; Syam P Nukavarapu
Journal:  J Long Term Eff Med Implants       Date:  2011

2.  Glucose sensor membranes for mitigating the foreign body response.

Authors:  Ahyeon Koh; Scott P Nichols; Mark H Schoenfisch
Journal:  J Diabetes Sci Technol       Date:  2011-09-01

3.  Species and density of implant surface chemistry affect the extent of foreign body reactions.

Authors:  Ashwin Nair; Ling Zou; Dhiman Bhattacharyya; Richard B Timmons; Liping Tang
Journal:  Langmuir       Date:  2008-01-12       Impact factor: 3.882

4.  Accelerated in vitro release testing of implantable PLGA microsphere/PVA hydrogel composite coatings.

Authors:  Jie Shen; Diane J Burgess
Journal:  Int J Pharm       Date:  2011-10-13       Impact factor: 5.875

5.  Recent advances in continuous glucose monitoring: biocompatibility of glucose sensors for implantation in subcutis.

Authors:  Peter H Kvist; Henrik E Jensen
Journal:  J Diabetes Sci Technol       Date:  2007-09

6.  FIP/AAPS joint workshop report: dissolution/in vitro release testing of novel/special dosage forms.

Authors:  Cynthia K Brown; Horst Dieter Friedel; Amy R Barker; Lucinda F Buhse; Susanne Keitel; Todd L Cecil; Johannes Kraemer; J Michael Morris; Christos Reppas; Mary P Stickelmeyer; Chikako Yomota; Vinod P Shah
Journal:  AAPS PharmSciTech       Date:  2011-06-18       Impact factor: 3.246

7.  Microsphere erosion in outer hydrogel membranes creating macroscopic porosity to counter biofouling-induced sensor degradation.

Authors:  S Vaddiraju; Y Wang; L Qiang; D J Burgess; F Papadimitrakopoulos
Journal:  Anal Chem       Date:  2012-10-05       Impact factor: 6.986

Review 8.  Biocompatible materials for continuous glucose monitoring devices.

Authors:  Scott P Nichols; Ahyeon Koh; Wesley L Storm; Jae Ho Shin; Mark H Schoenfisch
Journal:  Chem Rev       Date:  2013-02-07       Impact factor: 60.622

9.  Polyelectrolyte-coated alginate microspheres as drug delivery carriers for dexamethasone release.

Authors:  R D Jayant; M J McShane; R Srivastava
Journal:  Drug Deliv       Date:  2009-08       Impact factor: 6.419

Review 10.  Biomimetic strategies based on viruses and bacteria for the development of immune evasive biomaterials.

Authors:  Matthew T Novak; James D Bryers; William M Reichert
Journal:  Biomaterials       Date:  2009-01-29       Impact factor: 12.479

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.