Literature DB >> 7012317

The effect of repeated firings and strength on marginal distortion in two ceramometal systems.

W T Buchanan, C W Svare, K A Turner.   

Abstract

1. Segments of the margin with porcelain adjacent to them did not change more than those without porcelain. 2. The marginal opening in the specimen made from the higher strength metal increased more than those made from the lower strength metal.

Entities:  

Mesh：

Substances：

Year:  1981        PMID： 7012317     DOI： 10.1016/0022-3913(81)90035-4

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  6 in total

1.  The effect of veneering on the marginal fit of CAD/CAM-generated, copy-milled, and cast metal copings.

Authors:  Sabit Melih Ates; Zeynep Yesil Duymus; Ipek Caglar; Bilal Hologlu
Journal:  Clin Oral Investig       Date:  2017-01-13       Impact factor: 3.573

2.  A comparative study of the effect of four consecutive firing cycles on the marginal fit of all: ceramic crown system and metal ceramic crown system.

Authors:  Ganesh B Bajaj
Journal:  J Indian Prosthodont Soc       Date:  2012-09-28

3.  A comparison of marginal fit of glass infiltrated alumina copings fabricated using two different techniques and the effect of firing cycles over them.

Authors:  Hirasankar Bhowmik; Rambhao Parkhedkar
Journal:  J Adv Prosthodont       Date:  2011-12-28       Impact factor: 1.904

4.  Comparison of Overall Fit of Milled and Laser-Sintered CAD/CAM Crown Copings.

Authors:  Lucie Zuskova; Noor A Al Mortadi; Robert J Williams; Karem H Alzoubi; Omar F Khabour
Journal:  Int J Dent       Date:  2019-07-07

5.  Marginal Adaptation of Implant Prostheses Fabricated by Different Materials in Excessive Crown Height Space before and after Veneering.

Authors:  Safoura Ghodsi; Marzieh Alikhasi; Majid Sahebi; Vahideh Nazari
Journal:  Front Dent       Date:  2021-07-25

6.  Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques.

Authors:  Ki-Baek Kim; Jae-Hong Kim; Woong-Chul Kim; Hae-Young Kim; Ji-Hwan Kim
Journal:  J Adv Prosthodont       Date:  2013-05-30       Impact factor: 1.904
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.