Comparison of dissolution profiles for albendazole tablets using USP apparatus 2 and 4.

The in vitro dissolution of albendazole from three different commercially available products (200 mg tablets) was studied using U.S. Pharmacopeia (USP) Apparatus 2 and USP Apparatus 4 in order to compare the release performance of the drug in two essentially different dissolution systems. For both cases, 0.1 N HCl was used as dissolution medium. Only the reference product and one of the generic products studied met the 80% USP 24 specification for albendazole dissolved at 30 min, using USP Apparatus 2. Although the reference product reached 80% of albendazole dissolved at 30 min when Apparatus 4 was used, the generic products' dissolution performance was markedly reduced in this system. Though dissolution rate was slower using Apparatus 4, the total quantity of albendazole dissolved from the reference product, represented by area under the dissolution profile, was practically the same regardless of the system used. Dissolution kinetics of albendazole was adequately described by Weibull's function for all the products. The dissolution time (t(d)) derived from data fitting to this function showed significant differences among the products studied. Data analysis based on analysis of variance (ANOVA) showed nonequivalence among the dissolution profiles of generic products compared with the reference product either with the dissolution vessel system or the flow-through cell, as well as nonequivalence among the dissolution profiles using both apparatuses with the same product. Though differences in the dissolution profiles for generic products against the reference product in both systems were found, USP Apparatus 4 showed higher discriminative capacity in differentiating the release characteristics of the products tested.