BACKGROUND: Study of the vascular response to stent implantation has been hampered by difficulties in sectioning metal and tissue without distortion of the tissue stent interface. The metal is often removed before histochemical processing, causing a loss of arterial architecture. Histological and immunohistochemical sections should be 5 microns with an intact tissue stent interface. OBJECTIVES: To identify the most suitable cutting and grinding equipment, embedding resin, and slides for producing thin sections of stented arteries with the stent wires in situ for histological, immunohistochemical, and transmission electron microscopic (TEM) analyses. METHODS: 20 balloon stainless steel stents were implanted in the coronary arteries of 10 pigs. Twenty eight days later the stented arterial segments were excised, formalin fixed, embedded in five different resins (Epon 812, LR white, T9100, T8100, and JB4), and sectioned with two different high speed saws and a grinder for histological, immunohistochemical, and TEM analyses. Five stented human arteries were obtained at necropsy and processed using the best of the reported methods. RESULTS: The Isomet precision saw and grinder/polisher unit reliably produced 5 microns sections with most embedding resins; minimum section thickness with the horizontal saw was 400 microns. Resin T8100, a glycol methacrylate, enabled satisfactory sectioning, grinding, and histological (toluidine blue, haematoxylin and eosin, and trichromatic and polychromatic stains) and immunohistochemical analyses (alpha smooth muscle actin, von Willebrand factor, vimentin, proliferating cell nuclear antigen, and CD68 (mac 387)). T9100 and T8100 embedded stented sections were suitable for ultrastructural examination with TEM. Stented human arterial sections showed preserved arterial architecture with the struts in situ. CONCLUSION: This study identified the optimal methods for embedding, sawing, grinding, and slide mounting of stented arteries to achieve 5 microns sections with an intact tissue metal interface, excellent surface qualities, histological and immunohistochemical staining properties, and suitability for TEM examination. The technique is applicable to experimental and clinical specimens.
BACKGROUND: Study of the vascular response to stent implantation has been hampered by difficulties in sectioning metal and tissue without distortion of the tissue stent interface. The metal is often removed before histochemical processing, causing a loss of arterial architecture. Histological and immunohistochemical sections should be 5 microns with an intact tissue stent interface. OBJECTIVES: To identify the most suitable cutting and grinding equipment, embedding resin, and slides for producing thin sections of stented arteries with the stent wires in situ for histological, immunohistochemical, and transmission electron microscopic (TEM) analyses. METHODS: 20 balloon stainless steel stents were implanted in the coronary arteries of 10 pigs. Twenty eight days later the stented arterial segments were excised, formalin fixed, embedded in five different resins (Epon 812, LR white, T9100, T8100, and JB4), and sectioned with two different high speed saws and a grinder for histological, immunohistochemical, and TEM analyses. Five stented human arteries were obtained at necropsy and processed using the best of the reported methods. RESULTS: The Isomet precision saw and grinder/polisher unit reliably produced 5 microns sections with most embedding resins; minimum section thickness with the horizontal saw was 400 microns. Resin T8100, a glycol methacrylate, enabled satisfactory sectioning, grinding, and histological (toluidine blue, haematoxylin and eosin, and trichromatic and polychromatic stains) and immunohistochemical analyses (alpha smooth muscle actin, von Willebrand factor, vimentin, proliferating cell nuclear antigen, and CD68 (mac 387)). T9100 and T8100 embedded stented sections were suitable for ultrastructural examination with TEM. Stented human arterial sections showed preserved arterial architecture with the struts in situ. CONCLUSION: This study identified the optimal methods for embedding, sawing, grinding, and slide mounting of stented arteries to achieve 5 microns sections with an intact tissue metal interface, excellent surface qualities, histological and immunohistochemical staining properties, and suitability for TEM examination. The technique is applicable to experimental and clinical specimens.
Authors: W J van der Giessen; P W Serruys; H M van Beusekom; L J van Woerkens; H van Loon; L K Soei; B H Strauss; K J Beatt; P D Verdouw Journal: Circulation Date: 1991-05 Impact factor: 29.690
Authors: K H Barth; R Virmani; E P Strecker; M A Savin; D Lindisch; A H Matsumoto; G P Teitelbaum Journal: Radiology Date: 1990-04 Impact factor: 11.105
Authors: F W Bär; J van Oppen; H de Swart; V van Ommen; M Havenith; M Daemen; P Leenders; F H van der Veen; M van Lankveld; M Verduin Journal: Am Heart J Date: 1991-12 Impact factor: 4.749
Authors: R S Schwartz; K C Huber; J G Murphy; W D Edwards; A R Camrud; R E Vlietstra; D R Holmes Journal: J Am Coll Cardiol Date: 1992-02 Impact factor: 24.094
Authors: Ilia Fishbein; Tre Welch; David T Guerrero; Ivan S Alferiev; Richard F Adamo; Michael Chorny; Rohit K Gupte; Yanqing Tang; Robert J Levy Journal: Cardiovasc Pathol Date: 2016-08-20 Impact factor: 2.185