Literature DB >> 7542245

Effect of titanium surface roughness on proliferation, differentiation, and protein synthesis of human osteoblast-like cells (MG63).

J Y Martin1, Z Schwartz, T W Hummert, D M Schraub, J Simpson, J Lankford, D D Dean, D L Cochran, B D Boyan.   

Abstract

The effect of surface roughness on osteoblast proliferation, differentiation, and protein synthesis was examined. Human osteoblast-like cells (MG63) were cultured on titanium (Ti) disks that had been prepared by one of five different treatment regimens. All disks were pretreated with hydrofluroic acid-nitric acid and washed (PT). PT disks were also: washed, and then electropolished (EP); fine sandblasted, etched with HCl and H2SO4, and washed (FA); coarse sandblasted, etched with HCl and H2SO4, and washed (CA); or Ti plasma-sprayed (TPS). Standard tissue culture plastic was used as a control. Surface topography and profile were evaluated by brightfield and darkfield microscopy, cold field emission scanning electron microscopy, and laser confocal microscopy, while chemical composition was mapped using energy dispersion X-ray analysis and elemental distribution determined using Auger electron spectroscopy. The effect of surface roughness on the cells was evaluated by measuring cell number, [3H]thymidine incorporation into DNA, alkaline phosphatase specific activity, [3H]uridine incorporation into RNA, [3H]proline incorporation into collagenase digestible protein (CDP) and noncollagenase-digestible protein (NCP), and [35S]sulfate incorporation into proteoglycan. Based on surface analysis, the five different Ti surfaces were ranked in order of smoothest to roughest: EP, PT, FA, CA, and TPS. A TiO2 layer was found on all surfaces that ranged in thickness from 100 A in the smoothest group to 300 A in the roughest. When compared to confluent cultures of cells on plastic, the number of cells was reduced on the TPS surfaces and increased on the EP surfaces, while the number of cells on the other surfaces was equivalent to plastic. [3H]Thymidine incorporation was inversely related to surface roughness. Alkaline phosphatase specific activity in isolated cells was found to decrease with increasing surface roughness, except for those cells cultured on CA. In contrast, enzyme activity in the cell layer was only decreased in cultures grown on FA- and TPS-treated surfaces. A direct correlation between surface roughness and RNA and CDP production was found. Surface roughness had no apparent effect on NCP production. Proteoglycan synthesis by the cells was inhibited on all the surfaces studied, with the largest inhibition observed in the CA and EP groups. These results demonstrate that surface roughness alters osteoblast proliferation, differentiation, and matrix production in vitro. The results also suggest that implant surface roughness may play a role in determining phenotypic expression of cells in vivo.

Entities:  

Mesh:

Substances:

Year:  1995        PMID: 7542245     DOI: 10.1002/jbm.820290314

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  153 in total

1.  Effects of structural properties of electrospun TiO2 nanofiber meshes on their osteogenic potential.

Authors:  Xiaokun Wang; Rolando A Gittens; Rosemary Song; Rina Tannenbaum; Rene Olivares-Navarrete; Zvi Schwartz; Haifeng Chen; Barbara D Boyan
Journal:  Acta Biomater       Date:  2011-10-31       Impact factor: 8.947

2.  In vitro response of primary rat osteoblasts to titania/hydroxyapatite coatings compared with transformed human osteoblast-like cells.

Authors:  P A Ramires; F Cosentino; E Milella; P Torricelli; G Giavaresi; R Giardino
Journal:  J Mater Sci Mater Med       Date:  2002-08       Impact factor: 3.896

3.  Human osteoblast adhesion on titanium alloy, stainless steel, glass and plastic substrates with same surface topography.

Authors:  K Anselme; B Noël; P Hardouin
Journal:  J Mater Sci Mater Med       Date:  1999-12       Impact factor: 3.896

4.  Biological behavior of sol-gel coated dental implants.

Authors:  P A Ramires; A Wennerberg; C B Johansson; F Cosentino; S Tundo; E Milella
Journal:  J Mater Sci Mater Med       Date:  2003-06       Impact factor: 3.896

Review 5.  Surface treatments and roughness properties of Ti-based biomaterials.

Authors:  Andrea Bagno; Carlo Di Bello
Journal:  J Mater Sci Mater Med       Date:  2004-09       Impact factor: 3.896

6.  Preparation of superhydrophilic microrough titanium implant surfaces by alkali treatment.

Authors:  Stefano Tugulu; Konrad Löwe; Dieter Scharnweber; Falko Schlottig
Journal:  J Mater Sci Mater Med       Date:  2010-08-20       Impact factor: 3.896

7.  Degradable segmented polyurethane elastomers for bone tissue engineering: effect of polycaprolactone content.

Authors:  Katherine D Kavlock; Kyumin Whang; Scott A Guelcher; Aaron S Goldstein
Journal:  J Biomater Sci Polym Ed       Date:  2012-05-11       Impact factor: 3.517

8.  [Osteoblast reaction on SLA and microgrooved implant surfaces].

Authors:  T Fillies; H P Wiesmann; D Sommer; U Joos; U Meyer
Journal:  Mund Kiefer Gesichtschir       Date:  2005-01

9.  New chemical treatment for bioactive titanium alloy with high corrosion resistance.

Authors:  S Spriano; M Bronzoni; F Rosalbino; E Vernè
Journal:  J Mater Sci Mater Med       Date:  2005-03       Impact factor: 3.896

10.  Titanium foam-bioactive nanofiber hybrids for bone regeneration.

Authors:  Timothy D Sargeant; Scott M Oppenheimer; David C Dunand; Samuel I Stupp
Journal:  J Tissue Eng Regen Med       Date:  2008-12       Impact factor: 3.963

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.