Literature DB >> 8411465

Hemodynamic evaluation of a bioprosthetic venous prosthesis.

G A DeLaria1, T Phifer, J Roy, R Tu, K Thyagarajan, R C Quijano.   

Abstract

PURPOSE: A prosthetic venous valve must be biocompatible and nonthrombogenic and function in the venous circulation. Biocompatibility and thrombogenicity of our prosthesis have been examined in prior animal experiments, and 91% of valve conduits including early prototypes are patent at 3 weeks. However, evaluation of valve function is much more difficult in animals; therefore in this study the function of excised valves was evaluated ex vivo.
METHODS: Nine bovine jugular vein conduits, each with one bileaflet venous valve, were harvested and placed in a venous flow simulator. Flows and pressures were adjusted to mimic human respiratory and hydrostatic variations. Each valve and conduit was tested for variations in valve diameter and sinus expansion in response to flow. Valve opening and closing times and valve competence were measured in response to pressure changes. After testing, each specimen was glutaraldehyde fixed and assessed a second time.
RESULTS: Valve orifice area increased in response to flow in both fresh and fixed tissues. Maximum valve orifice area was reduced by fixation (27.7%) at full flows (p < 0.05). Valve sinus dimensions increased in response to increased pressure until maximum expansion was achieved (33 mm Hg). This was reduced 15.3% in fixed tissue (p < 0.05). Valve opening times (at < 1 mm Hg gradient) were slightly longer in fixed compared with fresh tissue (0.43 +/- 0.09 vs 0.41 +/- 0.13 second; p < 0.05). Valve closing times were comparable in both states (0.43 +/- 0.08 vs 0.49 +/- 0.07 second). Three fresh and seven fixed specimens that were subjected to 287 mm Hg back pressure exhibited minimal reflux.
CONCLUSIONS: Size and availability make the bovine jugular vein valve an ideal venous valve substitute. Glutaraldehyde fixation renders the tissue biocompatible and nonthrombogenic while preserving anatomic integrity and leaflet strength and flexibility. Mounted and stented in a sewing sleeve, this prosthesis could represent the first generally applicable clinical solution to chronic venous insufficiency and venous hypertension.

Entities:  

Mesh:

Year:  1993        PMID: 8411465     DOI: 10.1067/mva.1993.49081

Source DB:  PubMed          Journal:  J Vasc Surg        ISSN: 0741-5214            Impact factor:   4.268


  5 in total

1.  Implantation of cryopreserved allograft pulmonary monocusp patch to treat nonthrombotic femoral vein incompetence.

Authors:  Raúl García-Rinaldi; Ernesto Soltero; Jorge Gaviria; Javier Sosa; Paul Tucker
Journal:  Tex Heart Inst J       Date:  2002

2.  Microstructure and Mechanical Property of Glutaraldehyde-Treated Porcine Pulmonary Ligament.

Authors:  Huan Chen; Xuefeng Zhao; Zachary C Berwick; Joshua F Krieger; Sean Chambers; Ghassan S Kassab
Journal:  J Biomech Eng       Date:  2016-06       Impact factor: 2.097

3.  The design, development, and evaluation of a prototypic, prosthetic venous valve.

Authors:  Matt T Oberdier; Stanley E Rittgers
Journal:  Biomed Eng Online       Date:  2008-09-19       Impact factor: 2.819

4.  Effect of valve lesion on venous valve cycle: A modified immersed finite element modeling.

Authors:  Xiang Liu; Lisheng Liu
Journal:  PLoS One       Date:  2019-03-04       Impact factor: 3.240

5.  Physiologically-based testing system for the mechanical characterization of prosthetic vein valves.

Authors:  Stanley E Rittgers; Matt T Oberdier; Sharath Pottala
Journal:  Biomed Eng Online       Date:  2007-07-13       Impact factor: 2.819

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.