Frozen storage increases the ultimate compressive load of porcine vertebrae.

The use of freezing as a method of storage is commonplace in mechanical testing of biological tissues. The effects of freezing on tissues that comprise spinal segments have been examined separately, but little work has been done on intact specimens. We examined the effect of freezing on the structural properties of porcine cervical spines. The intact cervical spines of seven pigs (a total of 14 specimens--seven of C2-C4 and seven of C5-C7) were stored frozen (-20 degrees C) for 1 month. The ultimate compressive load, displacement, stiffness, and energy absorbed were obtained using a monotonic compressive load applied at 3,000 N/sec. The structural properties were compared with those of another 14 porcine cervical specimens (control group, matched for age and weight) that were tested in a fresh state. The frozen storage of the vertebral specimens significantly increased the ultimate compressive load (24%) and energy absorbed to failure (33%). The stiffness and displacement at failure were not affected. We concluded that the use of freezing as a storage medium should be of concern when the resulting measures are used to quantify the ultimate compressive load of the spinal motion segments.