Literature DB >> 14704981

Surface analyses of micro-arc oxidized and hydrothermally treated titanium and effect on osteoblast behavior.

Y M Zhang1, P Bataillon-Linez, P Huang, Y M Zhao, Y Han, M Traisnel, K W Xu, H F Hildebrand.   

Abstract

Osteoblast adhesion on the implant material surface is essential for the success of any implant in which osteointegration is required. Surface properties of implant material have a critical role in the cell adhesion progress. Titanium and its alloys are widespread and increasingly used as implant material in dentistry and orthopedics because of their excellent biocompatibility, which is attributed to a passive layer of TiO2 on the surface. In this study, the micro-arc oxidizing (MAO) and hydrothermally synthesizing (HS) methods were used to modify the TiO2 layer on the titanium surface. The surface microstructure was observed by scanning electron microscopy. The surface energy was assessed. The mouse osteoblastic cell line (MC3T3-E1) was seeded on the treated surfaces to evaluate their effect on cell behavior. This included cell adhesion kinetics, cell proliferation, cell morphology, and cytoskeletal organization. The surface structure of MAO samples exhibited micropores with a diameter of 1-3 microm, whereas the MAO-HS-treated samples showed additional multiple crystalline microparticles on the microporous surface. The surface energy of MAO and MAO-HS was higher than that of titanium. The cell adhesion rate was higher on the MAO-HS surface than on the MAO and titanium surface, but without any significant difference between them. After 3 days of culture, cells proliferated significantly more on the MAO and titanium surface than on the MAO-HS surface. The cytoskeletal organization was analyzed by actin and vinculin staining on all the samples. We conclude that the MAO and MAO-HS methods change the surface energy of TiO2 layer on the titanium surface. This may have an influence on the initial cell attachment. Other surface characteristics may be involved in the cell proliferation, which is different from cell attachment on the sample surface. A longer-duration cell experiment should be conducted to see the effect on cell differentiation. Future in vivo evaluation may give further evidence to optimize the surface character of this kind of implant material. Copyright 2003 Wiley Periodicals, Inc. J Biomed Mater Res 68A: 383-391, 2004

Entities:  

Mesh:

Substances:

Year:  2004        PMID: 14704981     DOI: 10.1002/jbm.a.20063

Source DB:  PubMed          Journal:  J Biomed Mater Res A        ISSN: 1549-3296            Impact factor:   4.396


  13 in total

1.  Bone cell-materials interactions and Ni ion release of anodized equiatomic NiTi alloy.

Authors:  Sheldon A Bernard; Vamsi Krishna Balla; Neal M Davies; Susmita Bose; Amit Bandyopadhyay
Journal:  Acta Biomater       Date:  2011-01-11       Impact factor: 8.947

2.  Influence of pentavalent dopant addition to polarization and bioactivity of hydroxyapatite.

Authors:  Jharana Dhal; Susmita Bose; Amit Bandyopadhyay
Journal:  Mater Sci Eng C Mater Biol Appl       Date:  2013-04-01       Impact factor: 7.328

3.  Effect of Biomaterial Electrical Charge on Bone Morphogenetic Protein-2-Induced In Vivo Bone Formation.

Authors:  Maurits G L Olthof; Diederik H R Kempen; Xifeng Liu; Mahrokh Dadsetan; Marianna A Tryfonidou; Michael J Yaszemski; Wouter J A Dhert; Lichun Lu
Journal:  Tissue Eng Part A       Date:  2019-06-14       Impact factor: 3.845

4.  Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties.

Authors:  Vamsi Krishna Balla; Subhadip Bodhak; Susmita Bose; Amit Bandyopadhyay
Journal:  Acta Biomater       Date:  2010-02-02       Impact factor: 8.947

5.  Effects of titanium surface anodization with CaP incorporation on human osteoblastic response.

Authors:  Natássia Cristina Martins Oliveira; Camilla Christian Gomes Moura; Darceny Zanetta-Barbosa; Daniela Baccelli Silveira Mendonça; Lyndon Cooper; Gustavo Mendonça; Paula Dechichi
Journal:  Mater Sci Eng C Mater Biol Appl       Date:  2013-01-11       Impact factor: 7.328

6.  Direct laser processing of a tantalum coating on titanium for bone replacement structures.

Authors:  Vamsi Krishna Balla; Shashwat Banerjee; Susmita Bose; Amit Bandyopadhyay
Journal:  Acta Biomater       Date:  2009-12-04       Impact factor: 8.947

7.  Fabrication of Hydroxyapatite/Tantalum Composites by Pressureless Sintering in Different Atmosphere.

Authors:  Cuiling Cai; Xinyu Wang; Binbin Li; Kuo Dong; Ying Shen; Zhi Li; Linyi Shen
Journal:  ACS Omega       Date:  2021-05-03

8.  Improving the osteogenesis of human bone marrow mesenchymal stem cell sheets by microRNA-21-loaded chitosan/hyaluronic acid nanoparticles via reverse transfection.

Authors:  Zhongshan Wang; Guangsheng Wu; Mengying Wei; Qian Liu; Jian Zhou; Tian Qin; Xiaoke Feng; Huan Liu; Zhihong Feng; Yimin Zhao
Journal:  Int J Nanomedicine       Date:  2016-05-17

9.  Combined Effect of a Microporous Layer and Type I Collagen Coating on a Biphasic Calcium Phosphate Scaffold for Bone Tissue Engineering.

Authors:  Mun-Hwan Lee; Changkook You; Kyo-Han Kim
Journal:  Materials (Basel)       Date:  2015-03-16       Impact factor: 3.623

10.  Novel Porous Phosphorus⁻Calcium⁻Magnesium Coatings on Titanium with Copper or Zinc Obtained by DC Plasma Electrolytic Oxidation: Fabrication and Characterization.

Authors:  Krzysztof Rokosz; Tadeusz Hryniewicz; Sofia Gaiaschi; Patrick Chapon; Steinar Raaen; Dalibor Matýsek; Łukasz Dudek; Kornel Pietrzak
Journal:  Materials (Basel)       Date:  2018-09-11       Impact factor: 3.623

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.