Literature DB >> 9239561

The normal stress effect and equilibrium friction coefficient of articular cartilage under steady frictional shear.

H Wang1, G A Ateshian.   

Abstract

During creep or stress relaxation, articular cartilage exhibits a time-dependent friction coefficient which has been shown to reach an equilibrium value, mu eq, as the tissue deformation equilibrates. This study investigates the frictional properties of articular cartilage explants under steady frictional shear and constant compressive strain after the tissue reaches stress-relaxation equilibrium. The two parameters measured are the normal force and frictional torque, from which the friction coefficient was then calculated. It is shown in this experimental study that: (1) Under a prescribed infinitesimal compressive strain, cartilage supports higher compressive normal stress under steady shear than it does in the absence of frictional shear. Furthermore, the normal stress increases with increasing sliding velocity, resulting in a velocity-dependent value of mu eq. The observed normal stress effectively increases the compressive stiffness of cartilage by a factor up to 3.1. (2) Under a prescribed steady frictional shear both the normal stress and frictional shear stress increase, though not proportionally, with increasing compressive strain, producing a decreasing friction coefficient. (3) This velocity-dependent normal stress effect is also shown to result, at least partly, from intrinsic properties of cartilage. The normal stress effect has not been previously reported for articular cartilage, and represents an intriguing mechanical response not commonly encountered in solids, though common in non-Newtonian fluids.

Entities:  

Mesh:

Year:  1997        PMID: 9239561     DOI: 10.1016/s0021-9290(97)00031-6

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  11 in total

1.  Anatomically shaped tissue-engineered cartilage with tunable and inducible anticytokine delivery for biological joint resurfacing.

Authors:  Franklin T Moutos; Katherine A Glass; Sarah A Compton; Alison K Ross; Charles A Gersbach; Farshid Guilak; Bradley T Estes
Journal:  Proc Natl Acad Sci U S A       Date:  2016-07-18       Impact factor: 11.205

2.  Role of facet curvature for accurate vertebral facet load analysis.

Authors:  Gerhard A Holzapfel; Michael Stadler
Journal:  Eur Spine J       Date:  2005-05-24       Impact factor: 3.134

3.  Are you listening?

Authors:  Andrew Varadi
Journal:  J Can Chiropr Assoc       Date:  2005-09

4.  A Systematic Review and Guide to Mechanical Testing for Articular Cartilage Tissue Engineering.

Authors:  Jay M Patel; Brian C Wise; Edward D Bonnevie; Robert L Mauck
Journal:  Tissue Eng Part C Methods       Date:  2019-09-30       Impact factor: 3.056

5.  Multifunctional hybrid three-dimensionally woven scaffolds for cartilage tissue engineering.

Authors:  Franklin T Moutos; Bradley T Estes; Farshid Guilak
Journal:  Macromol Biosci       Date:  2010-11-10       Impact factor: 4.979

6.  Pulsed gradient stimulated echo (PGStE) NMR shows spatial dependence of fluid diffusion in human stage IV osteoarthritic cartilage.

Authors:  Sarah E Mailhiot; Sarah L Codd; Jennifer R Brown; Joseph D Seymour; Ronald K June
Journal:  Magn Reson Med       Date:  2018-02-02       Impact factor: 4.668

7.  Functional properties of cell-seeded three-dimensionally woven poly(epsilon-caprolactone) scaffolds for cartilage tissue engineering.

Authors:  Franklin T Moutos; Farshid Guilak
Journal:  Tissue Eng Part A       Date:  2010-04       Impact factor: 3.845

8.  Composite three-dimensional woven scaffolds with interpenetrating network hydrogels to create functional synthetic articular cartilage.

Authors:  I-Chien Liao; Franklin T Moutos; Bradley T Estes; Xuanhe Zhao; Farshid Guilak
Journal:  Adv Funct Mater       Date:  2013-12-17       Impact factor: 18.808

9.  Cationic agent contrast-enhanced computed tomography imaging of cartilage correlates with the compressive modulus and coefficient of friction.

Authors:  B A Lakin; D J Grasso; S S Shah; R C Stewart; P N Bansal; J D Freedman; M W Grinstaff; B D Snyder
Journal:  Osteoarthritis Cartilage       Date:  2012-10-04       Impact factor: 6.576

Review 10.  Shape, loading, and motion in the bioengineering design, fabrication, and testing of personalized synovial joints.

Authors:  Gregory M Williams; Elaine F Chan; Michele M Temple-Wong; Won C Bae; Koichi Masuda; William D Bugbee; Robert L Sah
Journal:  J Biomech       Date:  2009-10-07       Impact factor: 2.712

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.