Literature DB >> 9563384

A comparison of hydroxyapatite-coated, titanium-coated, and uncoated tapered external-fixation pins. An in vivo study in sheep.

A Moroni1, S Toksvig-Larsen, M C Maltarello, L Orienti, S Stea, S Giannini.   

Abstract

Three types of surfaces for external fixation pins were compared. One hundred and eight stainless-steel tapered 5/6-millimeter pins were divided into three groups: thirty-six pins remained uncoated (Group A), thirty-six were plasma-sprayed with hydroxyapatite (Group B), and thirty-six were plasma-sprayed with titanium (Group C). The pins were implanted in the left tibia of eighteen sheep, with each sheep receiving six pins from the same group. A unilateral fixator then was assembled on the pins. The medial aspect of the mid-part of the tibial diaphysis was exposed, and a five-millimeter-long cylinder of bone was removed so that load would be borne by the bone-pin interfaces. Six weeks after the procedure, radiographs demonstrated rarefaction of twenty-nine pin tracks in Group A, fifteen in Group B, and thirty in Group C (p = 0.021 for Group A compared with Group B and p = 0.016 for Group B compared with Group C). The mean final insertion torque (and standard deviation) was 4360+/-1050 newton-millimeters in Group A, 3420+/-676 newton-millimeters in Group B, and 3740+/-643 newton-millimeters in Group C. With the numbers available, no significant differences could be detected among these values. The mean extraction torque was 253+/-175 newton-millimeters in Group A, 3360+/-1260 newton-millimeters in Group B, and 1720+/-1030 newton-millimeters in Group C (p = 0.002 for Group A compared with Group B, p = 0.017 for Group A compared with Group C, and p = 0.03 for Group B compared with Group C). The extraction torque was significantly lower than the corresponding insertion torque in both Group A (p < 0.001) and Group C (p = 0.003); no significant difference could be found, with the numbers available, in Group B (hydroxyapatite-coated pins). At sixty times magnification, direct contact was seen along a mean of 16+/-9 per cent of the bone-pin interface in Group A, 30+/-12 per cent of the interface in Group B, and 28+/-15 per cent of the interface in Group C (p = 0.042 for Group A compared with Group C). However, at 10,000 times magnification, direct bone-pin contact was found only in Group B.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9563384     DOI: 10.2106/00004623-199804000-00011

Source DB:  PubMed          Journal:  J Bone Joint Surg Am        ISSN: 0021-9355            Impact factor:   5.284


  13 in total

1.  Effect of annealing titanium on in vitro bioactivity.

Authors:  Kyu-Seog Hwang; Young-Hwan Lee; Bo-An Kang; Sang-Bok Kim; Jeong-Sun Oh
Journal:  J Mater Sci Mater Med       Date:  2003-06       Impact factor: 3.896

2.  Microstructural analysis of implant-bone interface of hydroxyapatite-coated and uncoated Schanz screws.

Authors:  M Cimerman; A Cör; M Ceh; A Kristan; J Pizem; M Tonin
Journal:  J Mater Sci Mater Med       Date:  2005-07       Impact factor: 3.896

Review 3.  Internal fixation of osteoporotic fractures.

Authors:  David L Rothberg; Mark A Lee
Journal:  Curr Osteoporos Rep       Date:  2015-02       Impact factor: 5.096

4.  Fracture healing and drug therapies in osteoporosis.

Authors:  Amy Hoang-Kim; Letizia Gelsomini; Deianira Luciani; Antonio Moroni; Sandro Giannini
Journal:  Clin Cases Miner Bone Metab       Date:  2009-05

5.  Calcium phosphate coating formed in infusion fluid mixture to enhance fixation strength of titanium screws.

Authors:  Hirotaka Mutsuzaki; Atsuo Ito; Masataka Sakane; Yu Sogo; Ayako Oyane; Yuko Ebihara; Noboru Ichinose; Naoyuki Ochiai
Journal:  J Mater Sci Mater Med       Date:  2007-05-05       Impact factor: 3.896

6.  Drug loading and release of Tobramycin from hydroxyapatite coated fixation pins.

Authors:  Mirjam Lilja; Jan Henrik Sörensen; Ulrika Brohede; Maria Astrand; Philip Procter; Jörg Arnoldi; Hartwig Steckel; Maria Strømme
Journal:  J Mater Sci Mater Med       Date:  2013-06-19       Impact factor: 3.896

7.  Management of distal third tibial fractures: comparison of combined internal and external fixation with minimally invasive percutaneous plate osteosynthesis.

Authors:  Liao-Jun Sun; Zhi-Peng Wu; Xiao-Shan Guo; Hua Chen
Journal:  Int Orthop       Date:  2014-08-03       Impact factor: 3.075

8.  Bone-bonding properties of Ti metal subjected to acid and heat treatments.

Authors:  Toshiyuki Kawai; Mitsuru Takemoto; Shunsuke Fujibayashi; Masashi Neo; Haruhiko Akiyama; Seiji Yamaguchi; Deepak K Pattanayak; Tomiharu Matsushita; Takashi Nakamura; Tadashi Kokubo
Journal:  J Mater Sci Mater Med       Date:  2012-09-05       Impact factor: 3.896

9.  Complete ejection of a ring sequestrum 8 years after external fixation of the tibia.

Authors:  Isabella Regina Timmer; Benjamin Lucas Emmink; Loek Petrus Hendrikus Leenen; Geertje Anna Maria Govaert
Journal:  BMJ Case Rep       Date:  2020-03-29

10.  Clinical and histomorphometrical study on titanium dioxide-coated external fixation pins.

Authors:  Hironobu Koseki; Tomohiko Asahara; Takayuki Shida; Itaru Yoda; Hidehiko Horiuchi; Koumei Baba; Makoto Osaki
Journal:  Int J Nanomedicine       Date:  2013-02-05
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.