PURPOSE: We modeled retropulsion during holmium:YAG lithotripsy on the conservation of momentum, whereby the force of ejected fragment debris off of the calculous surface should equal the force of retropulsion displacing the stone. We tested the hypothesis that retropulsion occurs as a result of ejected stone debris. MATERIALS AND METHODS: Uniform calculous phantoms were irradiated with holmium:YAG energy in air and in water. Optical fiber diameter and pulse energy were varied. Motion of the phantom was monitored with high speed video imaging. Laser induced crater volume and geometry were characterized by optical coherence tomography. To determine the direction of plume laser burn paper was irradiated at various incident angles. RESULTS: Retropulsion was greater for phantoms irradiated in air versus water. Retropulsion increased as fiber diameter increased and as pulse energy increased (p <0.001). Crater volumes increased as pulse energy increased (p <0.05) and generally increased as fiber diameter increased. Crater geometry was wide and shallow for larger fibers, and narrow and deeper for smaller fibers. The ejected plume propagated in the direction normal to the burn paper surface regardless of the laser incident angle. CONCLUSIONS: Retropulsion increases as pulse energy and optical fiber diameter increase. Vector analysis of the ejected plume and crater geometry explains increased retropulsion using larger optical fibers. Holmium:YAG lithotripsy should be performed with small optical fibers to limit retropulsion.
PURPOSE: We modeled retropulsion during holmium:YAG lithotripsy on the conservation of momentum, whereby the force of ejected fragment debris off of the calculous surface should equal the force of retropulsion displacing the stone. We tested the hypothesis that retropulsion occurs as a result of ejected stone debris. MATERIALS AND METHODS: Uniform calculous phantoms were irradiated with holmium:YAG energy in air and in water. Optical fiber diameter and pulse energy were varied. Motion of the phantom was monitored with high speed video imaging. Laser induced crater volume and geometry were characterized by optical coherence tomography. To determine the direction of plume laser burn paper was irradiated at various incident angles. RESULTS: Retropulsion was greater for phantoms irradiated in air versus water. Retropulsion increased as fiber diameter increased and as pulse energy increased (p <0.001). Crater volumes increased as pulse energy increased (p <0.05) and generally increased as fiber diameter increased. Crater geometry was wide and shallow for larger fibers, and narrow and deeper for smaller fibers. The ejected plume propagated in the direction normal to the burn paper surface regardless of the laser incident angle. CONCLUSIONS: Retropulsion increases as pulse energy and optical fiber diameter increase. Vector analysis of the ejected plume and crater geometry explains increased retropulsion using larger optical fibers. Holmium:YAG lithotripsy should be performed with small optical fibers to limit retropulsion.
Authors: Ronald Sroka; Nicolas Haseke; Thomas Pongratz; Volkmar Hecht; Derya Tilki; Christian G Stief; Markus Jürgen Bader Journal: Lasers Med Sci Date: 2011-10-20 Impact factor: 3.161
Authors: Jian James Zhang; Danop Rajabhandharaks; Jason Rongwei Xuan; Ray W J Chia; Thomas Hasenberg Journal: Lasers Med Sci Date: 2017-04-12 Impact factor: 3.161
Authors: Maximilian Eisel; Stephan Ströbl; Thomas Pongratz; Frank Strittmatter; Ronald Sroka Journal: Biomed Opt Express Date: 2018-10-02 Impact factor: 3.732
Authors: A S Sandhu; A Srivastava; P Madhusoodanan; T Sinha; S K Gupta; A Kumar; G S Sethi; R Khanna Journal: Med J Armed Forces India Date: 2011-07-21