Literature DB >> 7990040

Thermal distortion of different materials in crown construction.

D Castellani1, T Baccetti, C Clauser, U D Bernardini.   

Abstract

This study compared the thermal distortion of all-ceramic crowns with porcelain-fused-to-metal crowns. The materials exhibited different responses: metal ceramic crowns stabilized after an initial loss of marginal precision, and the all-ceramic crowns continued to distort with each firing cycle.

Entities:  

Mesh：

Substances：

Year:  1994        PMID： 7990040     DOI： 10.1016/0022-3913(94)90554-1

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  10 in total

1.  The effect of veneering on the marginal fit of CAD/CAM-generated, copy-milled, and cast metal copings.

Authors:  Sabit Melih Ates; Zeynep Yesil Duymus; Ipek Caglar; Bilal Hologlu
Journal:  Clin Oral Investig       Date:  2017-01-13       Impact factor: 3.573

2.  A comparative study of the effect of four consecutive firing cycles on the marginal fit of all: ceramic crown system and metal ceramic crown system.

Authors:  Ganesh B Bajaj
Journal:  J Indian Prosthodont Soc       Date:  2012-09-28

3.  Influence of porcelain veneering on the marginal fit of Digident and Lava CAD/CAM zirconia ceramic crowns.

Authors:  Hyun-Soon Pak; Jung-Suk Han; Jai-Bong Lee; Sung-Hun Kim; Jae-Ho Yang
Journal:  J Adv Prosthodont       Date:  2010-06-30       Impact factor: 1.904

4.  The Effect of Mechanical and Chemical Surface Preparation Methods on the Bond Strength in Repairing the Surface of Metal-Ceramic Crowns with Composite Resin: a Systematic Review and Meta-Analysis.

Authors:  Farzaneh Shirani; Azadeh Kianipour; Mahdi Rahbar
Journal:  Maedica (Bucur)       Date:  2020-06

5.  The effect of porcelain firing and type of finish line on the marginal fit of zirconia copings.

Authors:  Mahroo Vojdani; Anahita Safari; Mina Mohaghegh; Soheil Pardis; Farideh Mahdavi
Journal:  J Dent (Shiraz)       Date:  2015-06

6.  The effect of various veneering techniques on the marginal fit of zirconia copings.

Authors:  Kianoosh Torabi; Mahroo Vojdani; Rashin Giti; Masumeh Taghva; Soheil Pardis
Journal:  J Adv Prosthodont       Date:  2015-06-23       Impact factor: 1.904

7.  Comparison of the fit accuracy of zirconia-based prostheses generated by two CAD/CAM systems.

Authors:  Seok-Joon Ha; Jin-Hyun Cho
Journal:  J Adv Prosthodont       Date:  2016-12-15       Impact factor: 1.904

8.  Marginal Fit of Full Contour Monolithic Zirconia in Different Thicknesses and Layered Zirconia Crowns.

Authors:  Mina Mohaghegh; Maryam Firouzmandi; Elham Ansarifard; Laleh Ramazani
Journal:  J Int Soc Prev Community Dent       Date:  2020-09-28

9.  In vitro evaluation of the effect of core thickness and fabrication stages on the marginal accuracy of an all-ceramic system.

Authors:  F Farid; H Hajimiragha; R Jelodar; A S Mostafavi; H Nokhbatolfoghahaie
Journal:  J Dent (Tehran)       Date:  2012-09-30

10.  Clinical gap changes after porcelain firing cycles of zirconia fixed dentures.

Authors:  Bugurman Burcu Bugurman; Sebnem Begum Turker
Journal:  J Adv Prosthodont       Date:  2014-06-24       Impact factor: 1.904
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.