Literature DB >> 9617389

Multiple exposure to arsenic, antimony, and other elements in art glass manufacturing.

P Apostoli1, S Giusti, D Bartoli, A Perico, P Bavazzano, L Alessio.   

Abstract

Art glass manufacturing is one of the most interesting examples of exposure to complex mixtures. Among the raw materials used are silica sand, borax, carbonates, nitrates of Ca, Na, K, and a great number of compounds that are mainly oxides of As, Sb, Al, Zn, Cr, Ni, Sn, Se, Cd, Mn, Cu, Co, Fe, Nd, Er, Eu, and La. In six art glass factories that use As or Sb as fining agents, the exposure to these elements was investigated in 32 workers by means of environmental and biological monitoring. Analysis was conducted by atomic absorption spectrometry (AAS) and inductively coupled plasma mass spectrometry (ICP-MS). The results confirmed that As, which is the main carcinogen in glass production, reaches high air concentrations and is generally above the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value-time-weighted average (TLV-TWA) of 10 micrograms/m3. When partly substituted by antimonial compounds, As air concentrations dropped dramatically, while the air levels of Sb (which is considered less toxic but is classified as a class 2B carcinogen by IARC) were relatively low and below the ACGIH TLV-TWA of 500 micrograms/m3. Exposure to As and Sb also differed in the three types of jobs investigated: As was high in oven chargers, Sb was higher in batch mixers, and both elements were low in makers-formers. Eleven to 18 elements were detected: arsenic, Al, Ba, Sb, Pb, and Zn were the elements most frequently measured (in tens, and in some cases hundreds, of micrograms/m3), followed by B, Li, Mn, Se, Sn, Sr, Ce, La, and Nd (in micrograms or in some cases tens of micrograms/m3. The results of biological monitoring for As, Sb, and other elements were in agreement with environmental monitoring data. We concluded that multiple detection of elements is a useful tool (or the evaluation of exposure to complex mixtures such as those used in the art glass industry and that such detection also allows a more accurate evaluation of related epidemiological data.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9617389     DOI: 10.1002/(sici)1097-0274(199807)34:1<65::aid-ajim9>3.0.co;2-p

Source DB:  PubMed          Journal:  Am J Ind Med        ISSN: 0271-3586            Impact factor:   2.214


  5 in total

1.  Biological monitoring of occupational exposure to inorganic arsenic.

Authors:  P Apostoli; D Bartoli; L Alessio; J P Buchet
Journal:  Occup Environ Med       Date:  1999-12       Impact factor: 4.402

2.  Atmospheric fall-out of metals around the Murano glass-making district (Venice, Italy).

Authors:  Paolo Rossini; Gabriele Matteucci; Stefano Guerzoni
Journal:  Environ Sci Pollut Res Int       Date:  2009-03-21       Impact factor: 4.223

3.  The exposure to and health effects of antimony.

Authors:  Ross G Cooper; Adrian P Harrison
Journal:  Indian J Occup Environ Med       Date:  2009-04

4.  Reduction-melting extraction of trace elements from hazardous waste glass from an old glasswork's dump in the southeastern part of Sweden.

Authors:  Yahya Jani; William Hogland
Journal:  Environ Sci Pollut Res Int       Date:  2017-09-24       Impact factor: 4.223

5.  Exhaled breath condensate as a suitable matrix to assess lung dose and effects in workers exposed to cobalt and tungsten.

Authors:  Matteo Goldoni; Simona Catalani; Giuseppe De Palma; Paola Manini; Olga Acampa; Massimo Corradi; Roberto Bergonzi; Pietro Apostoli; Antonio Mutti
Journal:  Environ Health Perspect       Date:  2004-09       Impact factor: 9.031

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.