Literature DB >> 7009667

Comparative evaluation of ceramic-metal bond tests using finite element stress analysis.

K J Anusavice, P H Dehoff, C W Fairhurst.   

Abstract

Eleven porcelain-fused-to-metal bond tests were analyzed for interfacial shear stress distribution using finite-element stress analysis. Stress concentration effects are significant in ten of the 11 tests. A high probability of tensile failure within porcelain or the interfacial region was found in eight of the 11 tests analyzed.

Entities:  

Mesh：

Substances：

Year:  1980        PMID： 7009667     DOI： 10.1177/00220345800590030901

Source DB:  PubMed          Journal:  J Dent Res        ISSN： 0022-0345            Impact factor:   6.116


  10 in total

1.  Apparent interfacial fracture toughness of resin/ceramic systems.

Authors:  A Della Bona; K J Anusavice; J J Mecholsky
Journal:  J Dent Res       Date:  2006-11       Impact factor: 6.116

2.  Nano-crystallization and surface analysis of electrolytic ZrO2 coatings on Co-Cr alloy.

Authors:  S K Yen; H C Hsu
Journal:  J Mater Sci Mater Med       Date:  2001-06       Impact factor: 3.896

3.  A comparative study on the bond strength of porcelain to the millingable Pd-Ag alloy.

Authors:  Jun-Tae Hong; Soo-Yeon Shin
Journal:  J Adv Prosthodont       Date:  2014-10-21       Impact factor: 1.904

4.  The Bond Strength of Nanohybrid and Nanoceramic Composites to Feldspathic Porcelain.

Authors:  Hatice Özdemir; Nuran Dinçkal Yanikoglu
Journal:  Contemp Clin Dent       Date:  2017 Oct-Dec

5.  Evaluation and comparison of shear bond strength of porcelain to a beryllium-free alloy of nickel-chromium, nickel and beryllium free alloy of cobalt-chromium, and titanium: An in vitro study.

Authors:  Ananya Singh; Keerthi Ramachandra; Achut R Devarhubli
Journal:  J Indian Prosthodont Soc       Date:  2017 Jul-Sep

6.  Airborne-particle abrasion; searching the right parameter.

Authors:  Mehmet Emre Coskun; Turker Akar; Faik Tugut
Journal:  J Dent Sci       Date:  2018-03-30       Impact factor: 2.080

7.  Correlation between metal-ceramic bond strength and coefficient of linear thermal expansion difference.

Authors:  Stella Crosara Lopes; Valéria Oliveira Pagnano; João Manuel Domingos de Almeida Rollo; Mônica Barbosa Leal; Osvaldo Luiz Bezzon
Journal:  J Appl Oral Sci       Date:  2009 Mar-Apr       Impact factor: 2.698

8.  Effect of screw access hole preparation on fracture load of implant-supported zirconia-based crowns: an in vitro study.

Authors:  Hadi Mokhtarpour; Reza Eftekhar Ashtiani; Minoo Mahshid; Farhad Tabatabaian; Marzieh Alikhasi
Journal:  J Dent Res Dent Clin Dent Prospects       Date:  2016-08-17

9.  Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength.

Authors:  Carla Müller Ramos-Tonello; Bruno Freitas Trevizo; Raphaela Farias Rodrigues; Ana Paula Rodrigues Magalhães; Adilson Yoshio Furuse; Paulo Noronha Lisboa-Filho; Americo Sheitiro Tabata; Ana Flávia Sanches Borges
Journal:  J Appl Oral Sci       Date:  2017 Nov-Dec       Impact factor: 2.698

10.  The Application of a Novel Ceramic Liner Improves Bonding between Zirconia and Veneering Porcelain.

Authors:  Hee-Sung Lee; Tae-Yub Kwon
Journal:  Materials (Basel)       Date:  2017-09-02       Impact factor: 3.623
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.