Literature DB >> 35207159

The Evaluation of DHPMs as Biotoxic Agents on Pathogen Bacterial Membranes.

Barbara Gawdzik1, Paweł Kowalczyk2, Dominik Koszelewski3, Anna Brodzka3, Joanna Masternak1, Karol Kramkowski4, Aleksandra Wypych5, Ryszard Ostaszewski3.   

Abstract

Herein, we present biological studies on 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) obtained via Biginelli reaction catalyzed by NH4Cl under solvent-free conditions. Until now, DHPMs have not been tested for biological activity against pathogenic E. coli strains. We tested 16 newly synthesized DHPMs as antimicrobial agents on model E. coli strains (K12 and R2-R4). Preliminary cellular studies using MIC and MBC tests and digestion of Fpg after modification of bacterial DNA suggest that these compounds may have greater potential as antibacterial agents than typically used antibiotics, such as ciprofloxacin (ci), bleomycin (b) and cloxacillin (cl). The described compounds are highly specific for pathogenic E. coli strains based on the model strains used and may be engaged in the future as new substitutes for commonly used antibiotics in clinical and nosocomial infections in the pandemic era.

Entities:  

Keywords:  3,4-dihydropyrimidin-2(1H)-ones (DHPMs) obtained by Biginelli reaction; DNA-N-glycosylase; Fpg protein formamidopyrimidine; lipopolysaccharide (LPS)

Year:  2022        PMID: 35207159      PMCID: PMC8878598          DOI: 10.3390/membranes12020238

Source DB:  PubMed          Journal:  Membranes (Basel)        ISSN: 2077-0375


1. Introduction

3,4-Dihydropyrimidin-2(1H)-ones (DHPMs) are heterocycles with a pyrimidine moiety in their structure, synthesized via multicomponent Biginelli reaction [1,2] under various reaction conditions [3,4,5]. These compounds are of great importance in microbiology and medicinal chemistry due to their specific biological and pharmacological activities [6,7]. Monastrol as a specific compound is a protagonist of the DHPM class. Research has revealed that its action as an inhibitor on human kinesin Eg5 leads to apoptosis by mitotic spindle arrest [8,9,10,11]. Reported data show other possible targets for these molecules, such as centrin [12], calcium channels [13] and topoisomerase I [14]. Pharmacological properties are reported to include anticancer [15] anti-inflammatory [16], antihypertensive [17], antibacterial [18], antifungal [19], antiviral [20], antiparasitic [21], antithyroid [22], antimuscarinic [23], antidiabetic [24] and hypolipidemic [25] activities. DHPMs play an antagonistic/inhibitory role against acetylcholinesterase [26], urease [27], calcium channel modulation [28,29] and GABA agonism [30]. The general structure of these compounds is depicted in Figure 1 [31]. However, despite many literature reports, the pharmacological and biological properties of DHPMs are still being discovered in practical clinical biochemistry and microbiological engineering; therefore, there is still a need for additional research on their cytotoxic effects on selected hospital bacterial strains causing diseases associated with blood infections, such as sepsis. There is still a need for further in vivo studies to better delineate the pharmacological potential of this class of substances. Here, we present an attempt to answer this question. Until now, such compounds have not been tested for biological activities against pathogenic Escherichia coli strains, so there is a need to clarify their role.
Figure 1

Pharmaceutically relevant 3,4-Dihydropyrimidin-2(1H)-ones (DHPMs) based on [1,2,3].

2. Materials and Methods

2.1. Microorganisms and Media

Bacterial strains were obtained as a donation from Prof. Jolanta Łukasiewicz (Polish Academy of Sciences, Wrocław, Poland).

2.2. Agarose-Native Gel Electrophoresis

Basic protocol for agarose-native gel electrophoresis in horizontal mode is as follows, unless otherwise indicated. Agarose was dissolved at 1% in hot 0.1 M His/0.1 M MES buffer at pH 6.1 and cast onto a flat bed with a comb in the center position. After loading the sample, electrophoresis was run at room temperature for 30 min or an indicated period under a constant voltage of 100 V. Electrophoresis was run on an ATTO-AE6500 apparatus by ATTO (Tokyo, Japan).

2.3. Statistical Analysis

All experimental data were presented as the means ± standard error of the mean (SEM) of a minimum of three independent experiments for BeWo cells (n = 3). In the case of villous explants, each experiment was performed on five independent cultures of human placenta explants (n = 5). Normality was checked by the Shapiro–Wilk test. One-way ANOVA was used to determine differences among more than two treatment groups, and the Tukey test was used post hoc Prism 8 Software by GraphPad (La Jolla, CA, USA). Statistical significance is indicated by different letters (p < 0.05): the same letters indicate no significant difference, with a < b < c < d < e < f or * p < 0.05, ** p < 0.1 and *** p < 0.01.

2.4. Experimental Chemistry

All reagents used in this work were purchased from Sigma-Aldrich (Sant Louis, MO, USA). Melting points were measured on an Electrothermal 9200 apparatus (Cole-Parmer, Staffordshire, UK) and are uncorrected. 1H NMR, 13C NMR and 19F NMR spectra were recorded in solutions (DMSO-d6) on a Varian 400 spectrometer (Agilent, Santa Clara, CA, USA). Elemental analysis was carried out on a vario MICRO cube elemental Analyzer Elementar, (Langenselbold, Germany). FTIR spectra were recorded with a Nicolet 380 FT-IR spectrophotometer (Thermo Fisher Scientific, Waltham, MA, USA) in the region of 4000–400 cm−1 using the KBr discs method. HR-ESI-MS spectra were recorded on a BrukermicrOTOF-Q II (Bruker, Billerica, MA, USA) with electrospray ionization (ESI). Analytical thin-layer chromatography (TLC) was carried out on silica gel 60 F254 (Merck, Darmstadt, Germany), and various developing systems were applied. Compounds were detected with 254 nm UV light (Lamp UV Consort 2 × 15 W, 254 NM, VL215-C). Column chromatography was performed on silica gel (Kiselgel 60, 230–400 mesh Merck, Darmstadt, Germany) with acetone/n-hexane 1:2 (v/v).

3. Microorganisms and Media

Similar research is presented in [32,33,34,35,36,37,38,39,40]. The newly synthesized compounds presented in our earlier manuscripts were described as new and innovative broad-spectrum antimicrobial drugs more potent than the antibiotics commonly used in nosocomial infections. All analyzed compounds belong to the compounds referred to as peptidomimetics, with a structure and function similar to that of peptides. Therefore, the analysis of new compounds from this group is extremely important in hospital or clinical infections [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34]. On the basis of the obtained results, including MIC and MBC tests, it was found that the analyzed compounds significantly affect the defragmentation of the membrane and the structure of the cell wall of bacteria containing LPSs of various lengths [32,33,34,35,36,37,38,39,40]. Additionally, studies were carried out related to the effects of the oxidative stress generated in the cell under the influence (modification) of the analyzed compounds on the damage and modification of bacterial DNA after digestion with the Fpg enzyme (Labjot, New England Biolabs, UK). The obtained values of oxidative damage after digestion with Fpg protein were compared with the modifications to bacterial DNA after treatment with antibiotics, such as ciprofloxacin, bleomycin and cloxacillin [32,33,34,35,36,37,38,39,40]. The presented research shows that 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) could be used in the future as potential “candidates” for new drugs in relation to the analyzed antibiotics [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45].

4. Experimental Section

4.1. General Procedure for the Synthesis of P-fluorophenyl-substituted 3,4-dihydropyrimidine-2 (1H)-one Derivatives –

A mixture of 3.7 mmol of 4-fluorobenzaldehyde or benzaldehyde, 5.6 mmol of urea or thiourea, 3.7 mmol acetoacetate and 1.5 mmol NH4Cl was heated at 100 °C and stirred for 3 h. After the completion of the reaction, as indicated by TLC (EtOAc/n-hexane, 1:2, v/v), 10 mL of diethyl ether was added to the reaction mixture. The precipitate was filtered and dried in vacuo. The crude product was purified by crystallization from ethanol. The crude products, 4d and 4e, were purified by column chromatography on silica gel using acetone/n-hexane 1:2 (v/v) as an eluent.

4.2. Product : Ethyl 4-(4-fluorophenyl)-6-methyl-1,2,3,4-tetrahydro-2-oxopyrimidine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of colorless crystals; mp. 179–180 °C [Lit mp. 181–183 °C] [46]; 1H NMR (400 MHz, DMSO-d6) δ 9.17 (s, 1H), 7.70 (d, J = 2.9 Hz, 1H), 7.24 (dd, J = 8.5, 5.5 Hz, 2H), 7.12 (t, J = 8.7 Hz, 2H), 5.13 (d, J = 3.3 Hz, 1H), 4.07–e3.87 (m, 2H), 2.23 (s, 3H), 1.07 (t, J = 7.1 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 165.7, 152.4, 148.9, 141.6, 128.7, 128.6, 115.6, 115.4, 99.6, 59.6, 53.8, 18.2, 14.5; 19F NMR (376 MHz, DMSO-d6) δ −115.47. 1H- and 13CNMR data were in accordance with those reported in the literature [47]; IR (cm−1): 3236, 2977, 1704, 1651, 1461, 1219, 1083, 816, 794, 605; ESI-TOF HR: m/z calculated for C14H15FN2O3: 557.2212 [2M+H]+, found 557.2233; elemental analysis calculated for C14H15FN2O3: C, 60.43%; H, 5.43%; N, 10.07%, found C, 59.72%; H, 5.44%; N, 10,06.

4.3. Product : Methyl 4-(4-fluorophenyl)-6-methyl-1,2,3,4-tetrahydro-2-oxopyrimidine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of colorless crystals; mp. 195–196 °C [Lit mp.191–192 °C] [48]; 1H NMR (400 MHz, DMSO-d6) δ 9.28–9.06 (m, 1H), 7.72 (d, J = 3.5 Hz, 1H), 7.31–7.21 (m, 2H), 7.12 (t, J = 8.9 Hz, 2H), 5.13 (d, J = 3.4 Hz, 1H), 3.51 (s, 3H), 2.24 (s, 3H); 13C NMR (100 MHz, DMSO-d6) δ 166.2, 152.4, 149.2, 141.4, 128.6, 128.5, 115.7, 115.5, 99.4, 53.6, 51.2, 18.2; 19F NMR (376 MHz, DMSO-d6) δ -115.4. 1H- and 13CNMR data were in accordance with those reported in the literature [49]; IR (cm−1): 3327, 2952, 1697, 1667, 1414, 1324, 1240, 1094, 825, 780, 646; ESI-TOF HR: m/z calculated for C13H13FN2O3: 551.1718 [2M+Na]+, found 551.1691; elemental analysis calculated for C13H13FN2O3: C, 59.09%; H, 4.96%; N, 10.60%, found C 59.12%; H, 4.59%; N, 10.63%.

4.4. Product : iso-Butyl 4-(4-fluorophenyl)-6-methyl-1,2,3,4-tetrahydro-2-oxopyrimidine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of white crystals; mp. 164–165 °C, 1H NMR (400 MHz, DMSO-d6) δ 9.22 (s, 1H), 7.71 (s, 1H), 7.24 (dd, J = 8.5, 5.7 Hz, 2H), 7.13 (dd, J = 9.9, 7.7 Hz, 2H), 5.14 (d, J = 3.4 Hz, 1H), 3.82–3.61 (m, 2H), 2.26 (s, 3H), 1.73 (dt, J = 13.2, 6.6 Hz, 1H), 0.72 (dd, J = 6.8, 3.6 Hz, 6H); 13C NMR (100 MHz, DMSO-d6) δ 165.7, 152.3, 149.4, 128.7, 128.6, 115.7, 115.4, 99.2, 69.7, 31.1, 27.6, 19.3, 19.2, 18.2; 19F NMR (376 MHz, DMSO-d6) δ-115.43; IR (cm−1): 3315, 2962, 1704, 1682, 1643, 1507, 1467, 1379, 1223, 1092, 841, 796, 662; ESI-TOF HR: m/z calculated for C16H19FN2O3: 635.2657 [2M+Na]+, found 635.2644; elemental analysis calculated for C16H19FN2O3: C, 62.73%; H, 6.25%; N, 9.14%, found C, 62.23%; H, 6.26%; N, 9.17%.

4.5. Product : Ethyl 4-(4-fluorophenyl)-6-propyl-1,2,3,4-tetrahydro-2-oxopyrimidine-5-carboxylate

The crude product was purified by column chromatography with silica gel (n-hexane/acetone; 2:1; v/v) to afford the corresponding product as colorless crystals; mp. 152–153 °C, 1H NMR (400 MHz, DMSO-d6) δ 9.23–9.06 (m, 1H), 7.72–7.64 (m, 1H), 7.24 (dd, J = 8.6, 5.6 Hz, 2H), 7.12 (t, J = 8.9 Hz, 2H), 5.13 (d, J = 3.4 Hz, 1H), 3.97 (qd, J = 7.1, 1.6 Hz, 2H), 2.61 (td, J = 7.4, 4.3 Hz, 2H), 1.54 (q, J = 7.5 Hz, 2H), 1.07 (t, J = 7.1 Hz, 3H), 0.89 (t, J = 7.3 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 165.6, 152.6, 152.4, 128.7, 128.9, 115.7, 115.6, 99.3, 59.0, 53.9, 31.1, 22.8, 14.5, 14.0; 19F NMR (376 MHz, DMSO-d6) δ −115.2; IR (cm−1): 3441, 2966, 1698, 1644, 1508, 1456, 1232, 1095, 836, 773; ESI-TOF HR: m/z calculated for C16H19FN2O3: 305.1301 [M+H]+, found 305.1301; elemental analysis calculated for C16H19FN2O3: C, 62.73%; H, 6.25%; N, 9.14%, found 62.74%; H, 6.22%; N, 9,17%.

4.6. Product : Ethyl 4-(4-fluorophenyl)-6-phenyl-1,2,3,4-tetrahydro-2-oxopyrimidine-5-carboxylate

The crude product was purified by column chromatography with silica gel (n-hexane/acetone; 2:1; v/v) to afford the corresponding product as colorless crystals; mp. 168–169 °C [Lit mp. 168–170 °C] [50]; 1H NMR (400 MHz, DMSO-d6) δ 9.28 (d, J = 2.0 Hz, 1H), 7.82 (dd, J = 3.7, 1.9 Hz, 1H), 7.47–7.33 (m, 5H), 7.33–7.25 (m, 2H), 7.19 (t, J = 8.8 Hz, 2H), 5.23 (d, J = 3.4 Hz, 1H), 3.69 (q, J = 7.1 Hz, 2H), 0.70 (t, J = 7.1 Hz, 3H); 13C NMR (101 MHz, DMSO-d6) δ 165.5, 152.4, 149.5, 141.1, 135.4, 129.3, 128.8, 128.8, 128.7, 128.1, 115.8, 115.6, 100.7, 59.5, 53.9, 13.8; 19F NMR (376 MHz, DMSO-d6) δ -115.2. 1H- and 13CNMR data were in accordance with those reported in the literature [50]; IR (cm−1): 3350, 2987, 1698, 1659, 1506, 1450, 1370, 1299, 1084, 836, 762, 693; ESI-TOF HR: m/z calculated for C19H17FN2O3: 363.1772 [M+Na]+, found 363.1775; elemental analysis calculated for C19H17FN2O3: C, 67.05%; H, 5.03%; N, 8.23%, found C 67.03%; H, 5.06%; N, 8.26%.

4.7. Product : 4-(4-fluorophenyl)-1,2,3,4-tetrahydro-6-methyl-2-oxo-N-phenylpyrimi-dinecarboxamide

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of white crystals; mp. 218–219 °C; 1H NMR (400 MHz, DMSO-d6) δ 9.51 (s, 1H), 8.71 (d, J = 2.0 Hz, 1H), 7.58–7.49 (m, 3H), 7.32–7.26 (m, 2H), 7.22 (dd, J = 8.5, 7.3 Hz, 2H), 7.17–7.10 (m, 2H), 7.01–6.95 (m, 1H), 5.38 (d, J = 2.9 Hz, 1H), 2.03 (s, 3H); 13C NMR (100 MHz, DMSO-d6) δ 165.7, 152.9, 140.9, 139.6, 139.02 128.9, 128.8, 128.7, 123.5, 120.1, 115.7, 115.5, 105.7, 54.9, 31.1, 17.5; 19F NMR (376 MHz, DMSO-d6) δ −115.4. 1H- and 13CNMR data were in accordance with those reported in the literature [51]; IR (cm−1): 3277, 2986, 1702, 1675, 1629, 1509, 1439, 1321, 1244, 1096, 841, 755, 692; ESI-TOF HR: m/z calculated for C18H16FN3O2: 326.0787 [M+H]+, found 326.0791; elemental analysis calculated for C18H16FN3O2: C, 66.45%; H, 4.96%; N, 12.92%, found C, 66.28%; H, 4.52%; N, 13.01%.

4.8. Product : 4-(4-fluorophenyl)-1,2,3,4-tetrahydro-6-methyl-2-oxopyrimidine-5-carbo-xamide

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of white crystals; mp. 197–198 °C; 1H NMR (400 MHz, DMSO-d6) δ 8.58 (d, J = 2.0 Hz, 1H), 7.49 (d, J = 2.4 Hz, 1H), 7.27 (dd, J = 8.6, 5.6 Hz, 2H), 7.12 (t, J = 8.9 Hz, 2H), 6.88 (s, 2H), 5.22 (d, J = 3.0 Hz, 1H), 2.05 (s, 3H); 13C NMR (100 MHz, DMSO-d6) δ 168.5, 153.0, 141.0, 141.0, 139.4, 128.9, 128.8, 115.5, 115.3, 104.7, 54.5, 17.5; 19F NMR (376 MHz, DMSO-d6) δ −115.6; IR (cm−1): 3243, 2936, 1700, 1682, 1636, 1507, 1457, 1214, 1094, 836, 798, 647; elemental analysis calculated for C12H12FN3O2: C, 58.06%; H, 4.67%; N, 16.93%, found C, 58.03%; H, 4.65%; N, 16.95%.

4.9. Product : Ethyl 4-(4-fluorophenyl)-6-methyl-1,2,3,4-tetrahydro-2-thioxopyrimi-dine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 191–192 °C [Lit mp. 190–192 °C] [52]; 1H NMR (400 MHz, DMSO-d6) δ 10.31 (s, 1H), 9.61 (s, 1H), 7.39–7.09 (m, 4H), 5.16 (d, J = 3.7 Hz, 1H), 3.99 (dd, J = 7.1, 2.4 Hz, 2H), 2.28 (s, 3H), 1.08 (t, J = 7.1 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 174.3, 165.7, 152.4, 148.9, 141.6, 128.7, 128.6, 115.6, 115.4, 99.6, 59.6, 53.8, 18.2, 14.5; 19F NMR (376 MHz, DMSO-d6) δ −114.7. 1H- and 13CNMR data were in accordance with those reported in the literature [53]; IR (cm−1): 3326, 2985, 1682, 1603, 1574, 1467, 1334, 1283, 1176, 1118, 1029, 854, 759, 649; ESI-TOF HR: m/z calculated for C14H15FN2O2S: 295.0916 [M+H]+, found 295.0947; elemental analysis calculated for C14H15FN2O2S: C, 57.13%; H, 5.14%; N, 9.52%; S, 10.89%, found C, 57.17%; H, 5.13%; N, 9.58%; S, 10.79%.

4.10. Product : Methyl 4-(4-fluorophenyl)-6-methyl-1,2,3,4-tetrahydro-2-thioxopyrimi-dine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 189–190 °C [Lit mp. 191–193 °C] [54], 1H NMR (400 MHz, DMSO-d6) δ 10.34 (s, 1H), 9.63 (dd, J = 3.8, 1.9 Hz, 1H), 7.35–7.09 (m, 4H), 5.16 (d, J = 3.8 Hz, 1H), 3.54 (s, 3H), 2.28 (s, 3H); 13C NMR (100 MHz, DMSO-d6) δ 174.7, 166.0, 163.2, 160.8, 145.9, 140.0, 140.01, 128.8, 128.7, 115.9, 115.7, 100.8, 53.7, 51.5, 17.6; 19F NMR (376 MHz, DMSO-d6) δ −114.6. 1H- and 13CNMR data were in accordance with those reported in the literature. [55]; IR (cm−1): 3309, 2998, 1669, 1574, 1470, 1385, 1200, 1117, 1094, 838, 767, 651; ESI-TOF HR: m/z calculated for C13H13FN2O2S: 303.0579 [M+Na]+, found 303.0572; elemental analysis calculated for C13H13FN2O2S: C, 55.70%; H, 4.67%; N, 9.99%; S, 11.44%, found C, 55.74%; H, 4.65%; N, 10.09%; S, 11.41%.

4.11. Product : Ethyl 4-(4-fluorophenyl)-6-phenyl-1,2,3,4-tetrahydro-2-thioxopyrimi-dine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 204–205 °C; 1H NMR (400 MHz, DMSO-d6) δ 9.73 (s, 1H), 7.43–7.17 (m, 9H), 5.26 (s, 1H), 3.73 (q, J = 7.1 Hz, 2H), 0.71 (t, J = 7.1 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 174.9, 165.3, 146.3, 139.7, 134.3, 129.6, 129.1, 128.9, 128.8, 128.16, 116.0, 115.8, 102.2, 59., 53.9, 13.7; 19F NMR (376 MHz, DMSO-d6) δ −114.5. 1H- and 13CNMR data were in accordance with those reported in the literature [56]; IR (cm−1): 3297, 2983, 1672, 1570, 1464, 1333, 1201, 1135, 1118, 1029, 835, 769, 693; ESI-TOF HR: m/z calculated for C19H17FN2O2S: 713.2068 [2M+H]+, found 713.2074; elemental analysis calculated for C19H17FN2O2S: C, 64.03%; H, 4.81%; N, 7.86%; S, 9.00%, found C, 64.05%; H, 4.84%; N, 7.91%; S, 9.06%.

4.12. Product : Ethyl 4-(4-fluorophenyl)-6-(3-methylphenyl)-1,2,3,4-tetrahydro-2-thi-oxopyrimi-dine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 196–197 °C; 1H NMR (400 MHz, DMSO-d6) δ 9.71 (s, 1H), 7.46–7.33 (m, 2H), 7.33–7.19 (m, 4H), 7.19–6.89 (m, 3H), 5.24 (s, 1H), 3.74 (qd, J = 7.0, 2.6 Hz, 2H), 2.31 (s, 3H), 0.73 (t, J = 7.1 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 175.0, 165.3, 146.4, 137.2, 134.2, 130.2, 129.5, 128.9, 128.8, 128.0, 126.3, 116.0, 115.8, 102.0, 59.9, 53.9, 21.2, 13.7; 19F NMR (376 MHz, DMSO-d6) δ −114.5; IR (cm−1): 3304, 2979, 1674, 1567, 1462, 1332, 1181, 1132, 1095, 856, 768, 698; ESI-TOF HR: m/z calculated for C20H19FN2O2: 741.2381 [2M+H]+, found 741.2386; elemental analysis calculated for C20H19FN2O2: C, 64.85%; H, 5.17%; N, 7.56%; S, 8.66%, found C, 64.83%; H, 5.11%; N, 7.51%; S, 8.68%.

4.13. Product : Ethyl 4-(4-fluorophenyl)-6-(4-methylphenyl)-1,2,3,4-tetrahydro-2-thioxo-pyrimidine-5-carboxylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 198–199 °C; 1H NMR (400 MHz, DMSO-d6) δ 9.72 (s, 1H), 7.38 (dd, J = 8.6, 5.6 Hz, 2H), 7.28–7.14 (m, 6H), 5.24 (s, 1H), 3.75 (q, J = 7.1 Hz, 2H), 2.33 (s, 3H), 0.75 (t, J = 7.1 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 175.0, 165.3, 146.4, 139.2, 131.3, 129.1, 128.9, 128.8, 128.6, 116.0, 115.8, 101.9, 59.9, 53.8, 21.4, 13.8; 19F NMR (376 MHz, DMSO-d6) δ −114.6; IR (cm−1): 3292, 2993, 1668, 1570, 1455, 1334, 1201, 1135, 1051, 821, 754, 641; ESI-TOF HR: m/z calculated for C20H19FN2O2S: 741.2381 [2M+H]+, found 741.2418; elemental analysis calculated for C20H19FN2O2S: C, 64.85%; H, 5.17%; N, 7.56%; S, 8.66%, found C, 64.83%; H, 5.18%; N, 7.55%; S, 8.68%.

4.14. Product : 4-(4-fluorophenyl)-1,2,3,4-tetrahydro-6-methyl-N-phenyl-2-thioxo-pyrimidine-5-carboxamide

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 182–183 °C; 1H NMR (400 MHz, DMSO-d6) δ 9.98 (s, 1H), 9.69 (s, 1H), 9.40 (d, J = 2.8 Hz, 1H), 7.59–7.45 (m, 2H), 7.33–7.11 (m, 6H), 7.04–6.94 (m, 1H), 5.46–5.28 (m, 1H), 2.05 (s, 3H); 13C NMR (101 MHz, DMSO-d6) δ 174.5, 165.3, 139.3, 136.1, 129.0, 128.9, 128.9, 123.8, 120.1, 115.9, 115.7, 107.5, 54.9, 16.9; 19F NMR (376 MHz, DMSO-d6) δ −114.7. 1H- and 13CNMR data were in accordance with those reported in the literature. [57] IR (cm−1): 3262, 2951, 1682, 1631, 1585, 1484, 1338, 1208, 1162, 842, 750, 689; ESI-TOF HR: m/z calculated for C18H16FN3OS: 364.2380 [M+Na]+, found 364.2382; elemental analysis calculated for C18H16FN3OS: C, 63.32%; H, 4.72%; N, 12.31%; S, 9.39%, found C, 63.29%; H, 4.75%; N, 12.30%; S, 9.41%.

4.15. Product : 4-(4-fluorophenyl)-1,2,3,4-tetrahydro-6-methyl-2-thioxopyrimidine-5-carboxamide

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 138–139 °C; 1H NMR (400 MHz, DMSO-d6) δ 9.83 (d, J = 1.9 Hz, 1H), 9.33 (d, J = 1.5 Hz, 1H), 7.25 (dd, J = 8.6, 5.7 Hz, 2H), 7.15 (t, J = 8.9 Hz, 2H), 5.25 (d, J = 3.4 Hz, 1H), 2.06 (s, 3H); 13C NMR (100 MHz, DMSO-d6) δ 174.3, 168.2, 139.7, 136.4, 129.0, 129.0, 115.7, 115.5, 106.6, 54.5, 31.1, 16.9; 19F NMR (376 MHz, DMSO-d6) δ −114.9; IR (cm−1): 3370, 2983, 1681, 1609, 1506, 1479, 1210, 1186, 1097, 841, 687, 597; ESI-TOF HR: m/z calculated for C12H12FN3OS: 288.1402 [M+Na]+, found 288.1402; elemental analysis calculated for C12H12FN3OS: C, 54.32%; H, 4.56%; N, 15.84%; S, 12.09%, found C, 54.33%; H, 4.58%; N, 15.82%; S, 12.11%.

4.16. Product : Ethyl 1,2,3,4-tetrahydro-6-methyl-2-oxo-4-phenylpyrimidine-5-carboxy-late

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 209–210 °C [Lit mp. 211–213 °C] [58]; 1H NMR (400 MHz, DMSO-d6) δ 9.18–9.06 (m, 1H), 7.68 (d, J = 2.8 Hz, 1H), 7.34–7.13 (m, 5H), 5.13 (d, J = 3.4 Hz, 1H), 3.96 (dd, J = 7.0, 1.1 Hz, 2H), 2.23 (s, 3H), 1.07 (t, J = 7.1 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 165.8, 148.7, 145.3, 128.8, 127.7, 126.6, 99.7, 59.6, 54.4, 18.2, 14.5. 1H- and 13CNMR data were in accordance with those reported in the literature [59]. IR (cm−1): 3245, 2978, 1700, 1647, 1465, 1313, 1220, 1090, 817, 782, 698; ESI-TOF HR: m/z calculated for C14H16N2O3: 261.0302 [M+H]+, found 261.0303; elemental analysis calculated for C14H16N2O3: C, 64.60%; H, 6.20%; N, 10.76%, found C, 64.65%; H, 6.17%; N, 10.79%.

4.17. Product : Ethyl 1,2,3,4-tetrahydro-6-methyl-2-thioxo-4-phenylpyrimidine-5-carbo-xylate

The crude product was purified by crystallization from ethanol to obtain a suitable product in the form of yellow crystals; mp. 214–215 °C [Lit mp. 211–212 °C] [60], 1H NMR (400 MHz, DMSO-d6) δ 10.28 (s, 1H), 9.60 (s, 1H), 7.42–7.16 (m, 5H), 5.16 (d, J = 3.8 Hz, 1H), 3.99 (q, J = 7.0 Hz, 2H), 2.27 (s, 3H), 1.08 (t, J = 7.1 Hz, 3H); 13C NMR (100 MHz, DMSO-d6) δ 174.7, 165.5, 145.4, 143.9, 129.0, 128.1, 126.8, 101.2, 60.0, 54.5, 17.6, 14.4. 1H- and 13CNMR data were in accordance with those reported in the literature [61], IR (cm−1): 3328, 2978, 1670, 1574, 1465, 1370; 1283, 1176, 1118, 1027, 833, 760, 692; ESI-TOF HR: m/z calculated for C14H16N2O2S: 277.0417 [M+H]+, found 277.0419; elemental analysis calculated C14H16N2O2S: C, 60.86%; H, 5.84%; N, 10.14%; S, 11.61%, found C, 60.81%; H, 5.85%; N, 10.15%; S, 11.63%.

5. Results and Discussion

5.1. Chemistry

Recently, we showed that δ-lactones show high biological activity in terms of action on bacterial lipopolysaccharide (LPS) in model strains of Escherichia coli K12 (without LPS in its structure) and R2–R4 (LPSs of different lengths in its structure) [41]. Therefore, we were interested in whether the same effect of fluorine presented in the structure of the investigated DHPMs would modulate their antimicrobial activity, as was observed for δ-lactones. For this purpose, it was necessary to develop a method to provides DHPMs containing fluorine in their structure. A series of target DHPM 4s were prepared via Biginelli reaction and catalyzed by ammonium chloride under solvent-free conditions (Figure 2). The desired DHPMs were obtained with the yields ranging from 56% to 82% (Table 1). The developed method turned out to also be effective for the synthesis of thioxopyrimidine derivative 5j, which was provided with up to 76% of isolated yield. In order to verify the impact of the fluorine atom on biological activity, DHPMs without fluorine substituents (6a and 6b) were obtained (Table 1).
Figure 2

Synthesis of the studied DHPMs.

Table 1

Yield of DHPMs 4, 5 and 6.

EntryCompoundXR1R2R3Yield
1 4a OMeOEtF67%
2 4b OMeOMeF56%
3 4c OMeOi-BuF63%
4 4d OPrOEtF69%
5 4e OPhOEtF82%
6 4h OMeNHPhF67%
7 4i OMeNH2F57%
8 5a SMeOEtF54%
9 5b SMeOMeF55%
10 5e SPhOEtF54%
11 5g SPh(3-Me)OEtF58%
12 5h SPh(4-Me) OEtF63%
13 5j SMeNHPhF76%
14 5k SMeNH2F61%
15 6a OMeOEtH70%
16 6b SMeOEtH59%
The structures of all obtained compounds were confirmed using NMR and mass spectroscopy. The analytical data of all synthesized DHPMs are presented in the Experimental Section.

5.2. Cytotoxic Studies of the Library of Peptidomimetics

Analyzed DHPMs had an inhibitory effect on each studied bacterial model. Varied inhibitory activities were noted, depending on the nature of the substituent R1 in the pyrimidine ring of tested compounds 4 and 5. Interestingly, DHPM derivatives 4b, 4c, 4h, 4i, 5b, 5g, 5h, 5j and 5k exhibited selectivity towards the K12 and R2 strains. The presence of more lipophilic groups at the R1 position of tested compounds 4d and 4e resulted in increased inhibitory activity against the R3 strain. It is clearly visible that the structure of the tested compounds is closely related to their inhibitory activity. The R3 and R4 strains turned out to be less sensitive to tested compounds. The 4-fluorine group introduced into the aromatic ring did not have such a pronounced effect on the increase in activity of the tested compounds, as was the case of the δ-lactones tested previously [41]. MIC values for each model E. coli R2–R4 and K12 strains were visible on all analyzed microplates after the addition of the microbial growth index (resazurin)(Table 2).
Table 2

Statistical analysis of analyzed compounds by MIC, MBC and MBC/MIC; * p < 0.05, ** p < 0.01 and *** p < 0.001.

No. of Samples4b4c4h4i5b,5g5h5j,5kType of Test
K12***********MIC
R2***********MIC
R3***********MIC
R4***********MIC
K12***********MBC
R2************MBC
R3************MBC
R4************MBC
K12***********MBC/MIC
R2***********MBC/MIC
R3***********MBC/MIC
R4***********MBC/MIC
In all analyzed plates where model strains K12 and R2–R4 of E. coli bacteria were treated with the analyzed compounds, MIC and MBC test values were observed for all 16 compounds but at different levels. Bacterial strains R3 and R4 were more susceptible to modification with these compounds (visible dilutions of 10–2, corresponding to concentrations of 0.0025 µM) than strains K12 and R2 (visible dilutions of 10–6, corresponding to concentrations of 0.2 µM). Strain R4 was the most sensitive of all strains, possibly due to having the longest lipopolysaccharide chain length. Based on the values in both types of tests and after the color-change analysis, the compounds 4b, 4c, 4h, 4i, 5b, 5g, 5h, 5j and 5k were used for further analyses. In all analyzed cases, MBC values were approximately 40 times higher than MIC values (Figure 3). Modification of functional groups in the tested compounds significantly changed the MBC/MIC ratios, (Figure 3, Figure 4 and Figure 5 and Table 1).
Figure 3

Minimum inhibitory concentration (MIC) of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) in model bacterial strains. The x-axis features 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) used sequentially. The y-axis shows the MIC value in µg/mL−1. Investigated strains of E. coli: K12 as control (blue), R2 strain (orange), R3 strain (gray) and R4 strain (yellow). The y-axis shows the MBC value in µg/mL−1. The order in which the compounds were applied to the plate is shown in Supplementary Materials Figure S1.

Figure 4

Minimum bactericidal concentration (MBC) of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) in model bacterial strains. The x-axis features 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) used sequentially. The y-axis shows the MIC value in µg/mL−1. Investigated strains of E. coli: K12 as control (blue), R2 strain (orange), R3 strain (gray) and R4 strain (yellow). The y-axis shows the MBC value in µg/mL−1. The order in which the compounds were applied to the plate is shown in Supplementary Materials Figure S1.

Figure 5

The ratio of MBC/MIC of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) in model bacterial strains. The x-axis features 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) used sequentially. The y-axis shows the MIC value in µg/mL−1. Investigated strains of E. coli: K12 as control (blue), R2 strain (orange), R3 strain (gray) and R4 strain (yellow). The y-axis shows the MBC value in µg/mL−1. The order in which the compounds were applied to the plate is shown in Supplementary Materials Figure S1.

5.3. Analysis of Bacterial DNA Isolated from E. coli R2–R4 Strains Modified with 3,4-dihydropyrimidin-2(1H)-ones (DHPMs)

The obtained MIC values, as well as those obtained in our previous studies with the various types of analyzed compounds [37,38,39,40,41,42], indicate that 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) also have a toxic effect on the analyzed model bacterial strains K12 and R2–R4 due to the type of substituent in the aromatic rings and the appropriate length of the alkyl chain with the specified type of substituent. Selected compounds 4b, 4c, 4h, 4i, 5b, 5g, 5h, 5j and 5k were used to modify model E. coli strains and digest them with Fpg protein from the group of repair glycosylases, which is a marker of oxidative stress [37,38,39,40,41,42]. We wanted to observe the effect of modification on the size and location of the oxidative damage (base type) in the DNA chain, which is a substantial reduction in the three forms of bacterial DNA: ccc, oc and linear form, as observed in previous studies [37,38,39,40,41,42]. The results of bacterial DNA modified with 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) (Figure 6; with the action of Fpg) showed that all analyzed compounds with different alkyl chain lengths and substituents containing a hydroxyl group or an amino group together with substituents containing bromine and chlorine can strongly change the topology of the plasmid form, even after digestion with Fpg protein (Supplemental Materials S1 and S2) and are highly toxic to it, similar to the observations of previous studies [37,38,39,40,41,42]. The obtained results were also statistically significant at the level of p < 0.05. (Figure 6).
Figure 6

Percentage of plasmid DNA recognized by Fpg enzyme (y-axis) with model bacterial strains K12 and R2–R4 (x-axis). Compounds 4b, 4c, 4h, 4i, 5b, 5g, 5h, 5j and 5k were statistically significant at * p < 0.05 (see Table 1).

The obtained results indicate that these compounds can also potentially be used as “substitutes for” commonly used antibiotics (Figure 7 and Figure 8, Supplementary Materials Figure S3).
Figure 7

Examples of MIC with model bacterial strains K12, R2, R3 and R4 for study of the mechanisms of antibiotics ciprofloxacin and bleomycin. The x-axis features antibiotics used sequentially. The y-axis features the MIC value in µg/mL−1.

Figure 8

Percentage of bacterial DNA recognized by Fpg enzyme in model bacterial strains after ciprofloxacin, bleomycin and cloxacillin treatment. The compounds were statistically significant at p < 0.05.

Large modifications of plasmid DNA were observed for compounds 4b, 4c, 4h, 4i, 5b, 5g, 5h, 5j and 5k among all analyzed compounds. Modifications with antibiotics were smaller and not as clear as in the case of the analyzed DHPMs. The sensitivity of E. coli strains to the cytotoxic effect of the compounds used and after Fpg protein digestion was as follows: R4 > R2 > R3 > K12; this effect was very similar to that observed in our previous studies [37,38,39,40,41,42]. This indicates a very high cytotoxicity of the analyzed DHPMs towards bacterial DNA, probably resulting from the modification of the components of the bacterial membrane and the LPS contained in it, which may induce specific enzymes from the group of topoisomerases and helicases, destabilizing the structure of the exposed DNA bases. The stabilization of the complex that regulates these enzymes is perhaps necessary for cell survival. Blocking these enzymes inhibits DNA replication and rewriting, which can affect its total amount.

6. Conclusions

The analysis of the presented compounds through a complex cycle of their synthesis reactions may constitute a potential source of innovative, cheap substitutes for antibiotics against various types of bacterial microorganisms (LPS). We focused on the structure–activity relationship of compounds with the 3,4-dihydropyrimidin-2(1H)-one scaffold. The obtained results show a strong influence of the activity of all 16 analyzed compounds on the values of MIC and MBC, as well as MBC/MIC for various strains of E. coli: R2–R4 and K12. Based on the analysis of the above studies, nine compounds (4b, 4c, 4h, 4i, 5b, 5g, 5h, 5j and 5k) were selected for further research. The repair activity using the Fpg-glycosylase protein of the BER pathway (base excision repair) was then compared, which is in accordance with our research hypothesis. The above results are very important for research on the mechanism of cytotoxic action of new compounds as innovative and safe drugs based on 3,4-dihydropyrimidin-2(1H)-one (DHPM) derivatives, which may lead to the destruction of the bacterial cell membrane by changing its surface charge and may play an important role in changing its electrokinetic potential, expressing the reversal of burdens. A particular effect was observed for the mentioned nine select compounds, which showed certain MIC values and MBC/MIC ratios. Compounds 5b, 5j and 5k showed superselectivity in all analyzed bacterial strains, even differentiating cytotoxicity in the K12 strain. The described compounds can be highly specific for pathogenic E. coli strains on the basis of the model strains used. In the future, cytotoxicity studies should also be carried out using various cell lines and cultures to assess the biocompatibility of the tested compounds with active peptidomimetics.
  41 in total

1.  Dihydropyrimidinone positive modulation of delta-subunit-containing gamma-aminobutyric acid type A receptors, including an epilepsy-linked mutant variant.

Authors:  Ryan W Lewis; John Mabry; Jason G Polisar; Kyle P Eagen; Bruce Ganem; George P Hess
Journal:  Biochemistry       Date:  2010-06-15       Impact factor: 3.162

2.  One pot synthesis of thiazolodihydropyrimidinones and evaluation of their anticancer activity.

Authors:  B Shivarama Holla; B Sooryanarayana Rao; B K Sarojini; P M Akberali
Journal:  Eur J Med Chem       Date:  2004-09       Impact factor: 6.514

3.  Synthesis and biological evaluation of novel homocamptothecins conjugating with dihydropyrimidine derivatives as potent topoisomerase I inhibitors.

Authors:  Lingjian Zhu; Pengfei Cheng; Ning Lei; Jianzhong Yao; Chunquan Sheng; Chunlin Zhuang; Wei Guo; Wenfeng Liu; Yongqiang Zhang; Guoqiang Dong; Shengzhang Wang; Zhenyuan Miao; Wannian Zhang
Journal:  Arch Pharm (Weinheim)       Date:  2011-09-29       Impact factor: 3.751

4.  A Reexamination of the Mechanism of the Biginelli Dihydropyrimidine Synthesis. Support for an N-Acyliminium Ion Intermediate(1).

Authors:  C. Oliver Kappe
Journal:  J Org Chem       Date:  1997-10-17       Impact factor: 4.354

5.  Synthesis, evaluation and absolute configuration assignment of novel dihydropyrimidin-2-ones as picomolar sodium iodide symporter inhibitors.

Authors:  Pierre Lacotte; David-Alexandre Buisson; Yves Ambroise
Journal:  Eur J Med Chem       Date:  2013-02-09       Impact factor: 6.514

6.  Dihydropyrimidine based hydrazine dihydrochloride derivatives as potent urease inhibitors.

Authors:  Ajmal Khan; Jamshed Hashim; Nuzhat Arshad; Ijaz Khan; Naureen Siddiqui; Abdul Wadood; Muzaffar Ali; Fiza Arshad; Khalid Mohammed Khan; M Iqbal Choudhary
Journal:  Bioorg Chem       Date:  2015-12-31       Impact factor: 5.275

7.  The Biginelli reaction with an imidazolium-tagged recyclable iron catalyst: kinetics, mechanism, and antitumoral activity.

Authors:  Luciana M Ramos; Bruna C Guido; Catharine C Nobrega; José R Corrêa; Rafael G Silva; Heibbe C B de Oliveira; Alexandre F Gomes; Fábio C Gozzo; Brenno A D Neto
Journal:  Chemistry       Date:  2013-03-04       Impact factor: 5.236

8.  1,2-Diarylethanols-A New Class of Compounds That Are Toxic to E. coli K12, R2-R4 Strains.

Authors:  Paweł Kowalczyk; Damian Trzepizur; Mateusz Szymczak; Grzegorz Skiba; Karol Kramkowski; Ryszard Ostaszewski
Journal:  Materials (Basel)       Date:  2021-02-22       Impact factor: 3.623

9.  One Pot Synthesis of Micromolar BACE-1 Inhibitors Based on the Dihydropyrimidinone Scaffold and Their Thia and Imino Analogues.

Authors:  Jessica Bais; Fabio Benedetti; Federico Berti; Iole Cerminara; Sara Drioli; Maria Funicello; Giorgia Regini; Mattia Vidali; Fulvia Felluga
Journal:  Molecules       Date:  2020-09-10       Impact factor: 4.411

View more
  2 in total

1.  Promiscuous Lipase-Catalyzed Knoevenagel-Phospha-Michael Reaction for the Synthesis of Antimicrobial β-Phosphono Malonates.

Authors:  Jan Samsonowicz-Górski; Dominik Koszelewski; Paweł Kowalczyk; Paweł Śmigielski; Anastasiia Hrunyk; Karol Kramkowski; Aleksandra Wypych; Mateusz Szymczak; Rafał Lizut; Ryszard Ostaszewski
Journal:  Int J Mol Sci       Date:  2022-08-08       Impact factor: 6.208

2.  Functionalised Anodised Aluminium Oxide as a Biocidal Agent.

Authors:  Mateusz Schabikowski; Magdalena Laskowska; Paweł Kowalczyk; Andrii Fedorchuk; Emma Szőri-Dorogházi; Zoltán Németh; Dominika Kuźma; Barbara Gawdzik; Aleksandra Wypych; Karol Kramkowski; Łukasz Laskowski
Journal:  Int J Mol Sci       Date:  2022-07-28       Impact factor: 6.208

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.