Literature DB >> 11367968

The suitability of packable resin-based composites for posterior restorations.

J Manhart1, H Y Chen, R Hickel.   

Abstract

BACKGROUND: Packable composites, promoted for the restoration of stress-bearing posterior teeth, have captured clinicians' interest.
METHODS: The authors tested three packable composites (Alert, Jeneric/Pentron; Solitaire, Heraeus Kulzer, Wehrheim, Germany; SureFil, Dentsply De Trey, Konstanz, Germany); a new packable organically modified ceramic, or ormocer (Definite, Degussa AG, Hanau, Germany); a hybrid composite (Tetric Ceram, Ivoclar Vivadent, Schaan, Liechtenstein) and an ion-releasing composite (Ariston pHc, Ivoclar Vivadent, Schaan, Liechtenstein). They determined modulus of elasticity according to EN 24049:1993 of the European Committee for Standardization. They measured Vickers hardness using a 200-gram load for 40 seconds. To determine the materials' depth of cure, they used both a scraping method (International Standards Organization standard CD 4049:1997) and a hardness profiling method.
RESULTS: The authors calculated means and standard deviations from 10 replications of each test and used one-way analysis of variance and post hoc Tukey tests (alpha = .05). The materials had significant differences (P < .001) in all characteristics. Solitaire had the significantly lowest elastic modulus and microhardness; Alert had the highest values for these characteristics. Ariston pHc exhibited the significantly lowest depth of cure. There was a significant correlation between the two methods of measuring depth of cure (r2 = 0.9945; P = .021).
CONCLUSIONS: The material group of packable composites is rather inhomogeneous in terms of mechanical and physical data. Our data suggest that bulk curing of packable composites in deep cavities still is not recommendable. CLINICAL IMPLICATIONS: The clinician needs to select packable composites carefully, as it seems that not all of these materials quality for stress-loaded posterior restorations.

Entities:  

Mesh:

Substances:

Year:  2001        PMID: 11367968     DOI: 10.14219/jada.archive.2001.0241

Source DB:  PubMed          Journal:  J Am Dent Assoc        ISSN: 0002-8177            Impact factor:   3.634


  8 in total

1.  Marginal and internal adaptation of Class II ormocer and hybrid resin composite restorations before and after load cycling.

Authors:  N Kournetas; M Chakmakchi; A Kakaboura; C Rahiotis; J Geis-Gerstorfer
Journal:  Clin Oral Investig       Date:  2004-07-10       Impact factor: 3.573

2.  Comparative study of the wear behavior of composites for posterior restorations.

Authors:  Cecilia P Turssi; Juliana J Faraoni-Romano; Márcio de Menezes; Mônica C Serra
Journal:  J Mater Sci Mater Med       Date:  2007-01       Impact factor: 3.896

3.  Three-year results of a randomized controlled clinical trial of the posterior composite QuiXfil in class I and II cavities.

Authors:  Juergen Manhart; Hong-Yan Chen; Reinhard Hickel
Journal:  Clin Oral Investig       Date:  2008-11-08       Impact factor: 3.573

4.  Clinical evaluation of two packable posterior composites: 2-year follow-up.

Authors:  T C Fagundes; T J E Barata; E Bresciani; D F G Cefaly; M F F Jorge; M F L Navarro
Journal:  Clin Oral Investig       Date:  2006-07-06       Impact factor: 3.573

5.  Influence of irradiation time on subsurface degree of conversion and microhardness of high-viscosity bulk-fill resin composites.

Authors:  Z Tarle; T Attin; D Marovic; L Andermatt; M Ristic; T T Tauböck
Journal:  Clin Oral Investig       Date:  2014-08-21       Impact factor: 3.573

6.  Effect of Extension and Type of Composite-Restored Class II Cavities on Biomechanical Properties of Teeth: A Three Dimensional Finite Element Analysis.

Authors:  Azam Valian; Elham Moravej-Salehi; Allahyar Geramy; Elham Faramarzi
Journal:  J Dent (Tehran)       Date:  2015-02

7.  Polymerization Kinetics and Development of Polymerization Shrinkage Stress in Rapid High-Intensity Light-Curing.

Authors:  Matej Par; Phoebe Burrer; Katica Prskalo; Saskia Schmid; Anna-Lena Schubiger; Danijela Marovic; Zrinka Tarle; Thomas Attin; Tobias T Tauböck
Journal:  Polymers (Basel)       Date:  2022-08-12       Impact factor: 4.967

8.  Microhardness of composite resins at different depths varying the post-irradiation time.

Authors:  Juliane Cristina Ciccone-Nogueira; Mariana Cristina Borsatto; Wanessa Christine de Souza-Zaron; Renata Pereira Ramos; Regina Guenka Palma-Dibb
Journal:  J Appl Oral Sci       Date:  2007-08       Impact factor: 2.698

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.