Advantages and prospects of optical coherence tomography in interventional therapy of coronary heart disease (Review).

Coronary heart disease is the leading cause of mortality among all diseases globally. Percutaneous coronary intervention (PCI) is a key method for the treatment of coronary heart disease. Optical coherence tomography (OCT) is an optical diagnostic technology with a resolution of up to 10 µm, which is able to accurately assess the composition of the coronary arterial wall and determine the characteristics of atherosclerotic lesions. It is also highly consistent with pathological examinations, optimizing the effect of stent implantation and evaluation of the long-term effectiveness and safety of the stent, which has irreplaceable value in the field of precision and optimization of coronary intervention. The innovative OCT technology may help provide more comprehensive clinical research evidence. The application of OCT in clinical and basic research of coronary atherosclerosis, selection of treatment strategies for acute coronary syndromes, optimization of interventional treatment efficacy, evaluation of novel stents, intimal stent coverage and selection of dual antiplatelet drugs has become more widely used, affecting the current coronary interventional treatment strategies to a certain extent. The aim of the present review was to discuss the role of OCT in evaluating preoperative plaque characteristics, guiding PCI and evaluating the effects of postoperative stents or drug treatments. Copyright: © Wang et al.

1. Introduction

In heart disease, medical imaging may provide an objective basis for the diagnosis and suitable treatment of changes in cardiac structure and minor pathological changes. The imaging examination techniques of the coronary arterial lumen mainly include coronary angiography (CAG), intravascular ultrasound (IVUS), optical coherence tomography (OCT), angioscopy and near-infrared spectroscopy (NIRS), which are able to clearly display the internal structure and pathological changes of blood vessels (1). These provide clinicians with real-time dynamic observations, help reach the correct diagnosis of the disease in a timely manner and provide reasonable treatment strategies (Table I).

Table I

Comparison of several catheter technologies.

Item	CAG	OCT	IVUS	Angioscopy	NIRS
Plaque volume	-	-	++	+	-
Calcification	++	++	+++	-	-
Fiber cap	-	+++	+	+	+
Lipid core	-	+++	++	+	++
Inflammation	-	+	-	-	-
Thrombus	+	++	+	+++	+
Vascular remodeling	-	-	++	-	-
Stent expansion	-	++	++	+	-
Intimal hyperplasia	+	++	+	+	-

OCT, optical coherence tomography; CAG, coronary angiography; IVUS, intravascular ultrasound; NIRS, near-infrared spectroscopy; -, no recognition ability; +, weak recognition; ++, fair recognition ability; +++, strong recognition.

CAG is a routine method used to assess the extent and severity of coronary artery disease. Intracoronary imaging methods, such as IVUS and OCT, may provide helpful information on the morphology of the coronary arteries and may help evaluate the size of the lumen, plaque load and composition in detail, which are helpful for treatment planning (1). As presented in Table II, accumulating evidence suggests that both IVUS and OCT are able to optimize the deployment and outcome of the stent while improving patient prognosis, particularly regarding the prognostic significance of the disease (the left main disease) and anatomical structures that are difficult to assess on imaging (2,3).

Table II

Comparison of the characteristics of OCT and IVUS.

A, IVUS modality
Advantages	Limitations
The development of IVUS and the recognition of images are relatively mature	The currently developed IVUS imaging catheter has poor passing ability for more severe stenosis or twisted angular lesions
IVUS is able to clearly display the intravascular structure and evaluate the plaque composition	As different tissues may have the same acoustic properties, the same density value may be reflected in IVUS images
It may optimize and guide the treatment of coronary intervention	The current IVUS on the market has a low resolution and is not able to make accurate judgments for small structures and lesions in blood vessels, and corresponding changes in the lumen after stent implantation
It may be used to study the mechanism of plaque progression or regression prior to and after treatment, vascular remodeling and restenosis after stent implantation
B, OCT modality
Advantages	Limitations
It has an ultra-high resolution comparable to histology, allowing real-time observation of small structures and lesions in blood vessels	The OCT imaging process requires blocking or removal of the blood in the corresponding detection vessel, which increases the difficulty of the operation and limits its application in severe coronary ischemic diseases
It is able to accurately measure coronary luminal parameters, observe the morphological characteristics of arterial intima and plaques, and identify vulnerable plaques and macrophage infiltration prior to surgery	OCT has a weak penetrating ability and is not able to accurately analyze the whole picture of the lesion. It is also difficult to measure the diameter of larger blood vessels and evaluate vascular remodeling
It is able to make the percutaneous coronary intervention process more refined and optimize the immediate effect after stent implantation. It may accurately observe the postoperative situation of various types of stent implantation at the cross-sectional level	OCT is not able to clearly identify the internal tissue covered by the thrombus (particularly red thrombus) inside the blood vessel
	In the detection after stent implantation, although OCT may clearly detect the stent intima, it is still unable to distinguish the histological characteristics of the stent surface covering the intima

OCT, optical coherence tomography; IVUS, intravascular ultrasound.

2. OCT evaluation of atherosclerotic plaque-related factors

Atherosclerotic plaque is a term used to describe a space-occupying lesion (thickening lesion) or loss of a three-layer structure in the blood vessel wall on OCT images. The OCT diagnostic criteria stated below refer to the internationally recognized OCT consensus (4-6).

Types of plaques on OCT images

In the OCT image, the normal coronary artery wall is characterized by a typical three-layer structure (Fig. 1A), which is composed of blood intima, media and adventitia (Fig. 1B). The intima of the blood vessel has a high reflection signal, the reflection signal of the media is usually low or weak and the adventitia frequently exhibits an uneven high-reflection signal. In OCT, the internal elastic membrane (IEM) is defined as the boundary between arterial intima and media, while the external elastic membrane (EEM) is defined as the boundary between arterial media and adventitia (Fig. 1B). Compared with traditional coronary angiography, OCT has marked high-resolution characteristics. OCT is able to accurately identify certain atherosclerotic plaques, adventitia, EEM and IEM, and may accurately identify different tissue characteristics of plaques, including fibers (Fig. 1C), calcification components (Fig. 1D) and lipids (Fig. 1E). At the same time, the evaluation of the microstructure in the plaque by OCT is unmatched by other imaging techniques, including cholesterol crystals (Fig. 1F), macrophages (Fig. 1G), microvessels (Fig. 1H) and microcalcifications. These types of plaques have differences in scattering characteristics (intensity of the reflected signal) and attenuation characteristics (as the signal penetrates deeper into the tissue layer, the intensity of the light signal gradually decreases through scattering and absorption). Therefore, these plaques with different properties will have corresponding characteristic changes on the OCT image. As is presented in Fig. 1 and Table III, the plaques displayed in OCT images include fibrous, calcified and lipid plaques; microstructures within the plaques may also be observed (5-7).

Figure 1

Types of plaques in optical coherence tomography images. (A) Diagram of normal coronary arteries (scale bar, 1 mm). (B) Magnified image of normal coronary artery wall (scale bar, 0.5 mm). Representative images of (C) fibrous plaque, (D) calcified plaque, (E) lipid plaque, (F) cholesterol crystal, (G) macrophage infiltration and (H) microchannel (arrows, scale bar, 1 mm). EEM, external elastic membrane; IEM, internal elastic membrane.

Table III

Types of plaques in OCT images.

Type of plaque	Feature	OCT image performance	Sensitivity and specificity (%)
Fibrous plaque	The pathological feature is the pathological thickening of the intima, and an intimal thickness of 600 µm is regarded as the limit value between normal and pathological intimal thickening. In OCT, it is characterized by low attenuation, homogeneity and fine texture	It has a relatively uniform and highly reflective optical signal. If the inner elastic membrane and outer elastic membrane cannot be seen in the lesion, the lesion should be carefully considered as a fibrous plaque	79, 97
Calcified plaque[a]	The pathological feature is that calcium salt is deposited in the necrosis and the fibrous cap, and the arterial wall becomes hard and brittle. In OCT, it is characterized by low back reflection and low attenuation, with sharp edges	It is manifested as a sharp-edged low signal or uneven signal area. This definition is suitable for large calcifications. It has not been determined whether the above OCT definition is suitable for micro-calcification	95-96, 97
Lipid plaque	Pathological characteristics: Lipid deposition in the fat streak, smooth muscle cells in the middle membrane migrate into the inner membrane, part of the proliferation forms a fibrous cap, part of the phagocytosis of lipids forms smooth muscle-derived foam cells, which evolve into lipid plaques. In OCT, the edges are blurred or features are illegible	The edge contour is blurred in the weak optical signal area and there is a high signal fiber cap on the surface of the low signal area. When diagnosing lipid plaques deep in tissues, caution is warranted, as the attenuation of OCT signal may also lead to the appearance of weak signal areas. Therefore, OCT is more accurate at identifying lipid plaques and lipid pools near the surface of the lumen. It is generally thought that when the external elastic membrane cannot be identified, OCT cannot measure the thickness, area or volume of the lipid pool. In OCT images, the angle of the lipid pool is frequently used to evaluate the size of the lipid pool	90-94, 90-92
Microstructure within plaque
Macrophage infiltration	The rich lipid components in macrophages may cause significant attenuation or blocking of OCT signals	Highly reflective, strongly attenuated dot or stripe structure, frequently forming radial shadows behind high-signal dotted areas. At present, OCT images mainly evaluate macrophages in fibrous plaques and lipid plaques	-
Microchannel	From the adventitia of the blood vessel to the intima, it communicates with the blood vessels around the adventitia and finally extends to the coronary artery lumen	A hole with a diameter of 50-300 µm, weak signal and sharp edges, and may usually be tracked in multiple consecutive frames. It has not yet been determined whether these blood vessels are connected to the surface of the lumen or originate from nourishing blood vessels	-
Cholesterol crystals	It is usually located in the fibrous cap and the core of lipid. necrosis	Thin linear regions with higher signal strength and lower. attenuation	-

aIncludes four categories: Annular calcification (angle of calcification spots exceeding 270˚), spotty calcification (refers to calcification with an angle of calcification <90˚ and a length <10 mm), deep calcification (refers to the calcified plaque being >100 µm away from the lumen) and superficial calcification (refers to a distance between the calcified plaque and the lumen of 65-100 µm). OCT, optical coherence tomography.

Vulnerable plaque

As early as 1989, Muller et al (8) put forward the concept of ‘vulnerable plaque’ to study acute cardiovascular disease. According to that study, the leading cause of acute coronary syndrome (ACS) is the rupture of an unstable plaque and secondary thrombosis. Kolodgie et al (9) renamed the ‘vulnerable plaque’ to ‘thin-cap fibroatheroma’ (TCFA) after combining the autopsy results of patients who died from cardiac causes. This term refers explicitly to an atherosclerotic plaque with macrophage infiltration and a necrotic center covered by a fibrous cap with a thickness of ≤65 µm (Fig. 2). As presented in Table IV, Naghavi et al (10) provided the histopathological definition and diagnostic criteria of vulnerable plaque (10-12).

Figure 2

Vulnerable plaques. (A) Thin-cap fibroatheroma: The thinnest fiber cap (40 µm, point B; scale bar, 0.5 mm). (B) The plaque is ruptured, the continuity of the fiber cap is interrupted (arrow) and a cavity is formed (asterisk); (C) plaque erosion and complete fibrous cap continuity with mural thrombus (arrow); (D) red thrombus (arrow); (E) white thrombus (arrow; scale bars, 1 mm).

Table IV

Histopathological definition and criteria of vulnerable plaque (10-12). A positive diagnosis was made when one of the main criteria and at least two of the secondary criteria were met.

A, Main criteria
Histopathological feature	Definition and characterisation
Active inflammation	Plaques with active inflammation frequently have a large number of monocytes, macrophages and T lymphocytes infiltrated and aggregated
Thin fiber cap and large lipid core	The thickness of the fibrous cap of these plaques is <100 µm and the lipid core accounts for more than 40% of the total plaque volume
Exfoliation of endothelium with platelet aggregation	These plaques are characterized by superficial erosion with platelet aggregation or cellulose deposition
Damaged or cracked plaque	Most of them are recent ruptures, which may be the cause of subacute thrombosis
Severe stenosis (>90%)	The surface shear force at severely narrowed areas has a vital role in the formation of thrombus and occlusion
B, Secondary criteria
Histopathological feature	Definition and characterisation
Superficial calcified nodules	There are calcified nodules in or near the fiber cap of the plaque. These nodules will highlight the plaque and cause the plaque to rupture. This may not be related to the severity of the calcification
Yellow shiny patches	The yellow plaques under angioscopy suggest large lipid cores and thin fibrous caps, which are easier to rupture, but this indicator lacks sufficient specificity
Bleeding in the plaque	Red blood cell overflow or iron deposits in the plaque may reflect the instability of the plaque
Endothelial dysfunction	Occurring in a variety of acute and chronic disease states, active inflammation and oxidative stress in vulnerable plaques are thought to be related to endothelial dysfunction
Positive remodeling of blood vessels	Studies have indicated that positive vascular remodeling is an important sign of vulnerable plaque

A previous study used OCT to perform imaging analysis on 26 cases with ST-segment elevation myocardial infarction (STEMI) and 16 patients with stable angina pectoris. The results indicated that patients with STEMI had a higher proportion of TCFAs observed in the ‘culprit lesions’ (85 vs. 13%, respectively; P<0.001), while the fibrous cap was thinner (57±12 vs. 180±65 µm, respectively; P<0.001) (13). In addition to TCFA, plaque rupture, plaque erosion, calcified nodules, macrophage infiltration and formation of nutrient blood vessels are all associated with the occurrence of ACS. Thus, the evaluation and quantitative analysis of vulnerable plaques may guide the risk stratification of clinical conditions, as well as the protection and treatment of vulnerable plaques, and help evaluate treatment efficacy.

Advantages and disadvantages of methods used for evaluating vulnerable plaques

In the clinic, the coronary angiography results of numerous patients are not able to display the underlying coronary artery lesions, particularly culprit lesions that are not able to identify thrombosis, whether they are caused by unstable plaque rupture, plaque erosion or calcified nodules. As presented in Table V, although several methods may be used to detect vulnerable plaques, various detection methods have their advantages and disadvantages (14,15). The major factor that determines the vulnerability of plaques is abnormal plaque structure and OCT is able to accurately identify plaque components and microstructure within the plaque due to its high resolution. The superficial calcification and neovascularization of the five main and secondary criteria for vulnerable plaques may be accurately analyzed qualitatively or quantitatively, making it the most ideal imaging technique for identifying vulnerable plaques.

Table V

Advantages and disadvantages of several methods for evaluating vulnerable plaques (14-15).

Modality	Advantages	Disadvantages
CAG	The method of CAG is simple, it requires a short time, has fewer complications and high diagnostic value. To a certain extent, the smoothness and stenosis of the lumen may be observed	The effect of foreshortening leads to underestimation of the length of the stenosis of the lesion and there are large errors in the measurement of the vascular structure at the bifurcation and the eccentric plaque, and it is impossible to clearly determine whether the plaque is a vulnerable plaque
Angioscopy	The surface of the thrombus and plaque may be directly observed and the fibrous cap rupture and thrombosis may be detected. At the same time, the color of the plaque may be observed (white indicates mostly a stable plaque and yellow mostly a vulnerable plaque)	The size of the device is large. It may only be used to observe limited blood vessels and is not able to observe the inside of the plaque and the blood vessel wall. In addition, the blood flow requires to be blocked, which may cause remote ischemia
IVUS	It is able to clearly distinguish the structure of each layer of the blood vessel wall, determine the diameter of the lumen, plaque volume, load and vascular remodeling, and may distinguish the properties of plaque such as lipid core, calcification and fibrous tissue	IVUS may only display image information of plaque subcomponents and not able to provide any quantitative detection. Only the calcified surface structure may be observed and the display effect is not optimal
	With strong penetrating power, it may provide overall and comprehensive imaging information for plaque assessment	The thickness of the fiber cap cannot be accurately determined and the detection of thrombus is not sufficiently sensitive
OCT	It has a high resolution, may accurately evaluate the microstructure close to the lumen, particularly in the unstable components of plaque, such as the thickness of the fiber cap, macrophage infiltration, lipid plaque size or plaque rupture. The fibrous cap thickness measurement is in good agreement with histology	The penetration ability is weak (1-2 mm) and its penetration depth is far less than that of IVUS (8-10 mm). OCT is not able to provide an accurate analysis of the full picture of the lesion. The lesion area covered by the thrombus may not be used for an accurate assessment

OCT, optical coherence tomography; CAG, coronary angiography; IVUS, intravascular ultrasound.

Identification of vulnerable plaques by OCT OCT measures the thickness of the fibrous cap and may identify the thin fibrous cap

The thickness of the fibrous cap is the decisive factor for vulnerable plaques (16). The fibrous cap appears as a high-density, low-reflection image on OCT. OCT may clearly distinguish vulnerable plaques with thin fibrous caps (Fig. 2A). The thickness of the fragile cap, which is widely accepted and recognized in clinical practice, is 65 µm (17). TCFA, in the context of OCT, is defined as a lipid-rich plaque with a thin fibrous cap (the thinnest part is ≤65 µm), and the lipid component in a plaque occupies ≥2 quadrants (17). A previous study performed a histomorphological analysis of 295 coronary plaques (105 fibrous plaques, 88 TCFAs and 102 ruptured plaques) in patients who suffered sudden cardiac death. That study indicated that fibrous cap thickness distinguishes these types of plaques. The critical feature of the TCFA is that the plaque volume increases and the stenosis of the coronary arterial lumen becomes increasingly severe, which may lead to plaque rupture, causing an acute coronary event (18).

Microchannels

A microchannel on OCT imaging is defined as a non-signal luminal structure image of >3 frames that does not communicate with the lumen (19). The greater the number of microchannels (≥2), the higher the proportion of TCFAs and the plaques with microchannels are more likely to rupture (20). On the one hand, microchannels may provide nutrients and oxygen to the heart muscle; on the other hand, they may promote the influx of lipids and inflammatory cell infiltration in coronary plaques. The newly formed microchannels are fragile and easy to rupture, leading to hemorrhage in the plaque, which eventually leads to a rapid increase in plaque volume and narrowing of the lumen (20).

Rupture and erosion of the plaques

On OCT, plaque rupture (Fig. 2B) manifests as intimal tearing, destruction or plaque fibrous cap dissection. Erosion (Fig. 2C) refers to an irregular or discontinuous vascular intimal surface with a tiny thrombus; however, there is no fibrous cap damage or void formation (21). An OCT study systematically classified and defined ACS culprit plaques and indicated that plaque rupture, plaque erosion and calcified nodules under the OCT definition accounted for 43.7, 31.0 and 7.9% of culprit lesions in ACS (22).

Macrophages

Macrophage activity is a crucial feature for evaluating plaque stability. Macrophages appear as dot-shaped areas with abundant, apparent or fused signals on OCT and the noise intensity of this area is stronger than the noise intensity of background spots (21). It has been confirmed that macrophages are associated with the severity of clinical symptoms. A study used OCT to image culprit and non-culprit lesions in a group of patients with stable angina pectoris, unstable angina pectoris (UAP) and STEMI and quantitatively analyzed macrophages in the plaques. The results suggested that the cell density in patients with STEMI and UAP was increased, the density of macrophages in the culprit plaque lesion was higher compared with that of the non-culprit lesion and the macrophage density in the ruptured plaque was greater compared with that of the non-ruptured plaque (23).

Calcified nodules

Calcified nodules appear as low-density areas with distinct edges, distinguished from the fuzzy edges of the fat nucleus (21). Among them, punctate calcification (calcification angle <90˚, length <10 mm) is considered to be one of the characteristics that affect plaque stability. A study using OCT to observe the association between punctate calcification and plaque vulnerability suggested that plaques containing punctate calcifications have more vulnerable plaque characteristics in patients with coronary heart disease. The number of punctate calcifications in the plaque is significantly correlated with the thickness of the fibrous cap; furthermore, the number of punctate calcifications in the plaque is also positively correlated with the incidence of microchannels (24).

Positive vascular remodeling

A study by Vink et al (25) confirmed that positive remodeling of the vascular lumen is related to the instability of the plaque; however, due to the low penetration of OCT, relevant studies are sparse.

Recognition of thrombus

OCT is able to recognize all types of thrombus and it is more sensitive and specific compared with IVUS (Fig. 2). OCT may also clearly distinguish between red and white thrombi in the lesion (21). The red thrombus is a strong backscatter and appears as a radially shaded area with a high signal on the surface and low or no signal posteriorly (Fig. 2D). The white thrombus is a low backscatter, showing a homogeneous region of high or normal signal with an irregular shape (Fig. 2E).

3. OCT guides interventional coronary artery treatment

OCT has significant advantages in evaluating acute lesions, guiding PCI and evaluating the mechanisms underlying treatment failure.

Assessment of borderline lesions

Regarding the diagnostic threshold of OCT for evaluating the degree of coronary artery stenosis and the treatment strategy under the corresponding threshold, there is still no consensus. A previous study compared the diagnostic efficacy of OCT and IVUS for coronary artery disease with fractional flow reserve (FFR) ≤0.8(26). The results suggested that, with a minimal luminal area (MLA) of 1.95 mm² as the cutoff value, OCT has moderate diagnostic power, with a sensitivity of 82% and a specificity of 63%. With an MLA of 2.63 mm² as the cutoff value, the sensitivity decreases to 67% and the specificity is 65%, and there is no statistically significant difference between OCT and IVUS in terms of diagnostic performance [area under the curve (AUC): 0.70, 95% confidence interval (CI): 0.55-0.83 to AUC: 0.63, 95% CI: 0.47-0.77; P=0.19]. In the subgroup of small blood vessels (reference diameter <3 mm), OCT provided significant advantages (AUC: 0.77, 95% CI: 0.60-0.89 vs. AUC: 0.63, 95% CI: 0.46-0.78; P=0.04). However, although OCT has higher diagnostic power compared with IVUS in this subgroup, its specificity for evaluating functional stenosis is low.

Furthermore, it is not sufficient to formulate a treatment strategy solely based on the degree of stenosis or the length of the lesion (27). The nature of the plaque frequently provides important information and it is also of far-reaching significance for guiding clinical treatment. The advantage of OCT lies in the accurate identification of thrombi, vulnerable plaques and minor lesions, such as intimal erosions and tears. A number of coronary angiograms may indicate borderline lesions with moderate stenosis. OCT examination may uncover the presence of unstable lesions with a high possibility of acute events. Therefore, the study of borderline lesions should shift the focus to screening for high-risk vulnerable plaques and ensure early intervention to reduce ACS events. The new generation of OCT integrates the detection function of FFR and obtains morphological and functional information at the same time. This achieves the guiding effect of optimizing the treatment of critical lesions (28,29).

OCT assists in guiding PCI treatment

For patients requiring PCI treatment, surgeons may use OCT to analyze the composition and characteristics of the plaque in order to guide the pre-treatment or pre-dilation of the diseased vessel and to help the interventionist select the length, size and type of the stent or balloon.

Selection of the stent diameter

The principle of selecting the diameter of the stent to guide CAG is that the ratio of the diameter of the stent to the vessel diameter is 1.1:1. However, only the size of the stent is selected based on the results of the angiography and the opinions of different surgeons may vary. Since OCT may display the exact blood vessel contour and vascular wall structure, the selection of the diameter of the stent is more accurate compared with CAG (28). In addition, OCT may indicate the reference blood vessel diameter according to the severity and stability of the vascular disease at both ends of the lesion. The ILUMIEN III study selected different stent schemes according to whether the media may be detected in the reference segment of the OCT image (26). If the media are visible, the minor media layer diameter (usually the distal end) is measured as the reference value of the stent diameter. If the media is not visible, the minimum diameter of the reference segment automatically measured by the machine is selected as the reference value of the stent diameter. In the era of bioabsorbable stents, in theory, it may be more appropriate to select the diameter of the stent based on the media to prevent the thicker surface of the stent rod from protruding into the lumen and affecting blood flow (30).

Determination of the requirement for stent post-expansion

The requirement for post-expansion following stent implantation is mainly determined by the attachment and expansion of the stent. In principle, the expansion rate of the metal stent should reach >80% and the expansion rate of the absorbable stent should reach >90%. Poor stent expansion is closely associated with stent restenosis and thrombosis in the stent. The ILUMIEN II study confirmed that OCT and IVUS have comparable efficacies in evaluating stent expansion (30,31). If the stent displays poor expansion, a non-compliant balloon of the same caliber should be used to apply high pressure and fully expand the stent. The determination of poor stent adhesion by using OCT is more sensitive compared with IVUS. In the OCT image, the ‘expansion rate’ may be used to evaluate stent expansion. In general, the expansion rate is 90% critical for evaluating the immediate underexpansion. The ILUMIEN I study determined that the OCT detection underexpansion ratio may be as high as 41.3% (28). The stent expansion rate is calculated as follows:

Selection of the landing point of the support

IVUS and OCT studies have indicated that, if the stent is placed on an unstable plaque, it is prone to long-term restenosis or edge dissection after implantation (30-32). Of note, in theory, the stent should be placed on the regular blood vessel segment, where angiography appears normal, OCT and IVUS examinations still have specific load plaques (even TCFA), so OCT examinations should be used and the selection is relatively stable. The normal blood vessel segment is used as a reference to accurately measure the diameter of the blood vessel, which not only ensures the efficacy of stent implantation but also avoids excessive damage to the blood vessel wall at the edges of the stent.

OCT evaluation of the immediate effect of stent PCI

The optimal stent implantation effect is that the stent adheres to the wall and expands well. Furthermore, it is not accompanied by dissection of the stent edge, tissue prolapse or thrombosis in the stent. OCT may identify a higher rate of complications after stent implantation, such as stent edge dissection, tissue prolapse and stent thrombosis.

Stent expansion

In the drug-eluting stent (DES) era, poor stent expansion is one of the fundamental reasons for in-stent restenosis and thrombosis. A previous study indicated that, whether it is a first-generation or second-generation drug stent, the minimum stent area (MSA) is >5.0 mm2 (28). If the stent does not expand properly, the incidence of thrombosis in the stent will increase significantly within 1 year (33). Particularly in cases with left main disease, the MSA goal is to achieve circumflex branch opening >5.0 mm2, anterior descending branch opening >6.0 mm2, left main trunk end >7.0 mm2 and left main trunk body >8.0 mm2 (33). In general, calcified lesions and plaques form on a background of heavier eccentric fibrous lesions, prone to poor stent expansion. Therefore, adequate pretreatment should be performed for such lesions. For instance, eccentric fibrous plaques should be fully pre-dilated and severely calcified lesions should be treated with rotational atherectomy or balloon incision (34). After PCI, poor stent expansion should be actively treated. Non-compliant balloons may be used to expand the stent by applying high pressure and OCT should be performed again after expansion to determine the adequacy of expansion.

Stent malapposition (SM)

SM on OCT images means that the longitudinal distance from the stent trabecular surface to the lumen surface is greater than the thickness of the stent trabecula (if there is a polymer on the stent trabecula, it should also be included in the measurement). When the distance between the two is >200 µm, this is defined as significant adhesion failure (Fig. 3A and B). Clinically, if the stent area poorly adhered to the wall is small and is not accompanied by poor stent expansion, no treatment is required (34). However, in the presence of SM and poor stent expansion, MSA <5.0 mm2 post-expansion is recommended to ensure adequate stent expansion and adherence. In a follow-up study of OCT, poorly adhered stent filaments may also gradually be covered by endothelial cells and completely fuse with the vessel wall (35). Previous studies have performed OCT serial detection on 78 blood vessel segments where the stent wire was poorly attached immediately after surgery. The 6-month follow-up after the operation suggested that the volume of poorly adhered stents immediately after the operation decreased significantly and 75% of the stents that were poorly adhered immediately after the operation were completely fused with the vessel wall. This indicates that SM may delay the healing process of damaged blood vessels. When the distance between the stent wire and the vessel wall is narrow, the proliferating neointimal tissue may frequently cover the distance to the poorly adhered stent wire (35,36).

Figure 3

Evaluation after stent implantation. (A) The stent adheres well to the wall. (B) The stent is obviously poorly attached to the wall (indicated by the arrow). (C) Prolapse of the plaque (arrow). (D) Thrombus prolapse (arrow). (E) The stent trabeculae are embedded in the inner membrane and covered well (arrow). (F) Neoatherosclerosis in the stent. Hyperplastic endothelium within the stent is a high signal, followed by significant signal attenuation and blurred margins, suggesting lipid deposition, but not the formation of a true necrotic core (asterisk).

Dissection of the stent edge and tissue prolapse

Following stent implantation, damage to the blood vessel wall often occurs at the edge of the stent. OCT is able to detect 37.8% of stent edge dissections (37). The edge dissection of the stent may be divided into intimal tear and media dissection. Intimal tear refers to the sheet-like lifting of the intima after stent implantation, without any obvious rupture of the plaque fibrous cap. Media dissection refers to the intimal tear extending to the media of the coronary artery, which may lead to intracoronary hematoma. In general, the severity of interlayer dissection, the angle at which the interlayer occurs and the length measured on the vertical axis images are taken into consideration. Stent edge dissection is closely associated with in-stent thrombosis and poor prognosis. Compared with superficial layer dissection, stent edge dissection involving the deep layer of the coronary artery wall significantly reduces the survival rate of patients without clinical events (38).

On OCT imaging, tissue prolapse is defined as tissue protruding from the lumen between the trabeculae of the stent after the stent is implanted. Tissue prolapse may be divided into plaque prolapse (Fig. 3C) and thrombosis (Fig. 3D). Plaque prolapse usually has a smooth surface without apparent signal attenuation, while thrombosis usually has an irregular surface with solid attenuation. The incidence of tissue prolapse after stent implantation is high. It was reported that 95% of stents may be detected by OCT immediately after implantation (30). The occurrence of tissue prolapse after PCI is associated with the nature of the plaque. When the stent is located on the TCFA or necrotic nucleus defined by OCT, tissue prolapse is likely to occur (39). Irregular tissue prolapse is an independent predictor of adverse clinical events after PCI (Table VI).

Table VI

Treatment principles for vascular dissection after stent implantation and the main treatment principles for tissue prolapse in the stent after stent implantation.

A, Principles of treatment of vascular dissection after stent implantation
Type of vascular dissection	Processing principle
For intimal dissection with no clinical symptoms, no ischemic ECG changes, TIMI blood flow grade III	No special treatment
For dissection involving the vascular media, even intra-vascular hematoma or vascular rupture	Implant the stent immediately
The severity lies between the above two	If the edge of the stent dissection is >60˚, the length of the dissection is >3 mm, the distal TIMI blood flow is affected, and the MLA is <5.0 mm2, the stent should be further implanted to avoid serious clinical consequences
B, Major treatment principles of tissue prolapse in the stent after stent implantation
Type of tissue prolapse	Processing principle
The amount of tissue prolapse in the stent is small, the protruding lumen is <200 µm, prolapsed area is <10% of the area in the stent, the stent expands well and the TIMI blood flow is grade III	Should not intervene temporarily, postoperative antiplatelet therapy should be strengthened
The amount of tissue prolapse in the stent is large, the protruding lumen >200 µm, the prolapsed area is ≥10% of the internal area of the stent and the stent is poorly expanded	Use of a balloon with the same diameter as the stent for high-pressure expansion
The effect of the above two methods is still not obvious	It may be considered to implant a stent in the prolapsed tissue to cover the prolapsed tissue to increase the effective lumen area

TIMI, thrombolysis in myocardial infarction; MLA, minimal luminal area.

Immediate stent thrombosis

Immediate stent thrombosis on OCT appears as an irregular mass that protrudes into the lumen immediately after stent implantation. Although stent thrombosis is rare, it frequently leads to PCI complications with severe clinical events. At present, OCT is the only imaging technique other than angioscopy that may identify ~100% of thrombi. For stent thrombosis detected by OCT, corresponding treatment measures should be taken according to the severity, the patient's clinical manifestations and the hemodynamic impact. First, for immediate stent thrombosis with low thrombus volume, no clinical symptoms, no ischemic ECG changes and no severe hemodynamic disorders, anticoagulation and dual antiplatelet therapy should be administered. If the volume of the thrombus in the stent is larger, the patient has obvious ischemic symptoms and severe hemodynamic disorders, a suction catheter may be used for thrombus aspiration to reduce the load of the thrombus in the stent. If there is no apparent improvement after aspiration, following intracoronary administration of a dose of tirofiban, a balloon with the same diameter as the stent should be used for low-pressure expansion. If the effect of the aforementioned method is still not sufficient, re-implanting a stent at the thrombus should be considered. The immediate causes of thrombosis in the stent (such as poor expansion, immediate SM and dissection of the stent edge) identified on OCT should be dealt with accordingly as described above (40).

4. OCT guides complex lesion management

Left main disease

Left main coronary artery lesions refer to lesions with stenosis of the left main coronary artery by ≥50% on CAG. This is one of the common clinically complex lesions. In recent years, with the advances in technology, left main bifurcation lesions are no longer considered to be a contraindication for PCI treatment (Table VII) (27,41).

Table VII

Several features used in the examination of left main lesions (4,27,41).

A, CAG
Consideration	Comments
Judement of the degree of stenosis	Surgeons have different judgments on the degree of stenosis of coronary angiography and they frequently underestimate the degree of stenosis of coronary artery disease
Diffuse left main disease	When the left main disease is diffuse, it is difficult for angiography to accurately reflect the diameter of the blood vessel, which affects the choice of stent diameter and ultimately affects the effect of PCI
Left main ostium imaging	During the left main ostium imaging, the contrast agent flows back to the aorta, resulting in unclear visualization of the coronary ostium
Left main artery emergence	When the left main artery emerges from the aorta with an acute angle or the left main body is curved, the severe stenosis is easily missed by coronary angiography
Coronary angiography	Coronary angiography is not able to provide any detailed information on plaque composition and immediate effects after PCI
B, IVUS
Consideration	Comments
Preoperative IVUS examination	Preoperative IVUS examination may confirm stenosis of the left main lesion, the length of the lesion and the characteristics of the plaque
Intraoperative IVUS	Intraoperative IVUS may determine the position and accuracy of the reset side guidewire, exclude the guidewire from passing outside the stent and avoid serious deformation of the stent
Postoperative IVUS	Postoperative IVUS examination may clarify the immediate effect of the stent and postoperative complications, and reduce the occurrence of postoperative cardiovascular adverse events
IVUS in combination with FFR	IVUS combined with FFR may guide the choice of treatment strategies for borderline left main lesions
C, OCT
Consideration	Comments
OCT scanning speed	The scanning speed of the left main disease is faster (25 mm/sec), which may reduce the inter ference of the cardiac cycle on coronary artery imaging
Accuracy of area and diameter measurement	Measurement of the smallest lumen area and diameter and the evaluation of the composition are more accurate (4)
OCT evaluation of effects and OCT sensitivity	OCT may clearly evaluate the immediate effects, vascular wall damage and complications after PCI, and is more sensitive than IVUS
ILUMIEN™OPTIS™ system real-time three-dimensional imaging	The ILUMIEN™OPTIS™ system may perform real-time three-dimensional imaging of the left main lesion, which may finely determine the extent, length, stenosis and reference blood vessel diameter of the lesion, and it is convenient for the surgeon to observe and analyze the blood vessel from multiple angles to make a correct assessment
ILUMIEN™OPTIS™ system integration of FFR	The ILUMIEN™OPTIS™ system integrates the FFR function, so that it has both morphological and functional evaluation functions, so as to more comprehensively evaluate the coronary artery function
OCT transmission depth	OCT transmission depth is small and the remodeling changes of the blood vessels and the surrounding conditions of the blood vessels cannot be evaluated. This is the drawback in guiding PCI treatment of the left main disease

OCT, optical coherence tomography; CAG, coronary angiography; IVUS, intravascular ultrasound; FFR, fractional flow reserve; PCI, percutaneous coronary intervention.

Bifurcation lesions

A bifurcation lesion of the coronary artery refers to a >50% stenosis of the opening of the main vessel and branch vessel. This is a complex type of lesion with a high failure rate of coronary stent implantation (42). Atherosclerosis readily develops at the bifurcation of the blood vessels due to the high shear stress of blood flow.

Preoperative OCT examination may accurately measure the stenosis of the main branch and branch opening, the length of the lesion and the distribution and the nature of the plaque, and it may help the surgeon select the appropriate interventional device and branch stent treatment strategy. It should be determined whether single-stent or multi-stent technology may be used or whether branch vessels require to be protected. OCT indicates that, for the proximal wall of the branch in which TCFA frequently occurs, the double-stent technology (such as crush T-stenting) is required. The multi-layer stent trabecular attachment site may easily lead to poor stent adhesion, uneven drug distribution and vulnerable plaques. Rupture of the stent may lead to embolism of the distal branch and the occurrence of the ‘no-flow’ phenomenon (43). In terms of imaging, it may prevent the implantation of the stent on the TCFA. OCT may be used to guide the branch guidewire to enter the branch from the middle or distal mesh to achieve a satisfactory balloon anastomosis and expansion of the stent to adhere to the vascular wall.

OCT examination after surgery may be performed to observe the adhesion and endothelialization of the stent at the bifurcation, thereby reducing the occurrence of thrombosis in the stent. In addition, the real-time 3D imaging function of the ILUMIEN™ OPTIS™ OCT system may also reveal the spatial distribution and structure of blood vessels, analyze the blood vessels at all angles freely in space and guide the re-entry of the guidewire (44). It was reported that 3D-OCT-guided stent implantation for bifurcation lesions is feasible and may reduce the occurrence of stent malapposition (45). Therefore, this application should be considered as a guidance in the clinical treatment of bifurcation lesions.

Chronic occlusive disease

In recent years, with the development of interventional devices, considerable progress has been made in the treatment of chronic total occlusion (CTO), but the success rate of CTO intervention remains relatively low and faces several challenges (46). In this complex disease, the information provided by OCT may affect successful completion of the operation.

There have been reports of in vitro experiments using the forward-looking OCT system to perform multi-axis imaging of occluded blood vessels to construct cross-sectional images of the affected vessels (47). OCT is able to distinguish between different levels of the occluded lumen and vessel wall, and it is possible to identify microchannels. This information may be used to guide the wire through the lesion. Once the guidewire has passed through the occluded segment, OCT may detect the plaque component that caused the occlusion.

In addition, an OCT study indicated that the intimal repair of CTO lesions is delayed after stent implantation; thus, OCT may help determine the time limit of dual antiplatelet therapy following stent implantation in CTO lesions (48). It should be pointed out that the currently available evidence on OCT as a method for guiding the treatment of CTO lesions is insufficient and further research is required.

Calcified lesions

When severe annular calcification is detected on OCT, direct implantation of stents should be avoided and pre-dilation or experimental expansion strategies should be considered first (49). Balloon cutting or coronary atherectomy may be used in short calcification rings. It should be noted that there is currently no clear cutoff value (calcification angle, length or thickness) that may be used as an indication for balloon incision or coronary atherectomy (50).

Calcified lesions limit the expansion of blood vessels and balloons; therefore, calcified lesions frequently lead to poor stent expansion (49). OCT may accurately assess the expansion of the stent, thereby guiding the selection of a suitable post-expansion balloon. It was indicated that the calcification angle and calcification area measured by OCT are negatively correlated with the MSA and the minimal stent diameter after DES expansion (49).

5. Application of OCT in the post-stent implantation follow-up

OCT has significant advantages in assessing the repair of blood vessels after stenting and the mechanisms underlying treatment failure.

OCT assessment of intimal coverage

The thickness of the stent intima measured by OCT has been indicated to be highly correlated with the thickness of the tissue (r=0.85, P<0.01), with excellent repeatability of the thickness measurement between individuals or the same intima (51). OCT has a sensitivity of 80% and a specificity of 95% for detecting incomplete stent intimal coverage. For stent neointima (Fig. 3E) with a thickness of >100 µm, it may be divided into three categories according to OCT image characteristics: The first is characterized by homogeneity, high reflection and a relatively uniform signal, with no local attenuation signal. The second involves layered, centripetal, double-layer or multi-layer optical signals, the near lumen side usually has high-reflection signals and the far cavity side usually has low-reflection signals Finally, the third category is characterized by heterogeneity, with low reflection and an uneven signal, with local solid signal attenuation.

With the advancement of technology, OCT study hasdetermined that the second-generation everolimus-eluting stent (EES) achieves significantly faster intimal repair compared with the first-generation sirolimus-eluting stent (SES) and the surface endothelialization is relatively complete (52). This discovery has prompted several scholars to consider that the existing dual-antiplatelet therapy strategy may be changed. It is recommended that the current dual-antiplatelet therapy is shortened to 9 months and certain scholars even proposed to shorten it to 6 months (53). It was also reported that, in patients with EES implantation, the 6-month dual-antibody treatment is not inferior to the 12-month treatment plan (54). The application of OCT to evaluate direct intimal coverage appears to be highly promising for guiding the clinical standards for dual-antibody treatment after stenting. To date, certain scholars have proposed using OCT to guide individualized dual-antibody therapy and examined whether it is possible to use OCT to evaluate the trabecular coverage of the stent to adopt an individualized antiplatelet therapy plan, and whether the characteristics of intimal tissue observed on OCT may be used in individualized dual anti-platelet therapy and basic anti-atherosclerosis treatment programs (51). However, due to the lack of a specific evaluation model and a unified evaluation plan, these are issues worthy of further consideration. Since the incidence of in-stent thrombosis is inherently low, a large sample size is required by further clinical studies to confirm the advantages of OCT in guiding antiplatelet therapy, which is associated with major practical difficulties. However, with the increase in follow-up data of OCT stents, real-world registration studies may help solve this problem and even change the existing guidelines on the recommended duration of dual-antibody application after stenting.

In terms of identifying the potential clinical risks and intervention factors of the neointima, OCT is a powerful tool that has achieved significant research results. Kubo et al (55) reported that intimal stent coverage was significantly delayed in patients with UAP. Kochman et al (56) used OCT to follow up the DESs and bare metal stents (BMSs) of diabetic patients for 2 years and observed that the intima remained uncovered 2 years after the DES was implanted. Furthermore, the intimal coverage of the stent is unrelated to whether the patient has diabetes. A Japanese clinical study on OCT indicated that atorvastatin treatment may affect the migration of endothelial progenitor cells (EPCs), thereby accelerating the repair and endothelialization of the endothelium after SES implantation. In addition, different statin drugs may affect EPC migration (57). There are apparent differences in the promotion effect of membrane repair. These studies have provided research directions and intervention targets for promoting stent intimal healing and reducing long-term stent-related clinical problems from the perspective of OCT.

OCT assessment of neoatherosclerosis

It was initially suggested that, at 6-12 months after BMS implantation, neointimal hyperplasia caused lumen stenosis. As the tissue matures, the lumen area tends to stabilize or even improve (58). However, an increasing number of studies have confirmed that the stable fibrotic endometrial tissue in these stents may gradually develop into unstable atheromatous plaque tissues, leading to late stent failure (58-60). Complex atherosclerosis that occurs in the neointimal tissue after stent implantation is defined as neoatherosclerosis (Fig. 3F). Regarding the phenomenon of neoatherosclerosis plaques in stents, the underlying mechanisms and clinical intervention methods remain to be explored, which is an important direction for future basic and clinical research.

OCT may serve an important role in the mechanism and intervention of neoatherosclerosis. The neoatherosclerosis in DES is likely associated with severe local inflammation in the early stage after stent implantation. Furthermore, neoatherosclerosis is mainly distributed around the trabeculae. The occurrence of plaque in a bare stent is gradually formed after the stent intima proliferates to a certain thickness. The new plaque is at a certain distance from the trabecula of the stent, which is similar to the occurrence of coronary plaque in situ. An OCT study demonstrated that the progression of neointimal atherosclerosis after stent implantation is associated with the progression of an in situ plaque in the autologous coronary artery (60). This result is expected, as the new plaque has the same risk as the in situ plaque. In addition, similar to in situ plaques, new blood vessels have an essential role in the occurrence and development of new plaques in stents, particularly in diabetic patients (61,62). An OCT study determined through multiple regression analysis that low-density lipoprotein-cholesterol levels >70 mg/dl, smoking and chronic kidney disease are risk factors that promote the occurrence of new plaques. By contrast, angiotensin-converting enzyme inhibitors are effective defense pathways that prevent the occurrence of new plaques (63). Therefore, this type of drug may inhibit the formation of neoatherosclerosis plaques to a certain extent. Traditional cardiovascular risk factors, such as sex, hypertension, diabetes and hyperlipidemia, cannot predict the occurrence of neoatherosclerosis plaques following stent implantation (64); this demonstrates that, although the histological and imaging characteristics of neoatherosclerotic plaques and primary atherosclerosis are similar, there may be marked differences in the underlying mechanisms. With the advancement of evaluation methods, early screening of neoatherosclerosis plaques and active control of related risk factors may help improve the long-term prognosis after PCI.

OCT determines the cause of stent failure

The main reasons for stent failure are in-stent restenosis (ISR), intra-stent thrombosis, SM and stent fracture (SF). However, it is challenging to discover the pathological mechanisms leading to the failure of stent implantation by angiography alone. The use of OCT to follow up patients with late stent implantation failure may help elucidate their types and underlying mechanisms, which is conducive to the improvement of stent design and the optimization of surgical procedures, thereby preventing stent failure caused by various mechanisms.

ISR

ISR may be divided into imaging and clinical restenosis. Following stent implantation, the former refers to the CAG performed to confirm that the stent implantation segment loses ≥50% of the lumen. On OCT images, ISR means that the area in the neointima of the stent exceeds 50% of the area of the stent. OCT may quantitatively measure ISR at the lesion level, mainly by measuring the thickness of the neointima, the area of the neointima, the calculated volume of the neointima and the volume of neointimal hyperplasia obstruction rate (the ratio of the average neointimal volume to the average stent volume) to assess the degree of ISR.

Previous studyreported that coronary artery balloon dilatation, paclitaxel drug-coated balloon or DES implantation may be performed for ISR (65). During a follow-up over ~200 days, the histological characteristics of the stent intima detected by OCT were indicated to be associated with the reappearance of ISR and the prognosis of restenosis with different tissue characteristics was significantly different with different treatment methods. It is suggested that the causes of restenosis of clinical stents are different (intimal hyperplasia, atherosclerosis and stent thrombosis) and the treatment methods for restenosis should also be different. Therefore, OCT examination may help analyze the causes of ISR and the degree of stenosis and help guide treatment planning.

Stent thrombosis

The detection sensitivity of OCT for stent thrombosis is higher compared with that of CAG and IVUS. OCT may identify thrombi and distinguish between red and white thrombi by the thrombus components, which is of significant reference value for assessing the composition of acute stent thrombosis. OCT may detect small thrombi attached between the stent wires that have not adhered to the wall and provide accurate measurement of the size and length of the stent and the luminal area of the blood vessel. In addition, OCT has a specific guiding effect on the dosage and course of clinical antithrombotic drugs (66).

Guagliumi et al (67) studied 18 patients with advanced stent thrombosis in DES. All patients underwent thrombus aspiration prior to OCT and IVUS examinations. It was determined that the non-filament coverage rate in the stent thrombosisgroup was 12.27%, which was significantly higher compared with the 4.14% in the control group. The results of lVUS demonstrated that the stent expansion degree of the two groups was similar but the positive vascular remodeling was more significant in the advanced stent thrombosis group. Multivariate analysis suggested that the uncovered segment length of the stent wire determined by OCT and the IVUS remodeling index were independent predictors of advanced stent thrombosis (67).

Late SM (LSM)

SM refers to the apparent separation of the stent trabeculae from the vessel wall and may be divided into early and late SM. A previous study demonstrated that LSM may cause stent thrombosis. Compared with the control group, the incidence of SM in patients with very advanced thrombosis (77 vs. 12%, respectively; P<0.001) and the area of SM (77 vs. 12%, respectively; P<0.001) were significantly increased (68). A total of 20 cases of late and very late stent thrombosis were examined through OCT, indicating that 11 cases (55%) had SM, of which 5 cases had LSM caused by abnormal positive remodeling of the vessel wall (68). However, the incidence of LSM is notably higher than the incidence of late stent thrombosis, indicating that, although LSM may not be the sole cause of stent thrombosis, it may be one of the critical factors contributing to the formation of stent thrombosis.

OCT carries unique advantages in assessing postoperative SM. The high resolution of OCT may detect SM not detected by IVUS. As IVUS cannot detect this type of SM, there is no corresponding balloon expansion. However, the ratio of SM detected by OCT is relatively high (69). When compared with IVUS, is it unclear whether the higher number of SMs detected by OCT require balloon expansion, whether these SMs may self-repair and what is their prognosis. These questions must be addressed through further clinical research.

SF

The incidence of SF is low. However, with the increase in the number of stent implantations, an increasing number of SF cases are being reported, particularly in cases of DES implantation (70). In the past, OCT machines lacked 3D imaging tools and OCT cross-sectional images were not associated with obvious advantages in SF. The emergence of OCT 3D real-time reconstruction systems enables the use of OCT to study the occurrence of SF and its clinical significance (30,71). 3D OCT may help diagnose SF and determine the effect of SF on local endometrial repair and local external stent plaque. Through OCT, it is also possible to identify the factors that are likely to cause SF.

While, SF may cause local mechanical vascular irritation, leading to inflammation and neointimal hyperplasia, the fracture destroys the local stent structure, causing thrombosis and blood flow blockage and affecting the blood supply to the heart. Stent trabecular fracture may also represent a potential mechanism underlying ISR and stent thrombosis. The incidence of SF in EES has been reported to be 1.7%. The 9-month follow-up indicated that SF was associated with revascularization of the target lesion caused by the event (18.7 vs. 2.3%) (72). The incidence of fracture after implantation of the noboribiolimus-eluting stent reached 4.1%, which is also associated with the revascularization of the target lesion induced by ischemic events (73).

6. Factors and common problems affecting OCT imaging results

OCT imaging results rely on standards and correct operational techniques

In order to optimize the quality of OCT images, the operator requires certain techniques to guide catheter operations. Several factors affect the results of OCT imaging, including excessive branch blood vessels, excessive lumen width, excessive vascular bending, severe stenosis of the lumen, the effect of cardiac cycle motion on the image and factors related to intraoperative procedures. During the operation, attention should be paid to the coaxiality of the guide tube and the target vessel, the use of a contrast agent bolus, the synchronization of image acquisition and the avoidance of red blood cells or air bubbles in the imaging catheter or in the bolus contrast agent.

Branch vessel

When encountering a relatively large branch vessel, it may affect the measurement accuracy and image recognition. At this time, it is necessary to omit the branch vessel segment and select a normal lumen to start a new measurement (Fig. 4A).

Figure 4

Factors affecting OCT imaging results. (A) Branch vessel (asterisk). (B) Bubble artifacts (arrow). (C) Saturation artifacts (arrow; scale bar, 1 mm). (D) Incomplete image (scale bar, 2 mm). (E) Blood that was not washed away. (F) The guidewire is damaged. (G) Staggered layer artifacts. (H) The incorrect measurement method was used at the fault level. (I) The correct measurement method was used at the staggering level (scale bar, 1 mm). The A in G-I indicates the staggering layer. The green line indicates the measured lumen profile.

Bubble artifacts

The formation of small bubbles in the silicone lubricant between the sheath and the optical fiber may attenuate the blood vessel wall signal in the corresponding area. This type of image is not suitable for the analysis of tissue characteristics (Fig. 4B).

Saturation artifacts

The high specular reflection of the beam (usually the stent trabeculae) produces an amplified signal, which appears as axial linear stripes on the image (Fig. 4C).

Incomplete image

If the image area is <3/4 of the normal area, it is difficult to ensure the accuracy of the measurement data. In such cases, this frame or segment of the image may be omitted from the analysis (Fig. 4D).

Unwashed blood

When the blood in the lumen is not washed out during imaging, the red blood cells defocus the light beam and weaken the brightness of the vessel wall, creating an artifact. Furthermore, residual blood must be distinguished from a thrombus (Fig. 4E).

Guidewire damage

When the guidewire is damaged, abnormal images may be obtained. Fig. 4F presents images occurring when the two guidewires are damaged.

Splitting artifacts

In one frame of imaging, the artery or the guidewire is quicker than the other, causing the signal points of the lumen boundary to be out of sync, resulting in layering artifacts. This must be distinguished from intimal tears (Fig. 4G and H).

7. Application prospects of OCT in the field of cardiovascular interventional diagnosis and treatment

With the continuous improvement of OCT, it is expected to have an important role in the examination of coronary intravascular lesions, the optimization of PCI strategies and the development of novel stents. The expected future development directions and advantages of OCT are listed below (29,74-78).

i) The currently used frequency domain-OCT retracement speed is up to 40 mm/sec, 158 frames of images/sec, and the A-line frequency is 81 kHz. This causes 2-3 heartbeats to be affected every 50 mm of retracement, resulting in blurred 3D imaging edges. If the withdrawal speed was to be accelerated to >100 mm/sec, >3,000 frames of images/sec and A-line frequency >1.5 MHz, and combined with catheter positioning and tracking technology, the 3D imaging would be clearer and more accurate, and the clinical guidance value would be significantly improved. The bolus of the contrast agent should also be markedly reduced.

ii) Micro-resolution OCT (micro-OCT) has a resolution of up to 1 µm, which may analyze the microstructure of the atherosclerotic plaque, plaque rupture, thrombus, neointima and other tissues, at the cellular or subcellular level. The cellular components of the plaque may provide a novel imaging method. Once micro-OCT is used in human research, it may dynamically observe certain cellular components and the stability and correlation of atherosclerotic plaques or determine which cellular components (such as endothelial cells, macrophages and smooth muscle cells) are able to affect the intima of the stent. These future applications of OCT may lead to breakthroughs in the current understanding of the development of atherosclerosis and stent intimal coverage, and may change existing views and provide novel therapeutic intervention targets.

iii) Combining two or more imaging technologies may be used to make up for the deficiencies of a single imaging method. OCT-IVUS: Integrating OCT and IVUS on one imaging catheter not only takes advantage of the high resolution of OCT, but also penetrates through the IVUS catheter, and the depth is markedly increased. OCT-NIRS: NIRS may perform an accurate and real-time in vivo assessment of lipid core plaques. Combining NIRS technology with OCT and applying them to intracoronary imaging may not only uncover the morphological characteristics of the plaques but may also identify the chemical composition of the plaque.

iv) Real-time integration of structural and functional imaging information, such as OCT-FFR institutional functional testing technology, may provide more accurate assessment and guidance of treatment strategies for critical lesions, while improving the current status of excessive implantation of stents in the clinical setting.

v) Combining OCT and fluorescent molecular labeling technology may provide information on inflammation and endothelial function in the plaque, which is conducive to the in-depth study of the pathophysiological processes of the atherosclerotic plaque and the processes involved in stent repair.

vi) More large-sample OCT prospective clinical studies are required to change or improve existing interventional treatment strategies in certain controversial areas. Accumulating the clinical data of OCT in determining the characteristics of lesions and guiding precision interventional treatment may promote the priority recommendation level of OCT in guidelines for the diagnosis and treatment or revascularization in coronary heart disease.

8. Summary

OCT is a high-resolution intravascular imaging method for evaluating the composition of the coronary arterial wall and the stability of the atherosclerotic plaque, optimizing the efficacy of stent implantation, and evaluating the long-term effectiveness and safety of the stent. Currently, the interventional diagnosis and treatment of coronary heart disease require better interventional results for patients, as well as individualized and customized optimal strategies. With the innovation and progress of OCT technology, clinical research evidence is markedly more sufficient and interventional physicians have mastered the OCT operating system. It is thought that the application of this modality in clinical and basic research of coronary artery atherosclerosis, the selection of treatment strategies for acute coronary syndromes, the optimization of interventional treatment effects, the evaluation of the effect of novel stents, the stent intima coverage and the selection of double antibodies, have become increasingly extensive. Furthermore, to a certain extent, OCT may change or affect the currently applied coronary interventional treatment strategies (4,5,79).