Literature DB >> 9513100

In vitro wear of resin denture teeth.

S Hirano1, K B May, W C Wagner, C H Hacker.   

Abstract

STATEMENT OF PROBLEM: One of the most important physical properties of artificial teeth used in the restoration of the edentulous patient is wear resistance, and the ability of these teeth to maintain a stable occlusal relationship over time.
PURPOSE: This study compared the in vitro wear of four different resin denture teeth against human enamel.
MATERIAL AND METHODS: Five denture tooth samples opposing five enamel abraders were positioned in a mechanical wear testing device for two 5,000 cycle wear periods (total of 10,000 cycles) under a 13.4 N load. All tests were conducted in human saliva, and the wear was measured at the end of each test period.
RESULTS: The wear of the Classic and Kenson acrylic resin denture teeth was much greater than the DB Plus and MLI composite teeth after 10,000 cycles. The wear of the KENSON denture tooth was also greater than the Classic tooth. No wear differences were found between the two composite teeth.
CONCLUSIONS: The wear of DB Plus and MLI resin denture teeth was approximately 50% less than the wear of Classic and Kenson teeth when opposed by human enamel.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9513100     DOI: 10.1016/s0022-3913(98)70209-4

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  9 in total

1.  An in vitro analysis of wear resistance of commercially available acrylic denture teeth.

Authors:  Mallika S Shetty; K Kamalakanth Shenoy
Journal:  J Indian Prosthodont Soc       Date:  2010-12-08

2.  Factors affecting wear of composite resin denture teeth--24-month results from a clinical study.

Authors:  Thomas Stober; Andreas Geiger; Stefan Rues; Jens Dreyhaupt; Peter Rammelsberg; Brigitte Ohlmann
Journal:  Clin Oral Investig       Date:  2011-03-08       Impact factor: 3.573

3.  Surface properties of multilayered, acrylic resin artificial teeth after immersion in staining beverages.

Authors:  Karin Hermana Neppelenbroek; Eduardo Kuroishi; Juliana Hotta; Vinicius Rizzo Marques; Eduardo Buozi Moffa; Simone Soares; Vanessa Migliorini Urban
Journal:  J Appl Oral Sci       Date:  2015 Jul-Aug       Impact factor: 2.698

4.  In Vitro Investigation of Wear of CAD/CAM Polymeric Materials Against Primary Teeth.

Authors:  Jae-Won Choi; Eun-Ju Song; Jong-Hyun Shin; Tae-Sung Jeong; Jung-Bo Huh
Journal:  Materials (Basel)       Date:  2017-12-09       Impact factor: 3.623

5.  Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA.

Authors:  Ala Hassan A Qamheya; Sinem Yeniyol; Volkan Arısan
Journal:  Case Rep Dent       Date:  2015-10-18

6.  Abrasion wear resistance of different artificial teeth opposed to metal and composite antagonists.

Authors:  Pâmela Carbone Mello; Abílio Ricciardi Coppedê; Ana Paula Macedo; Maria da Gloria Chiarello de Mattos; Renata Cristina Silveira Rodrigues; Ricardo Faria Ribeiro
Journal:  J Appl Oral Sci       Date:  2009 Sep-Oct       Impact factor: 2.698

7.  Weight loss of five commercially available denture teeth after toothbrushing with three different dentifrices.

Authors:  Karina Matthes de Freitas; Helena de Freitas Oliveira Paranhos
Journal:  J Appl Oral Sci       Date:  2006-08       Impact factor: 2.698

8.  In vitro wear resistance of three types of polymethyl methacrylate denture teeth.

Authors:  Katia Rodrigues Reis; Gerson Bonfante; Luiz Fernando Pegoraro; Paulo Cesar Rodrigues Conti; Pedro Cesar Garcia de Oliveira; Osvaldo Bazzan Kaizer
Journal:  J Appl Oral Sci       Date:  2008 May-Jun       Impact factor: 2.698

9.  Different Occlusal Schemes in a Persistent Protruding Complete Denture Wearer.

Authors:  Carolina Mayumi Iegami; Danilo de Melo Lopes; Atlas Edson Moleros Nakamae; Priscila Nakasone Uehara; Regina Tamaki
Journal:  Case Rep Dent       Date:  2016-03-16
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.