Literature DB >> 11710047

Characterization of the molar masses of hemicelluloses from wood and pulps employing size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spectrometry.

A Jacobs1, O Dahlman.   

Abstract

The molar mass parameters for arabino-4-O-methylglucuronoxylans, arabinohexenuronoxylans, 4-O-methylglucuronoxylans, hexenuronoxylans, and galactoglucomannans extracted from wood and pulps have been determined. To characterize different types of hemicelluloses, delignified wood (spruce, pine, larch, aspen, and birch) and chemical pulps (unbleached and totally chlorine-free bleached) were extracted with dimethyl sulfoxide (DMSO) or alkaline aqueous solutions. Size exclusion chromatography (SEC) with off-line matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-MS) were employed to characterize the molar masses. The hemicellulose extracts were separated by SEC into fractions each containing components with a narrow range of molar masses and the average molar mass of each fraction subsequently determined by MALDI-MS. The molar mass parameters for the hemicelluloses were then calculated on the basis of the SEC distribution curves and MALDI-MS spectra. As expected, in most cases the hemicelluloses extracted from wood (holocellulose) exhibited higher molar masses than did the corresponding hemicelluloses from chemical pulps. The molar mass parameters for hemicelluloses isolated from pulps derived from cooking samples of the same batch of softwood chips decreased in the following order: ASAM pulp > MSSAQ pulp > kraft pulp. The lowest molar masses were demonstrated by the glucuronoxylans extracted from pulps obtained by cooking with acidic sulfite. The xylans from bleached kraft pulp were characterized by molar masses that were only slightly lower than those of the corresponding xylans from unbleached pulp. The xylans extracted into DMSO exhibited somewhat lower molar masses than did the corresponding xylans extracted into alkaline aqueous solutions. In all cases the range of molar masses demonstrated by the hemicelluloses investigated was found to be rather narrow, i.e., the polydispersity index Mw/Mn was found to be approximately 1.1-1.4.

Entities:  

Mesh:

Substances:

Year:  2001        PMID: 11710047     DOI: 10.1021/bm010050b

Source DB:  PubMed          Journal:  Biomacromolecules        ISSN: 1525-7797            Impact factor:   6.988


  7 in total

1.  Biochemical characterization of xylan xylosyltransferases involved in wood formation in poplar.

Authors:  Chanhui Lee; Ruiqin Zhong; Zheng-Hua Ye
Journal:  Plant Signal Behav       Date:  2012-03-01

2.  Identification of a disaccharide side chain 2-O-α-D-galactopyranosyl-α-D-glucuronic acid in Arabidopsis xylan.

Authors:  Ruiqin Zhong; Quincy Teng; Chanhui Lee; Zheng-Hua Ye
Journal:  Plant Signal Behav       Date:  2014-02-12

3.  Thermal behaviour and tolerance to ionic liquid [emim]OAc in GH10 xylanase from Thermoascus aurantiacus SL16W.

Authors:  Niwat Chawachart; Sasikala Anbarasan; Samuel Turunen; He Li; Chartchai Khanongnuch; Michael Hummel; Herbert Sixta; Tom Granström; Saisamorn Lumyong; Ossi Turunen
Journal:  Extremophiles       Date:  2014-07-30       Impact factor: 2.395

4.  Influence of mechanical operation on the biodelignification of Leucaena leucocephala by xylanase treatment.

Authors:  Laxman Kumar Pandey; Amit Kumar; Dharm Dutt; S P Singh
Journal:  3 Biotech       Date:  2021-12-16       Impact factor: 2.406

5.  In situ cross-linking of stimuli-responsive hemicellulose microgels during spray drying.

Authors:  Weifeng Zhao; Robertus Wahyu N Nugroho; Karin Odelius; Ulrica Edlund; Changsheng Zhao; Ann-Christine Albertsson
Journal:  ACS Appl Mater Interfaces       Date:  2015-02-09       Impact factor: 9.229

6.  In Situ Synthesis of Magnetic Field-Responsive Hemicellulose Hydrogels for Drug Delivery.

Authors:  Weifeng Zhao; Karin Odelius; Ulrica Edlund; Changsheng Zhao; Ann-Christine Albertsson
Journal:  Biomacromolecules       Date:  2015-07-30       Impact factor: 6.988

7.  Performance of three delignifying pretreatments on hardwoods: hydrolysis yields, comprehensive mass balances, and lignin properties.

Authors:  Aditya Bhalla; Charles M Cai; Feng Xu; Sandip K Singh; Namita Bansal; Thanaphong Phongpreecha; Tanmoy Dutta; Cliff E Foster; Rajeev Kumar; Blake A Simmons; Seema Singh; Charles E Wyman; Eric L Hegg; David B Hodge
Journal:  Biotechnol Biofuels       Date:  2019-09-09       Impact factor: 6.040

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.