Literature DB >> 10218055

A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic.

J A Sorensen1, M Cruz, W T Mito, O Raffeiner, H R Meredith, H P Foser.   

Abstract

A lithium disilicate glass-ceramic material has recently been developed for the fabrication of 3-unit fixed partial dentures. Conducted on 60 restorations, this initial trial attempted to define clinical indications and establish design principles for fixed partial dentures fabricated of this ceramic material. The design requisites varied depending on placement on the arch, and the authors concluded that lithium disilicate restorations caused reduced antagonist structure or opposing tooth wear. This investigation demonstrated that when a novel ceramic system was utilized for 3-unit restorations replacing up to the first premolar and attained minimal criteria for connector dimensions, an acceptable clinical success rate was achieved.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 10218055

Source DB:  PubMed          Journal:  Pract Periodontics Aesthet Dent        ISSN: 1042-2722


  18 in total

1.  Stress distribution on a three-unit implant-supported zirconia framework. A 3D finite element analysis and fatigue test.

Authors:  G Sannino; A Pozzi; R Schiavetti; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2012-07-17

2.  Adaptation of all-ceramic fixed partial dentures.

Authors:  Márcia Borba; Paulo F Cesar; Jason A Griggs; Álvaro Della Bona
Journal:  Dent Mater       Date:  2011-09-13       Impact factor: 5.304

3.  Randomized, controlled clinical trial of bilayer ceramic and metal-ceramic crown performance.

Authors:  Josephine Esquivel-Upshaw; William Rose; Erica Oliveira; Mark Yang; Arthur E Clark; Kenneth Anusavice
Journal:  J Prosthodont       Date:  2012-09-14       Impact factor: 2.752

4.  Monolithic and bi-layer CAD/CAM lithium-disilicate versus metal-ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue.

Authors:  Stefan Schultheis; Joerg R Strub; Thomas A Gerds; Petra C Guess
Journal:  Clin Oral Investig       Date:  2012-09-22       Impact factor: 3.573

5.  Fracture surface analysis of clinically failed fixed partial dentures.

Authors:  B Taskonak; J J Mecholsky; K J Anusavice
Journal:  J Dent Res       Date:  2006-03       Impact factor: 6.116

6.  Randomized clinical trial of implant-supported ceramic-ceramic and metal-ceramic fixed dental prostheses: preliminary results.

Authors:  Josephine F Esquivel-Upshaw; Arthur E Clark; Jonathan J Shuster; Kenneth J Anusavice
Journal:  J Prosthodont       Date:  2013-06-12       Impact factor: 2.752

7.  Sintering behavior and mechanical properties of zirconia compacts fabricated by uniaxial press forming.

Authors:  Gye-Jeong Oh; Kwi-Dug Yun; Kwang-Min Lee; Hyun-Pil Lim; Sang-Won Park
Journal:  J Adv Prosthodont       Date:  2010-09-30       Impact factor: 1.904

8.  Conservative approach for restoring posterior missing tooth with fiber reinforcement materials: four clinical reports.

Authors:  Emine Sirin Karaarslan; Ertan Ertas; Semih Ozsevik; Aslihan Usumez
Journal:  Eur J Dent       Date:  2011-08

9.  Influence of Connector Width on the Stress Distribution of Posterior Bridges under Loading.

Authors:  S Mir Mohammad Rezaei; H Heidarifar; F Fallahi Arezodar; A Azary; S Mokhtarykhoee
Journal:  J Dent (Tehran)       Date:  2011-06-30

10.  Effect of framework design on fracture resistance of zirconium oxide posterior fixed partial dentures.

Authors:  Hadi Salimi; Ramin Mosharraf; Omid Savabi
Journal:  Dent Res J (Isfahan)       Date:  2012-11
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.