Literature DB >> 8600256

A comparison of three-dimensional computed tomography scans and stereolithographic models for evaluation of craniofacial anomalies.

J Kragskov1, S Sindet-Pedersen, C Gyldensted, K L Jensen.   

Abstract

PURPOSE: This article describes the use of stereolithographic (SL) models as an adjunct to treatment planning in patients with Apert's syndrome, scaphocephaly, brachycephaly, and turricephaly. PATIENTS AND METHODS: Four syndrome patients had computed tomography (CT) scans done presurgically, and one of these patients was additionally scanned postoperatively. SL models and three-dimensional (3D) CT image reconstructions were produced from the CT data, and linear measurements were compared between the two modalities.
RESULTS: All cases showed mean differences between measurements with 3D-CT and SL models of -0.3 to 0.8 mm, except on the CT scans with a gantry tilt (-1.7 mm) and the brachycephalic patient in whom larger deviations were demonstrated (-9.5 mm).
CONCLUSION: The results of the study indicate that the accuracy of the SL technique is not always sufficient, necessitating additional validation studies before it can be recommended for routine clinical use.

Entities:  

Mesh:

Year:  1996        PMID: 8600256     DOI: 10.1016/s0278-2391(96)90109-3

Source DB:  PubMed          Journal:  J Oral Maxillofac Surg        ISSN: 0278-2391            Impact factor:   1.895


  12 in total

1.  [CT assisted mandibular osteodistraction with reconstruction of the temporomandibular joint and two piece maxilla].

Authors:  W Kater; R Seeberger; R Davids; D Schäfer
Journal:  Mund Kiefer Gesichtschir       Date:  2006-01

2.  Comparison of Scientific Calipers and Computer-Enabled CT Review for the Measurement of Skull Base and Craniomaxillofacial Dimensions.

Authors:  M J Citardi; B Herrmann; C S Hollenbeak; B C Stack; M Cooper; R D Bucholz
Journal:  Skull Base       Date:  2001-02

3.  Application of two segmentation protocols during the processing of virtual images in rapid prototyping: ex vivo study with human dry mandibles.

Authors:  Eduardo Gomes Ferraz; Lucio Costa Safira Andrade; Aline Rode dos Santos; Vinicius Rabelo Torregrossa; Izabel Regina Fischer Rubira-Bullen; Viviane Almeida Sarmento
Journal:  Clin Oral Investig       Date:  2013-01-24       Impact factor: 3.573

4.  Development of a simulation system in mandibular orthognathic surgery based on integrated three-dimensional data.

Authors:  Yoshihide Mori; Hidetaka Shimizu; Katsuhiro Minami; Tae-Geon Kwon; Takamitsu Mano
Journal:  Oral Maxillofac Surg       Date:  2010-10-28

5.  Late treatment of orbital fractures: a new analysis for surgical planning.

Authors:  M Pagnoni; M Marenco; V Ramieri; V Terenzi; D Bartoli; G Amodeo; A Mazzoli; G Iannetti
Journal:  Acta Otorhinolaryngol Ital       Date:  2014-12       Impact factor: 2.124

6.  [Rapid prototyping in planning reconstructive surgery of the head and neck. Review and evaluation of indications in clinical use].

Authors:  J S Bill; J F Reuther
Journal:  Mund Kiefer Gesichtschir       Date:  2004-03-16

7.  Measurement accuracy of a computer-assisted three-dimensional analysis and a conventional two-dimensional method.

Authors:  Huseyin Olmez; Serkan Gorgulu; Erol Akin; Ali Osman Bengi; Ibrahim Tekdemir; Fatih Ors
Journal:  Angle Orthod       Date:  2011-01-24       Impact factor: 2.079

8.  Imaging Factors Impacting on Accuracy and Radiation Dose in 3D Printing.

Authors:  Jorge Javier de Lima Moreno; Gabriela Salatino Liedke; Roberto Soler; Heloisa Emília Dias da Silveira; Heraldo Luis Dias da Silveira
Journal:  J Maxillofac Oral Surg       Date:  2018-02-28

9.  Development of 3D statistical mandible models for cephalometric measurements.

Authors:  Sung-Goo Kim; Won-Jin Yi; Soon-Jung Hwang; Soon-Chul Choi; Sam-Sun Lee; Min-Suk Heo; Kyung-Hoe Huh; Tae-Il Kim; Helen Hong; Ji Hyun Yoo
Journal:  Imaging Sci Dent       Date:  2012-09-21

10.  Accuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique.

Authors:  Jae-Hong Kim; Ki-Baek Kim; Woong-Chul Kim; Ji-Hwan Kim; Hae-Young Kim
Journal:  Korean J Orthod       Date:  2014-03-19       Impact factor: 1.372

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.