Literature DB >> 19306028

Atmospheric fall-out of metals around the Murano glass-making district (Venice, Italy).

Paolo Rossini1, Gabriele Matteucci, Stefano Guerzoni.   

Abstract

BACKGROUND, AIM AND SCOPE: Murano's glass-makers have held a monopoly on quality glass-making for centuries known all over the world. Artistic glass manufacture entails exposure to complex mixtures of pollutants, including metals. A few studies have reported high levels of trace elements in marine waters, sediments and mussels around Murano and shown that emissions from Murano glass-making workshops significantly influence air quality in the Venice area. Nevertheless, to date, there is very little information on atmospheric concentrations and virtually none on atmospheric deposition fluxes of trace elements around the island. This study presents data on the distribution of trace elements in the air and atmospheric depositions around Murano, based on a 2-year sampling period.
MATERIALS AND METHODS: Airborne PM10 particulate matter was collected daily in the period December 2001-June 2003 (254 air samples), and atmospheric depositions were collected every 19 +/- 6 days, in the period August 2001-July 2003 (38 samples) on the roof of the Experimental Glass Laboratory on the island of Murano. All samples were analysed by ICP-MS for As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sb, Se and Zn contents.
RESULTS: Atmospheric concentrations of As, Cd, Cr, Ni, Pb, Se and Zn were 1-2 orders of magnitude greater on the island of Murano than in the nearest urban areas (Venice and Mestre), with values higher than those reported for European industrial sites. The atmospheric deposition fluxes of all elements were also higher in Murano than those detected by other studies in Venice and Mestre and in the Porto Marghera industrial zone, with As, Cd, Sb and Se 1-2 orders of magnitude higher. DISCUSSION: In order to study the spatial variability of the atmospheric fall-out, data from other sampling stations belonging to Venice atmospheric deposition monitoring networks were used. A decreasing gradient from Murano to the closer leeward stations was observed for As, Cd and Se. Pb and Zn deposition fluxes in Venice were also comparable to those observed in the Porto Marghera industrial zone, thus, indicating a similar or even higher level of contamination. Principal component analysis confirmed significant contamination from the glassworks.
CONCLUSIONS: As shown by our study, atmospheric loadings of metals around Murano are significant. These observations confirm that emissions from Murano also significantly influence atmospheric deposition in the Venice area. Specifically, the mean daily Cd flux in the most affected area, which includes the whole of the historic city centre of Venice, is approximately 18 microg m(-2) day(-1), i.e. more than 65 times higher than the Dutch limit and more than three times higher than that of Germany. RECOMMENDATIONS AND PERSPECTIVES: On the basis of our data, there is a clear-cut need for remedial action in the Lagoon of Venice. Monitoring is indispensable, so that the efficacy of remedial measures can be evaluated and appropriate information about risks for human health and well-being can be made available. The atmospheric compartment must also be considered by Italian and European law which, until now, has not yet established any standard for atmospheric deposition.

Entities:  

Mesh:

Substances:

Year:  2009        PMID: 19306028     DOI: 10.1007/s11356-009-0122-8

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  7 in total

Review 1.  Particulate matter in the atmosphere: which particle properties are important for its effects on health?

Authors:  R M Harrison; J Yin
Journal:  Sci Total Environ       Date:  2000-04-17       Impact factor: 7.963

2.  Atmospheric bulk deposition to the Lagoon of Venice Part II. Source apportionment analysis near the industrial zone of Porto Marghera, Italy.

Authors:  S Guerzoni; G Rampazzo; E Molinaroli; P Rossini
Journal:  Environ Int       Date:  2005-09       Impact factor: 9.621

3.  Atmospheric bulk deposition to the lagoon of Venice Part I. Fluxes of metals, nutrients and organic contaminants.

Authors:  P Rossini; S Guerzoni; E Molinaroli; G Rampazzo; A De Lazzari; A Zancanaro
Journal:  Environ Int       Date:  2005-09       Impact factor: 9.621

4.  Screening-level ecological risk assessment of polychlorinated dibenzo-p-dioxins and dibenzofurans in sediments and aquatic biota from the Venice Lagoon, Italy.

Authors:  R Wenning; D Dodge; B Peck; K Shearer; W Luksemburg; S Della Sala; R Scazzola
Journal:  Chemosphere       Date:  2000 May-Jun       Impact factor: 7.086

5.  Multiple exposure to arsenic, antimony, and other elements in art glass manufacturing.

Authors:  P Apostoli; S Giusti; D Bartoli; A Perico; P Bavazzano; L Alessio
Journal:  Am J Ind Med       Date:  1998-07       Impact factor: 2.214

6.  Correlations among inorganic and organic elements in particulate matter (PM10) in urban area of Venezia-Mestre.

Authors:  Ilaria Mantovan; Nadia Rado; Giancarlo Rampazzo; Flavia Visin
Journal:  Ann Chim       Date:  2003-04

7.  Geochemical characterization of PM10 emitted by glass factories in Murano, Venice (Italy).

Authors:  Giancarlo Rampazzo; Mauro Masiol; Flavia Visin; Egisto Rampado; Bruno Pavoni
Journal:  Chemosphere       Date:  2008-03-06       Impact factor: 7.086

  7 in total
  5 in total

1.  Application of spectrometric analysis to the identification of pollution sources causing cultural heritage damage.

Authors:  C M Belfiore; D Barca; A Bonazza; V Comite; M F La Russa; A Pezzino; S A Ruffolo; C Sabbioni
Journal:  Environ Sci Pollut Res Int       Date:  2013-06-07       Impact factor: 4.223

2.  Characterization of As and trace metals embedded in PM10 particles in Puebla City, México.

Authors:  S S Morales-García; P F Rodríguez-Espinosa; M P Jonathan; M Navarrete-López; M A Herrera-García; N P Muñoz-Sevilla
Journal:  Environ Monit Assess       Date:  2013-07-30       Impact factor: 2.513

3.  A comparative study between the fluxes of trace elements in bulk atmospheric deposition at industrial, urban, traffic, and rural sites.

Authors:  I Fernández-Olmo; M Puente; A Irabien
Journal:  Environ Sci Pollut Res Int       Date:  2015-05-05       Impact factor: 4.223

4.  Release of mobile forms of hazardous elements from glassworks fly ash into soils.

Authors:  Martin Udatný; Martin Mihaljevič; Ondřej Šebek
Journal:  Environ Geochem Health       Date:  2014-04-17       Impact factor: 4.609

5.  Reduction-melting extraction of trace elements from hazardous waste glass from an old glasswork's dump in the southeastern part of Sweden.

Authors:  Yahya Jani; William Hogland
Journal:  Environ Sci Pollut Res Int       Date:  2017-09-24       Impact factor: 4.223

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.