Stress variations in the human aortic root and valve: the role of anatomic asymmetry.

The asymmetry of the aortic valve and aortic root may influence their biomechanics, yet was not considered in previous valve models. This study developed an anatomically representative model to evaluate the regional stresses of the valve within the root environment. A finite-element model was created from magnetic-resonance images of nine human valve-root specimens, carefully preserving their asymmetry. Regional thicknesses and anisotropic material properties were assigned to higher-order elastic shell elements representing the valve and root. After diastolic pressurization, peak principal stresses were evaluated for the right, left, and noncoronary leaflets and root walls. Valve stresses were highest in the noncoronary leaflet (538 kPa vs right 473 kPa vs left 410 kPa); peak stresses were located at the free margin and belly near the coaptation surfaces (averages 537 and 482 kPa for all leaflets, respectively). Right and noncoronary sinus stresses were 21% and 10% greater than the left sinus. In all sinuses, stresses near the annulus were higher than near the sinotubular junction. Stresses vary across the valve and root, likely due to their inherent morphologic asymmetry and stress sharing. These factors may influence bioprosthetic valve durability and the incidence of isolated sinus dilatation.