1-3 piezoelectric composite transducers for swept-frequency calibration of hydrophones from 100 kHz to 2 MHz.

Rapid calibration of hydrophones used in biomedical ultrasound is possible with swept frequency techniques such as time delay spectrometry. However, calibrations below 2 MHz largely have been neglected because of insufficient transmitting transducer bandwidth, even though important medical applications operate in this range. To address this deficiency, several transmitting transducer designs were developed and tested, and two 1-3 piezoelectric composite designs were found to have the requisite bandwidth and uniformity of response. In one the element has a plane front face and spherically concave back face (plano-concave), and in the second both faces are concave, but with different radii of curvature (biconcave). The nonuniform thickness disperses the thickness resonance, and the composite structure suppresses radial-mode resonances. Also, the composite's lower acoustic impedance provides a more efficient match to water. The piezoelectric composite transducers were found to have transmitting pressure sensitivities superior to ceramic single-element and segmented designs having similar dimensions, and their responses were significantly more uniform (< 25 dB variation from 0.1-2 MHz, with < 1 dB fine structure variation), likely due to decreased contributions from radial modes.