Literature DB >> 9710816

In vitro mechanical property comparison of four resins used for fabrication of provisional fixed restorations.

M F Ireland1, D L Dixon, L C Breeding, M H Ramp.   

Abstract

PURPOSE: This study recorded and compared the flexural elastic moduli and moduli of rupture of four materials (Provipont DC resin, Triad provisional restorative material, Jet acrylic resin, and a 50:50 mixture of Jet acrylic resin and orthodontic resin) used to make provisional restorations.
MATERIAL AND METHODS: Thirty-nine identical 63 x 10 x 3 mm specimens were made from each of the four materials. After 24 hours, 30 days, and 60 days of water storage at 37 degrees C (13 specimens each), standard three-point bend tests were conducted on an Instron universal testing machine at a crosshead speed of 0.5 cm/minute. Stress strain curves were generated, and values for the flexural elastic moduli and moduli of rupture were calculated. Data were subjected to two-way and one-way analyses of variance (alpha = 0.05).
RESULTS: Provipont DC resin exhibited significantly higher flexural elastic moduli and moduli of rupture values at the 24-hour test time. However, Provipont DC resin exhibited the greatest decrease in these values over time.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9710816     DOI: 10.1016/s0022-3913(98)70104-0

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  14 in total

1.  Evaluation of Flexural Strength of Thermocycled Interim Resin Materials Used in Prosthetic Rehabilitation- An In-vitro Study.

Authors:  Krishna Kishore Kadiyala; Mohan Krishna Badisa; Gopinadh Anne; Sampath Chowdary Anche; Sandeep Chiramana; Suresh Babu Muvva; Srujana Zakkula; Ravi Rakesh Dev Jyothula
Journal:  J Clin Diagn Res       Date:  2016-09-01

2.  Effect of Dietary Simulating Solvents on the Mechanical Properties of Provisional Restorative Materials-An In Vitro Study.

Authors:  Bipin Y Muley; Sameera R Shaikh; Mohana M Tagore; Arun N Khalikar
Journal:  J Indian Prosthodont Soc       Date:  2014-06-15

3.  The effect of glass and polyethylene fiber reinforcement on flexural strength of provisional restorative resins: an in vitro study.

Authors:  Parthasarathy Natarajan; C Thulasingam
Journal:  J Indian Prosthodont Soc       Date:  2012-07-14

4.  Comparative Evaluation of Flexural Strength of Provisional Crown and Bridge Materials-An Invitro Study.

Authors:  Ankita Singh; Sandeep Garg
Journal:  J Clin Diagn Res       Date:  2016-08-01

5.  Comparison of polymer-based temporary crown and fixed partial denture materials by diametral tensile strength.

Authors:  Seung-Ryong Ha; Jae-Ho Yang; Jai-Bong Lee; Jung-Suk Han; Sung-Hun Kim
Journal:  J Adv Prosthodont       Date:  2010-03-31       Impact factor: 1.904

6.  In vitro comparison of flexural strength and elastic modulus of three provisional crown materials used in fixed prosthodontics.

Authors:  Vachan Poonacha; Seema Poonacha; Basavaraj Salagundi; P L Rupesh; Rohit Raghavan
Journal:  J Clin Exp Dent       Date:  2013-12-01

7.  In vitro study of fracture strength of provisional crown materials.

Authors:  Isil Karaokutan; Gulsum Sayin; Ozlem Kara
Journal:  J Adv Prosthodont       Date:  2015-02-17       Impact factor: 1.904

8.  Evaluation of the Flexural Strength of Interim Restorative Materials in Fixed Prosthodontics.

Authors:  Hanieh Mehrpour; Ehsan Farjood; Rashin Giti; Alireza Barfi Ghasrdashti; Hossein Heidari
Journal:  J Dent (Shiraz)       Date:  2016-09

9.  Evaluation of hardness and wear resistance of interim restorative materials.

Authors:  Omid Savabi; Farahnaz Nejatidanesh; Mohamad Hossein Fathi; Amir Arsalan Navabi; Ghazal Savabi
Journal:  Dent Res J (Isfahan)       Date:  2013-03

10.  Effect of polyester fiber reinforcement on the mechanical properties of interim fixed partial dentures.

Authors:  N Gopichander; K V Halini Kumarai; M Vasanthakumar
Journal:  Saudi Dent J       Date:  2015-09-01
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.