Literature DB >> 9066214

A review of all-ceramic restorations.

M A Rosenblum1, A Schulman.   

Abstract

To select the most appropriate type of all-ceramic system for clinical use, the clinician must be familiar with the differences between systems. This article discusses five categories of all-ceramic restorative systems relative to their processing techniques, strength and wear characteristics. The authors present and compare results of published in vitro studies and short-term clinical studies.

Mesh:

Substances:

Year:  1997        PMID: 9066214     DOI: 10.14219/jada.archive.1997.0193

Source DB:  PubMed          Journal:  J Am Dent Assoc        ISSN: 0002-8177            Impact factor:   3.634


  20 in total

1.  Determination of quantitative leucite content in pressable ceramics compared to conventional dental porcelains.

Authors:  S Assmann; M Ermrich; K Kunzmann
Journal:  J Mater Sci Mater Med       Date:  2000-12       Impact factor: 3.896

2.  Clinical evaluation of ceramic inlays and onlays fabricated with two systems: 12-year follow-up.

Authors:  Maria Jacinta Moraes Coelho Santos; Maria Cristina Freitas; Larissa Marinho Azevedo; Gildo Coelho Santos; Maria Fidela Navarro; Carlos Eduardo Francischone; Rafael Francisco Mondelli
Journal:  Clin Oral Investig       Date:  2015-12-12       Impact factor: 3.573

3.  Effects of sintering temperature and particle size on the translucency of zirconium dioxide dental ceramic.

Authors:  Li Jiang; Yunmao Liao; Qianbing Wan; Wei Li
Journal:  J Mater Sci Mater Med       Date:  2011-09-16       Impact factor: 3.896

4.  Dental Wings CAD/CAM system precision: an internal and marginal fit sperimental analisys.

Authors:  G Sannino; F Gloria; R Schiavetti; L Ottria; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2010-04-20

5.  Stress distribution on a three-unit implant-supported zirconia framework. A 3D finite element analysis and fatigue test.

Authors:  G Sannino; A Pozzi; R Schiavetti; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2012-07-17

6.  Detection of artificial demineralization bordering different types of laminate veneers using visual inspection and storage phosphor radiography.

Authors:  Erhan Cömlekoğlu; Erinç Önem; Mine Dündar Çömlekoğlu; B Güniz Baksı; Ali Mert
Journal:  Clin Oral Investig       Date:  2012-09-28       Impact factor: 3.573

7.  Evaluation of fracture strength for single crowns made of the different types of lithium disilicate glass-ceramics.

Authors:  Chung-Ha Lim; Yong-Seok Jang; Min-Ho Lee; Tae-Sung Bae
Journal:  Odontology       Date:  2019-09-28       Impact factor: 2.634

8.  Analysis of Translucency Parameter of Glass-Ceramics Fabricated by Different Techniques.

Authors:  Karla Ledić; Igor Majnarić; Slađana Milardović; Stipe Špalj; Sanja Štefančić; Ketij Mehulić
Journal:  Acta Stomatol Croat       Date:  2015-03

9.  Study on machinable glass-ceramic containing fluorophlogopite for dental CAD/CAM system.

Authors:  Hong Li; De-Qiang You; Chang-Ren Zhou; Jun-Guo Ran
Journal:  J Mater Sci Mater Med       Date:  2006-11-22       Impact factor: 3.896

10.  Evaluation of fracture resistance and mode of failure of premolars restored with nanohybrid composite, ORMOCER and ceramic inlays.

Authors:  Mohit K Gunwal; Pratima R Shenoi; Tanvee Paranjape; Sonal Dhote; Ravish Tongya; Magesh Kumar; Sanjay Rastogi
Journal:  J Oral Biol Craniofac Res       Date:  2017-09-01
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.