Literature DB >> 9754032

OCRA: a concise index for the assessment of exposure to repetitive movements of the upper limbs.

E Occhipinti1.   

Abstract

In the light of data and speculation contained in the literature, and based on procedures illustrated in a previous research project in which the author described and evaluated occupational risk factors associated with work-related musculoskeletal disorders of the upper limbs (WMSDs), this paper proposes a method for calculating a concise index of exposure to repetitive movements of the upper limbs. The proposal, which still has to be substantiated and validated by further studies and applications, is conceptually based on the procedure recommended by the NIOSH for calculating the Lifting Index in manual load handling activities. The concise exposure index (OCRA index) in this case is based on the relationship between the daily number of actions actually performed by the upper limbs in repetitive tasks, and the corresponding number of recommended actions. The latter are calculated on the basis of a constant (30 actions per minute), which represents the action frequency factor; it is valid--hypothetically--under so-called optimal conditions; the constant is diminished case by case (using appropriate factors) as a function of the presence and characteristics of the other risk factors (force, posture, additional elements, recovery periods). Although still experimental, the exposure index can be used to obtain an integrated and concise assessment of the various risk factors analysed and to classify occupational scenarios featuring significant and diversified exposure to such risk factors.

Entities:  

Mesh:

Year:  1998        PMID: 9754032     DOI: 10.1080/001401398186315

Source DB:  PubMed          Journal:  Ergonomics        ISSN: 0014-0139            Impact factor:   2.778


  15 in total

1.  The SOBANE risk management strategy and the Déparis method for the participatory screening of the risks.

Authors:  J B Malchaire
Journal:  Int Arch Occup Environ Health       Date:  2004-06-16       Impact factor: 3.015

2.  The evaluation of ergonomic risk factors among meat cutters working in Jabalpur, India.

Authors:  Prabir Mukhopadhyay; Amaltas Khan
Journal:  Int J Occup Environ Health       Date:  2014-04-11

3.  Musculoskeletal load in and highly repetitive actions of animal facility washroom employees.

Authors:  Claudia Kiermayer; Ulrike M Hoehne-Hückstädt; Markus Brielmeier; Mark Brütting; Rolf Ellegast; Jörg Schmidt
Journal:  J Am Assoc Lab Anim Sci       Date:  2011-09       Impact factor: 1.232

4.  An Analysis of Biomechanical Parameters in OTP Police Physical Intervention Techniques for Occupational Risk Prevention.

Authors:  José C Vera-Jiménez; Felipe L Meléndez-Sánchez; José A Álvarez; Jesús Ayuso
Journal:  Int J Environ Res Public Health       Date:  2022-05-28       Impact factor: 4.614

5.  Incidence of shoulder and neck pain in a working population: effect modification between mechanical and psychosocial exposures at work? Results from a one year follow up of the Malmö shoulder and neck study cohort.

Authors:  Per-Olof Ostergren; Bertil S Hanson; Istvan Balogh; John Ektor-Andersen; Agneta Isacsson; Palle Orbaek; Jörgen Winkel; Sven-Olof Isacsson
Journal:  J Epidemiol Community Health       Date:  2005-09       Impact factor: 3.710

Review 6.  Evaluation of the Impact of the Revised National Institute for Occupational Safety and Health Lifting Equation.

Authors:  Ming-Lun Lu; Vern Putz-Anderson; Arun Garg; Kermit G Davis
Journal:  Hum Factors       Date:  2016-01-28       Impact factor: 2.888

7.  Pooling job physical exposure data from multiple independent studies in a consortium study of carpal tunnel syndrome.

Authors:  Jay M Kapellusch; Arun Garg; Stephen S Bao; Barbara A Silverstein; Susan E Burt; Ann Marie Dale; Bradley A Evanoff; Frederic E Gerr; Carisa Harris-Adamson; Kurt T Hegmann; Linda A Merlino; David M Rempel
Journal:  Ergonomics       Date:  2013-05-22       Impact factor: 2.778

8.  Novel ergonomic postural assessment method (NERPA) using product-process computer aided engineering for ergonomic workplace design.

Authors:  Alberto Sanchez-Lite; Manuel Garcia; Rosario Domingo; Miguel Angel Sebastian
Journal:  PLoS One       Date:  2013-08-16       Impact factor: 3.240

9.  Comparative study of upper limb load assessment and occurrence of musculoskeletal disorders at repetitive task workstations.

Authors:  Danuta Roman-Liu; Joanna Bugajska; Tomasz Tokarski
Journal:  Ind Health       Date:  2014-06-27       Impact factor: 2.179

10.  Comparison of risk assessment procedures used in OCRA and ULRA methods.

Authors:  Danuta Roman-Liu; Anna Groborz; Tomasz Tokarski
Journal:  Ergonomics       Date:  2013-09-16       Impact factor: 2.778

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.