Cüneyt Sar1, Onder Kilicoglu. 1. Department of Orthopaedics and Trauma, Ustanbul University, Instanbul Medical Faculty, Turkey. cunetsar@hotmail.com
Abstract
OBJECTIVE: A new technique for posterior sacroiliac fixation is described and compared with conventional techniques. PATIENTS/ MATERIAL AND METHODS: A patient with sacral alar fracture (zone 1) and another one with sacroiliac joint instability due to tuberculous infection underwent fixation using screws placed in the S1 pedicle and the iliac bone. Vertical stability of the new technique also was investigated using polyurethane pelvic bone analogs and compared with anterior double plating (group P) and iliosacral screw fixation (group ISS) techniques. RESULTS: Healing was obtained and reduction was maintained in both patients on the final follow-up examination at 2 years postoperatively. Vertical loading tests revealed that failure loads within the first 10 mm of displacement of the new pediculoiliac screw fixation technique (group PIS) was higher than plating (P = 0.03) and lower than ISS techniques (P = 0.002). Ultimate failure load of the PIS technique was slightly higher than plating (P = 0.277) and lower than ISS techniques (P = 0.003). With the addition of an iliosacral screw to the pediculoiliac screw construction (PIS+ISS), the PIS technique became more stable in early (P = 0.110) and ultimate failure loads (P = 0.003). CONCLUSIONS: Pediculoiliac screw fixation for sacroiliac joint disruptions and zone I sacrum fractures using iliac and S1 pedicle screws is a new and effective alternative for obtaining and maintaining anatomic reduction.
OBJECTIVE: A new technique for posterior sacroiliac fixation is described and compared with conventional techniques. PATIENTS/ MATERIAL AND METHODS: A patient with sacral alar fracture (zone 1) and another one with sacroiliac joint instability due to tuberculous infection underwent fixation using screws placed in the S1 pedicle and the iliac bone. Vertical stability of the new technique also was investigated using polyurethane pelvic bone analogs and compared with anterior double plating (group P) and iliosacral screw fixation (group ISS) techniques. RESULTS: Healing was obtained and reduction was maintained in both patients on the final follow-up examination at 2 years postoperatively. Vertical loading tests revealed that failure loads within the first 10 mm of displacement of the new pediculoiliac screw fixation technique (group PIS) was higher than plating (P = 0.03) and lower than ISS techniques (P = 0.002). Ultimate failure load of the PIS technique was slightly higher than plating (P = 0.277) and lower than ISS techniques (P = 0.003). With the addition of an iliosacral screw to the pediculoiliac screw construction (PIS+ISS), the PIS technique became more stable in early (P = 0.110) and ultimate failure loads (P = 0.003). CONCLUSIONS: Pediculoiliac screw fixation for sacroiliac joint disruptions and zone I sacrum fractures using iliac and S1 pedicle screws is a new and effective alternative for obtaining and maintaining anatomic reduction.
Authors: Brett D Crist; Ferris M Pfeiffer; Michael S Khazzam; Rebecca A Kueny; Gregory J Della Rocca; William L Carson Journal: J Orthop Translat Date: 2018-07-10 Impact factor: 5.191