Literature DB >> 10709047

Method for marginal measurements of restorations: accessory device for toolmakers microscope.

O Ushiwata1, J V de Moraes.   

Abstract

Standardization of measurements for marginal fit of castings is critical. This study describes the fabrication of a device that allowed fixation of specimens on a Toolmakers microscope with identical conditions according to tri-dimensional positioning of specimens, measuring location, and seating force. The device also allows mapping of the marginal discrepancies on the entire marginal perimeter of the tooth preparation.

Mesh：

Substances：

Year:  2000        PMID： 10709047     DOI： 10.1016/s0022-3913(00)70141-7

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  8 in total

1.  A comparison of the marginal adaptation of cathode-arc vapor-deposited titanium and cast base metal copings.

Authors:  Jean C Wu; Li-Chung Lai; Cherilyn G Sheets; James Earthman; Robert Newcomb
Journal:  J Prosthet Dent       Date:  2011-06       Impact factor: 3.426

2.  Comparative Evaluation of Marginal and Internal Gap of Co-Cr Copings Fabricated from Conventional Wax Pattern, 3D Printed Resin Pattern and DMLS Tech: An In Vitro Study.

Authors:  Eswaran Bhaskaran; N S Azhagarasan; Saket Miglani; T Ilango; G Phani Krishna; B Gajapathi
Journal:  J Indian Prosthodont Soc       Date:  2013-05-03

3.  A comparitive evaluation of the marginal adaptation of zirconium coping and nickel-chromium coping using shoulder finish line design: an invitro study.

Authors:  S Chandrashekar; Ravindra C Savadi; Malathi Dayalan; G T Prashanth Reddy
Journal:  J Indian Prosthodont Soc       Date:  2012-09-30

4.  The effect of various veneering techniques on the marginal fit of zirconia copings.

Authors:  Kianoosh Torabi; Mahroo Vojdani; Rashin Giti; Masumeh Taghva; Soheil Pardis
Journal:  J Adv Prosthodont       Date:  2015-06-23       Impact factor: 1.904

5.  Marginal accuracy of nickel chromium copings fabricated by conventional and accelerated casting procedures, produced with ringless and metal ring investment procedures: A comparative in vitro study.

Authors:  Deepa Alex; Y Bharath Shetty; Glynis Anita Miranda; M Bharath Prabhu; Reshma Karkera
Journal:  J Indian Prosthodont Soc       Date:  2015 Jan-Mar

6.  Comparative Evaluation of the Marginal Adaptation of Cast Ni-Cr Copings, Direct Metal Laser Sintering Co-Cr Copings, and Computer-aided Design and Computer-aided Manufacturing Zr Copings: An In-vitro Study.

Authors:  Lokanathanbalaji Doddy; Sesha Reddy; Sashideepth Reddy; Narendra R
Journal:  Cureus       Date:  2019-11-07

Review 7.  Fixed Prosthetic Restorations and Periodontal Health: A Narrative Review.

Authors:  Viritpon Srimaneepong; Artak Heboyan; Muhammad Sohail Zafar; Zohaib Khurshid; Anand Marya; Gustavo V O Fernandes; Dinesh Rokaya
Journal:  J Funct Biomater       Date:  2022-02-01

8.  Accuracy of Three Impression Materials on the Totally Edentulous Maxilla: In Vitro/In Silico Comparative Analysis.

Authors:  Fernando Zarone; Gennaro Ruggiero; Maria Irene Di Mauro; Gianrico Spagnuolo; Marco Ferrari; Roberto Sorrentino
Journal:  Materials (Basel)       Date:  2020-01-22       Impact factor: 3.623
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.