Literature DB >> 26526539

Determination of airborne wood dust in Button samples by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS).

Cheol-Woong Kwon1, Madalina M Chirila2, Taekhee Lee2, Martin Harper2, Roy J Rando1.   

Abstract

Emerging concerns regarding the toxicity of inhaled wood dust support the need for techniques to quantitate wood content of mixed industrial dusts. The diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis technique was applied to the determination of wood content of 181 inhalable dust samples (geometric mean concentration: 0.895 mg/m(3); geometric standard deviation: 2.73) collected from six wood product industry factories using 25mm glass fibre filters with the Button aerosol sampler. Prior to direct DRIFTS analysis the filter samples were treated with ethyl acetate and re-deposited uniformly. Standards ranging from 125 μg to 4000 μg were prepared for red oak, southern yellow pine, and red cedar and used for quantitation of samples depending upon the wood materials present at a given factory. The oak standards spectra were quantitated by linear regression of response in Kubelka-Munk units at 1736 cm(-1), whereas the pine standards and the cedar standards spectra were quantitated by polynomial regression of response in log 1/R units at 1734 cm(-1), with the selected wavenumbers corresponding to stretching vibration of free C=O from cellulose and hemicelluloses. For one factory which used both soft- and hardwoods, a separate polynomial standard curve was created by proportionally combining the oak and pine standards polynomial regression equations based on response (log 1/R) at 1734 cm(-1). The analytical limits of detection were approximately 52 μg of oak, 20 μg of pine, 30 μg of cedar, and 16 μg of mixed oak and pine for the factory with mixed woods. Overall, the average of dry wood dust percentage of inhalable dust was approximately 56% and the average dry wood dust weight was 0.572mg for the Button samples. Across factories, there were statistically significant differences (p<0.001) for the percentage of dry wood dust in inhalable dust with factory averages ranging from 33.5 to 97.6%.

Entities:  

Keywords:  Button samples; DRIFTS; inhalable dust; wood

Year:  2013        PMID: 26526539      PMCID: PMC4626444          DOI: 10.1080/03067319.2012.755619

Source DB:  PubMed          Journal:  Int J Environ Anal Chem        ISSN: 0306-7319            Impact factor:   2.826


  14 in total

1.  On-filter determination of collected wood dust by diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS).

Authors:  Roy J Rando; Rachele A Gibson; Cheol-Woong Kwon; Halet G Poovey; Henry W Glindmeyer
Journal:  J Environ Monit       Date:  2005-05-23

2.  Respiratory symptoms and lung function among Danish woodworkers.

Authors:  Vivi Schlünssen; Inger Schaumburg; Ebbe Taudorf; Anders B Mikkelsen; Torben Sigsgaard
Journal:  J Occup Environ Med       Date:  2002-01       Impact factor: 2.162

3.  A meta-analysis on wood dust exposure and risk of asthma.

Authors:  M Pérez-Ríos; A Ruano-Ravina; M Etminan; B Takkouche
Journal:  Allergy       Date:  2009-10-01       Impact factor: 13.146

4.  Quantitative mid-infrared diffuse reflection of occupational wood dust exposures.

Authors:  Madalina M Chirila; Taekhee Lee; Michael M Flemmer; James E Slaven; Martin Harper
Journal:  Appl Spectrosc       Date:  2011-03       Impact factor: 2.388

5.  Nasal and sinonasal cancer. Connection with occupational exposures in Denmark, Finland and Sweden.

Authors:  S Hernberg; P Westerholm; K Schultz-Larsen; R Degerth; E Kuosma; A Englund; U Engzell; H S Hansen; P Mutanen
Journal:  Scand J Work Environ Health       Date:  1983-08       Impact factor: 5.024

6.  Field performance of the RespiCon for size-selective sampling of industrial wood processing dust.

Authors:  Roy Rando; Halet Poovey; Dinkar Mokadam; Joseph Brisolara; Henry Glindmeyer
Journal:  J Occup Environ Hyg       Date:  2005-04       Impact factor: 2.155

7.  Occupational risks for nasal cancer in Sweden.

Authors:  Marjolein Hemelt; Charlotta Granström; Kari Hemminki
Journal:  J Occup Environ Med       Date:  2004-10       Impact factor: 2.162

8.  Respiratory symptoms and occupational exposures in New Zealand plywood mill workers.

Authors:  Wouter Fransman; Dave McLean; Jeroen Douwes; Paula A Demers; Victor Leung; Neil Pearce
Journal:  Ann Occup Hyg       Date:  2003-06

9.  Longitudinal respiratory health study of the wood processing industry.

Authors:  Henry W Glindmeyer; Roy J Rando; John J Lefante; Laurie Freyder; Joseph A Brisolara; Robert N Jones
Journal:  Am J Ind Med       Date:  2008-08       Impact factor: 2.214

10.  Wood dust sampling: field evaluation of personal samplers when large particles are present.

Authors:  Taekhee Lee; Martin Harper; James E Slaven; Kiyoung Lee; Roy J Rando; Elizabeth H Maples
Journal:  Ann Occup Hyg       Date:  2010-10-29
View more
  1 in total

1.  A comparison of two laboratories for the measurement of wood dust using button sampler and diffuse reflection infrared Fourier-transform spectroscopy (DRIFTS).

Authors:  Madalina M Chirila; Khachatur Sarkisian; Michael E Andrew; Cheol-Woong Kwon; Roy J Rando; Martin Harper
Journal:  Ann Occup Hyg       Date:  2014-12-02
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.