Photoelastic comparison of stress induced by using stainless-steel versus nickel-titanium spreaders in vitro.

The vertical force applied to an endodontic spreader generates stress along the canal walls. Recognizing the potential for this stress may reduce the incidence of vertical root fractures. A photoelastic acrylic model was fabricated to exhibit the stress produced during obturation of curved canals using the lateral condensation technique. Twenty standardized models simulating curved canals (32 degrees) were formed within PL-2 photoelastic acrylic resin blocks. The canals were fitted with a gutta-percha point, and either a stainless-steel or nickel-titanium finger spreader was inserted. An Instron 4502 universal testing machine applied a vertical force of 20 Newtons to the spreader. Quarter wave and polarizing filters were used with backlighting to generate the fringe patterns in the models. Photographs of the resulting stress lines showed that the stainless-steel spreaders created three areas of concentrated stress. The nickel-titanium spreaders induced stress patterns spread out along the surface of the canals, thus reducing the concentration of stress and the potential for vertical root fracture.