Literature DB >> 14714842

Evaluation of custom-made procera ceramic abutments for single-implant tooth replacement: a prospective 1-year follow-up study.

Kristina Henriksson1, Torsten Jemt.   

Abstract

PURPOSE: The aim of this study was to evaluate the clinical performance of customized ceramic single-implant abutments in combination with two different techniques for fabricating crowns.
MATERIALS AND METHODS: Twenty consecutive patients were provided with 24 single-implant restorations with customized ceramic abutments. The restorations were either cemented to the abutment (n = 13) or fabricated with the veneering material fused directly onto the ceramic abutment (n = 11). The patients were evaluated at 6 and 12 months with radiographs and clinical parameters for complications and soft tissue response.
RESULTS: All implants and restorations were still in function after 1 year. Few clinical problems were reported during the follow-up period. The interproximal soft tissue recovered to near normal size. The mean marginal bone loss was similar for both groups, reaching an average of 0.3 mm (SD 0.71) after 1 year in function.
CONCLUSION: The short-term results indicate that customized ceramic abutments are successful and have comparable function, regardless of fabrication method.

Entities:  

Mesh:

Substances:

Year:  2003        PMID: 14714842

Source DB:  PubMed          Journal:  Int J Prosthodont        ISSN: 0893-2174            Impact factor:   1.681


  7 in total

1.  Fracture behavior of straight or angulated zirconia implant abutments supporting anterior single crowns.

Authors:  Frank P Nothdurft; Klaus E Doppler; Kurt J Erdelt; Andreas W Knauber; Peter R Pospiech
Journal:  Clin Oral Investig       Date:  2010-01-19       Impact factor: 3.573

2.  Reliability and fatigue failure modes of implant-supported aluminum-oxide fixed dental prostheses.

Authors:  Christian F J Stappert; Marta Baldassarri; Yu Zhang; Felix Hänssler; Elizabeth D Rekow
Journal:  Clin Oral Implants Res       Date:  2011-09-05       Impact factor: 5.977

Review 3.  Titanium in dentistry: historical development, state of the art and future perspectives.

Authors:  Juliana Ribeiro Pala Jorge; Valentim Adelino Barão; Juliana Aparecida Delben; Leonardo Perez Faverani; Thallita Pereira Queiroz; Wirley Gonçalves Assunção
Journal:  J Indian Prosthodont Soc       Date:  2012-10-20

Review 4.  A systematic review and meta-analysis evaluating the survival, the failure, and the complication rates of veneered and monolithic all-ceramic implant-supported single crowns.

Authors:  Bjarni Elvar Pjetursson; Irena Sailer; Andrey Latyshev; Kerstin Rabel; Ralf-Joachim Kohal; Duygu Karasan
Journal:  Clin Oral Implants Res       Date:  2021-10       Impact factor: 5.021

5.  Comparisons of maximum deformation and failure forces at the implant-abutment interface of titanium implants between titanium-alloy and zirconia abutments with two levels of marginal bone loss.

Authors:  Chiung-Fang Wang; Heng-Li Huang; Dan-Jae Lin; Yen-Wen Shen; Lih-Jyh Fuh; Jui-Ting Hsu
Journal:  Biomed Eng Online       Date:  2013-05-20       Impact factor: 2.819

6.  Implant Rehabilitation in Advanced Generalized Aggressive Periodontitis: A Case Report and Literature Review.

Authors:  Sasan Rasaeipour; Hakimeh Siadat; Amiralireza Rasouli; Neda Sajedinejadd; Safoura Ghodsi
Journal:  J Dent (Tehran)       Date:  2015-08

7.  Retrospective Clinical Study of a Freely Removable Implant-Supported Fixed Dental Prosthesis by a Microlocking System.

Authors:  Eun-Bin Bae; Won-Tak Cho; Hyun-Young Bae; So-Hyoun Lee; Tae-Hyung Kim; Jung-Bo Huh
Journal:  Biomed Res Int       Date:  2020-11-03       Impact factor: 3.411

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.