Literature DB >> 11012056

In vitro biomechanical analysis of three anterior thoracolumbar implants.

P W Hitchon1, V K Goel, T N Rogge, J C Torner, A P Dooris, J S Drake, S J Yang, K Totoribe.   

Abstract

OBJECT: The goal of this study was to evaluate the comparative efficacy of three commonly used anterior thoracolumbar implants: the anterior thoracolumbar locking plate (ATLP), the smooth-rod Kaneda (SRK), and the Z-plate.
METHODS: In vitro testing was performed using the T9-L3 segments of human cadaver spines. An L-1 corpectomy was performed, and stabilization was achieved using one of three anterior devices: the ATLP in nine spines, the SRK in 10, and the Z-plate in 10. Specimens were load tested with 1.5-, 3-, 4.5-, and 6-Nm in flexion and extension, right and left lateral bending, and right and left axial rotation. Angular motion was monitored using two video cameras that tracked light-emitting diodes attached to the vertebral bodies. Testing was performed in the intact state in spines stabilized with one of the three aforementioned devices after the devices had been fatigued to 5000 cycles at +/- 3 Nm and after bilateral facetectomy. There was no difference in the stability of the intact spines with use of the three devices. There were no differences between the SRK- and Z-plate-instrumented spines in any state. In extension testing, the mean angular rotation (+/- standard deviation) of spines instrumented with the SRK (4.7 +/- 3.2 degrees) and Z-plate devices (3.3 +/- 2.3 degrees) was more rigid than that observed in the ATLP-stabilized spines (9 +/- 4.8 degrees). In flexion testing after induction of fatigue, however, only the SRK (4.2 +/- 3.2 degrees) was stiffer than the ATLP (8.9 +/- 4.9 degrees). Also, in extension postfatigue, only the SRK (2.4 +/- 3.4 degrees) provided more rigid fixation than the ATLP (6.4 +/- 2.9 degrees). All three devices were equally unstable after bilateral facetectomy. The SRK and Z-plate anterior thoracolumbar implants were both more rigid than the ATLP, and of the former two the SRK was stiffer.
CONCLUSIONS: The authors' results suggest that in cases in which profile and ease of application are not of paramount importance, the SRK has an advantage over the other two tested implants in achieving rigid fixation immediately postoperatively.

Entities:  

Mesh:

Year:  2000        PMID: 11012056     DOI: 10.3171/spi.2000.93.2.0252

Source DB:  PubMed          Journal:  J Neurosurg        ISSN: 0022-3085            Impact factor:   5.115


  9 in total

1.  Thoracolumbar fracture stabilization: comparative biomechanical evaluation of a new video-assisted implantable system.

Authors:  M Schultheiss; E Hartwig; L Kinzl; L Claes; H-J Wilke
Journal:  Eur Spine J       Date:  2003-11-22       Impact factor: 3.134

2.  Solvent-preserved, bovine cancellous bone blocks used for reconstruction of thoracolumbar fractures in minimally invasive spinal surgery-first clinical results.

Authors:  Markus Schultheiss; Michael Sarkar; Markus Arand; Michael Kramer; Hans-Joachim Wilke; Lothar Kinzl; Erich Hartwig
Journal:  Eur Spine J       Date:  2004-07-10       Impact factor: 3.134

3.  Influence of screw-cement enhancement on the stability of anterior thoracolumbar fracture stabilization with circumferential instability.

Authors:  Markus Schultheiss; Erich Hartwig; Lutz Claes; Lothar Kinzl; Hans-Joachim Wilke
Journal:  Eur Spine J       Date:  2004-06-22       Impact factor: 3.134

4.  Contribution of Round vs. Rectangular Expandable Cage Endcaps to Spinal Stability in a Cadaveric Corpectomy Model.

Authors:  Gregory M Mundis; Robert K Eastlack; Payam Moazzaz; Alexander W L Turner; G Bryan Cornwall
Journal:  Int J Spine Surg       Date:  2015-10-22

5.  Biomechanical evaluation of an interfacet joint decompression and stabilization system.

Authors:  Jeremi M Leasure; Jenni Buckley
Journal:  J Biomech Eng       Date:  2014-07       Impact factor: 2.097

6.  Range of motion after thoracolumbar corpectomy: evaluation of analogous constructs with a novel low-profile anterior dual-rod system and a traditional dual-rod system.

Authors:  Martin Gehrchen; Sajan K Hegde; Mark Moldavsky; Suresh Chinthukunta; Manasa Gudipally; Brandon Bucklen; Kanaan Salloum; Saif Khalil
Journal:  Eur Spine J       Date:  2015-04-28       Impact factor: 3.134

7.  Integrated Fixation Cage Loosening Under Fatigue Loading.

Authors:  Srinidhi Nagaraja; Vivek Palepu
Journal:  Int J Spine Surg       Date:  2017-06-28

8.  Biomechanical in vitro comparison of different mono- and bisegmental anterior procedures with regard to the strategy for fracture stabilisation using minimally invasive techniques.

Authors:  Markus Schultheiss; Erich Hartwig; Michael Sarkar; Lothar Kinzl; Lutz Claes; Hans-Joachim Wilke
Journal:  Eur Spine J       Date:  2005-02-04       Impact factor: 3.134

9.  Biomechanical Testing of Spinal Segment Fixed by Arcofix System on the Swine Spine.

Authors:  Martin Kelbl; Jan Kocis; Radek Vesely; Zdenek Florian; Tomas Navrat; Petr Vosynek
Journal:  Asian Spine J       Date:  2015-07-28
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.