Literature DB >> 5251347

Fatigue failure in denture base polymers.

E Kelly.   

Abstract

Entities:  

Mesh：

Substances：

Year:  1969        PMID： 5251347     DOI： 10.1016/0022-3913(69)90289-3

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


× No keyword cloud information.
  14 in total

1.  Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins.

Authors:  Nour M Ajaj-Alkordy; Mohannad H Alsaadi
Journal:  Saudi Dent J       Date:  2013-12-19

2.  Fatigue testing of biomaterials and their interfaces.

Authors:  Dwayne Arola
Journal:  Dent Mater       Date:  2017-02-20       Impact factor: 5.304

3.  An in-vitro evaluation of the flexural strength of heat-polymerized poly (methyl methacrylate) denture resin reinforced with fibers.

Authors:  Komal Ladha; Dipti Shah
Journal:  J Indian Prosthodont Soc       Date:  2011-07-14

4.  Analysis of bond strength between a nylon reinforcement structure and dental resins.

Authors:  Leonardo-Jiro-Nomura Nakano; Guilherme-da Rocha-Scalzer Lopes; Aline-Silva Firmino; Jefferson-David-Melo de Matos; Rubens-Nisie Tango; Tarcisio-José-de Arruda Paes-Junior
Journal:  J Clin Exp Dent       Date:  2021-05-01

5.  In-vitro Evaluation of Transverse Strength of Repaired Heat Cured Denture Base Resins without Surface Treatment and with Chemical and Mechanical Surface Treatment.

Authors:  Naveen S Yadav; Shilpi Khare; Sunil Kumar Mishra; Rajesh Vyas; Harsh Mahajan; Rajkiran Chitumalla
Journal:  J Int Oral Health       Date:  2015-08

6.  The effect of joint surface contours and glass fiber reinforcement on the transverse strength of repaired acrylic resin: An in vitro study.

Authors:  Nayana Anasane; Yogesh Ahirrao; Deepa Chitnis; Suresh Meshram
Journal:  Dent Res J (Isfahan)       Date:  2013-03

7.  The impact of frenulum height on strains in maxillary denture bases.

Authors:  Altug Cilingir; Hakan Bilhan; Gokhan Baysal; Emin Sunbuloglu; Ergun Bozdag
Journal:  J Adv Prosthodont       Date:  2013-11-28       Impact factor: 1.904

8.  Effect of Water Storage on the Flexural Strength of Heat-cured Denture Base Resin Reinforced with Stick (s) Glass Fibers.

Authors:  Ankit Galav; Suryakant C Deogade; Sneha Mantri; K Sumathi; Sneha Galav
Journal:  Contemp Clin Dent       Date:  2017 Apr-Jun

9.  The Influence of Thermocycling on the Flexural Strength of a Polyamide Denture Base Material.

Authors:  Nick Polychronakis; Aspasia Sarafianou; Alcibiadis Zissis; Triantafillos Papadopoulos
Journal:  Acta Stomatol Croat       Date:  2017-12

10.  Comparison of the flexural strength of polymethyl methacrylate resin reinforced with multiwalled carbon nanotubes and processed by conventional water bath technique and microwave polymerization.

Authors:  Surabhi Somkuwar; Sunil Kumar Mishra; Benaiffer Agrawal; Rupali Choure
Journal:  J Indian Prosthodont Soc       Date:  2017 Oct-Dec
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.