Literature DB >> 35205601

Correction: Szymanski et al. Recent Advances in Loop Heat Pipes with Flat Evaporator. Entropy 2021, 23, 1374.

Pawel Szymanski1, Richard Law2, Ryan J MᶜGlen3, David A Reay2.   

Abstract

The author of the original publication [...].

Entities:  

Year:  2022        PMID: 35205601      PMCID: PMC8871354          DOI: 10.3390/e24020162

Source DB:  PubMed          Journal:  Entropy (Basel)        ISSN: 1099-4300            Impact factor:   2.524


The author of the original publication [1] wishes to make the following corrections to the Authorship, Author Contributions, and Funding Information: Richard Law, Ryan J. MᶜGlen, and David A. Reay have been added to the list of contributing authors. The updated Author Contributions statement is provided below: Author Contributions: P.S.: conceptualization, formal analysis, investigation, methodology, writing—original draft, writing—review and editing; R.L.: conceptualization, formal analysis, project administration, resources, investigation, methodology, supervision, writing—review and editing, funding acquisition; R.J.M.: conceptualization, formal analysis, resources, investigation, methodology, supervision, writing—review and editing, funding acquisition; D.A.R.: conceptualization, formal analysis, resources, investigation, methodology, supervision, writing—review and editing. All authors have read and agreed to the published version of the manuscript. The authors wish to update the missing Funding statement as follows: Funding: This work was funded by the UK EPSRC, Newcastle University, the Aavid Thermal Division of Boyd Corp under a CASE PhD studentship, and the Dean of the Faculty of Mechanical Engineering and Shipbuilding, Gdansk University of Technology, Poland. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original publication has been updated.
  1 in total

1.  Correction: Szymanski et al. Recent Advances in Loop Heat Pipes with Flat Evaporator. Entropy 2021, 23, 1374.

Authors:  Pawel Szymanski; Richard Law; Ryan J MᶜGlen; David A Reay
Journal:  Entropy (Basel)       Date:  2022-01-21       Impact factor: 2.524

  1 in total
  2 in total

Review 1.  Additive Manufacturing as a Solution to Challenges Associated with Heat Pipe Production.

Authors:  Pawel Szymanski; Dariusz Mikielewicz
Journal:  Materials (Basel)       Date:  2022-02-21       Impact factor: 3.623

2.  Correction: Szymanski et al. Recent Advances in Loop Heat Pipes with Flat Evaporator. Entropy 2021, 23, 1374.

Authors:  Pawel Szymanski; Richard Law; Ryan J MᶜGlen; David A Reay
Journal:  Entropy (Basel)       Date:  2022-01-21       Impact factor: 2.524

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.