OBJECTIVES: To study work exposure and respiratory symptoms in New Zealand plywood mill workers. METHODS: Personal inhalable dust (n = 57), bacterial endotoxin (n = 20), abietic acid (n = 20), terpene (n = 20) and formaldehyde (n = 22) measurements were taken and a respiratory health questionnaire was administered to 112 plywood mill workers. RESULTS: Twenty-six percent of the dust exposures exceeded 1 mg/m(3), however, none of the samples exceeded the legal limit of 5 mg/m(3) [geometric mean (GM) = 0.7 mg/m(3), geometric standard deviation (GSD) = 1.9]. Workers in the composer area (where broken sheets are joined together) were significantly (P < 0.01) more highly exposed. Endotoxin levels were low to moderate (GM = 23.0 EU/m(3), GSD = 2.8). Abietic acid levels ranged from 0.3 to 2.4 micro g/m(3) (GM = 0.7 micro g/m(3), GSD = 1.8) and were significantly (P < 0.05) higher for workers in the composer area of the process. Geometric mean levels of alpha-pinene, beta-pinene and Delta(3)-carene were 1.0 (GSD = 2.7), 1.5 (GSD = 2.8) and 0.1 (GSD = 1.4), respectively, and alpha-pinene and beta-pinene levels were significantly (P < 0.001) higher for workers in the 'green end' of the process, up to and including the veneer dryers. Formaldehyde levels ranged from 0.01 to 0.74 mg/m(3) [GM = 0.08 mg/m(3) (= 0.06 p.p.m.), GSD = 3.0]. Asthma symptoms were more common in plywood mill workers (20.5%, n = 112) than in the general population [12.8%, n = 415, adjusted OR (95% CI) = 1.5 (0.9-2.8)]. Asthma symptoms were associated with duration of employment and were reported to lessen or disappear during holidays. No clear association with any of the measured exposures was found, with the exception of formaldehyde, where workers with high exposure reported more asthma symptoms (36.4%) than low exposed workers [7.9%, adjusted OR (95% CI) = 4.3 (0.7-27.7)]. CONCLUSIONS: Plywood mill workers are exposed to inhalable dust, bacterial endotoxin, abietic acid, terpenes and formaldehyde, and they appear to have an increased risk of developing work-related respiratory symptoms. These symptoms may be due to formaldehyde exposure, although a potential causal role for other exposures cannot be excluded.
OBJECTIVES: To study work exposure and respiratory symptoms in New Zealand plywood mill workers. METHODS: Personal inhalable dust (n = 57), bacterial endotoxin (n = 20), abietic acid (n = 20), terpene (n = 20) and formaldehyde (n = 22) measurements were taken and a respiratory health questionnaire was administered to 112 plywood mill workers. RESULTS: Twenty-six percent of the dust exposures exceeded 1 mg/m(3), however, none of the samples exceeded the legal limit of 5 mg/m(3) [geometric mean (GM) = 0.7 mg/m(3), geometric standard deviation (GSD) = 1.9]. Workers in the composer area (where broken sheets are joined together) were significantly (P < 0.01) more highly exposed. Endotoxin levels were low to moderate (GM = 23.0 EU/m(3), GSD = 2.8). Abietic acid levels ranged from 0.3 to 2.4 micro g/m(3) (GM = 0.7 micro g/m(3), GSD = 1.8) and were significantly (P < 0.05) higher for workers in the composer area of the process. Geometric mean levels of alpha-pinene, beta-pinene and Delta(3)-carene were 1.0 (GSD = 2.7), 1.5 (GSD = 2.8) and 0.1 (GSD = 1.4), respectively, and alpha-pinene and beta-pinene levels were significantly (P < 0.001) higher for workers in the 'green end' of the process, up to and including the veneer dryers. Formaldehyde levels ranged from 0.01 to 0.74 mg/m(3) [GM = 0.08 mg/m(3) (= 0.06 p.p.m.), GSD = 3.0]. Asthma symptoms were more common in plywood mill workers (20.5%, n = 112) than in the general population [12.8%, n = 415, adjusted OR (95% CI) = 1.5 (0.9-2.8)]. Asthma symptoms were associated with duration of employment and were reported to lessen or disappear during holidays. No clear association with any of the measured exposures was found, with the exception of formaldehyde, where workers with high exposure reported more asthma symptoms (36.4%) than low exposed workers [7.9%, adjusted OR (95% CI) = 4.3 (0.7-27.7)]. CONCLUSIONS: Plywood mill workers are exposed to inhalable dust, bacterial endotoxin, abietic acid, terpenes and formaldehyde, and they appear to have an increased risk of developing work-related respiratory symptoms. These symptoms may be due to formaldehyde exposure, although a potential causal role for other exposures cannot be excluded.
Authors: Cheol-Woong Kwon; Madalina M Chirila; Taekhee Lee; Martin Harper; Roy J Rando Journal: Int J Environ Anal Chem Date: 2013-01-10 Impact factor: 2.826
Authors: Suramya Waidyanatha; Michael Hackett; Sherry R Black; Mathew D Stout; Timothy R Fennell; Melanie R Silinski; Scott L Watson; Joseph Licause; Veronica G Robinson; Barney Sparrow; Reshan A Fernando; Stephen Cooper; Cynthia V Rider Journal: Toxicol Appl Pharmacol Date: 2021-03-18 Impact factor: 4.219
Authors: Angelina Wójcik-Fatla; Barbara Mackiewicz; Anna Sawczyn-Domańska; Jacek Sroka; Jan Siwiec; Mariola Paściak; Bogumiła Szponar; Krzysztof Pawlik; Jacek Dutkiewicz Journal: Int Arch Occup Environ Health Date: 2022-01-11 Impact factor: 2.851