Literature DB >> 34978538

In Revision THA, Is the Re-revision Risk for Dislocation and Aseptic Causes Greater in Dual-mobility Constructs or Large Femoral Head Bearings? A Study from the Australian Orthopaedic Association National Joint Replacement Registry.

Wayne Hoskins1,2, Sophia Rainbird3, Chelsea Dyer4, Stephen E Graves3,5, Roger Bingham2.   

Abstract

BACKGROUND: Dislocation is one of the most common causes of a re-revision after a revision THA. Dual-mobility constructs and large femoral head bearings (≥ 36 mm) are known options for mitigating this risk. However, it is unknown which of these choices is better for reducing the risk of dislocation and all-cause re-revision surgery. It is also unknown whether there is a difference between dual-mobility constructs and large femoral head bearings according to the size of the acetabular component. QUESTIONS/PURPOSES: We used data from a large national registry to ask: In patients undergoing revision THA for aseptic causes after a primary THA performed for osteoarthritis, (1) Does the proportion of re-revision surgery for prosthesis dislocation differ between revision THAs performed with dual-mobility constructs and those performed with large femoral head bearings? (2) Does the proportion of re-revision surgery for all aseptic causes differ between revision THAs performed with dual-mobility constructs and those performed with large femoral head bearings? (3) Is there a difference when the results are stratified by acetabular component size?
METHODS: Data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) were analyzed for 1295 first-revision THAs for aseptic causes after a primary THA performed for osteoarthritis. The study period was from January 2008-when the first dual-mobility prosthesis was recorded-to December 2019. There were 502 dual-mobility constructs and 793 large femoral head bearings. There was a larger percentage of women in the dual-mobility construct group (67% [334 of 502]) compared with the large femoral head bearing group (51% [402 of 793]), but this was adjusted for in the statistical analysis. Patient ages were similar for the dual-mobility construct group (67 ± 11 years) and the large femoral head group (65 ± 12 years). American Society of Anesthesiologists (ASA) class and BMI distributions were similar. The mean follow-up was shorter for dual-mobility constructs at 2 ± 1.8 years compared with 4 ± 2.9 years for large femoral head bearings. The cumulative percent revision (CPR) was determined for a diagnosis of prosthesis dislocation as well as for all aseptic causes (excluding infection). Procedures using metal-on-metal bearings were excluded. The time to the re-revision was described using Kaplan-Meier estimates of survivorship, with right censoring for death or database closure at the time of analysis. The unadjusted CPR was estimated each year of the first 5 years for dual-mobility constructs and for each of the first 9 years for large femoral head bearings, with 95% confidence intervals using unadjusted pointwise Greenwood estimates. The apparent shorter follow-up of the dual-mobility construct group relates to the more recent increase in dual-mobility numbers recorded in the registry. The results were adjusted for age, gender, and femoral fixation. Results were subanalyzed for acetabular component sizes < 58 mm and ≥ 58 mm, set a priori on the basis of biomechanical and other registry data.
RESULTS: There was no difference in the proportion of re-revision for prosthesis dislocation between dual-mobility constructs and large femoral head bearings (hazard ratio 1.22 [95% CI 0.70 to 2.12]; p = 0.49). At 5 years, the CPR of the re-revision for prosthesis dislocation was 4.0% for dual mobility constructs (95% CI 2.3% to 6.8%) and 4.1% for large femoral head bearings (95% CI 2.7% to 6.1%). There was no difference in the proportion of all aseptic-cause second revisions between dual-mobility constructs and large femoral head bearings (HR 1.02 [95% CI 0.76 to 1.37]; p = 0.89). At 5 years, the CPR of dual-mobility constructs was 17.6% for all aseptic-cause second revision (95% CI 12.6% to 24.3%) and 17.8% for large femoral head bearings (95% CI 14.9% to 21.2%). When stratified by acetabular component sizes less than 58 mm and at least 58 mm, there was no difference in the re-revision CPR for dislocation or for all aseptic causes between dual-mobility constructs and large femoral head bearings.
CONCLUSION: Either dual-mobility constructs or large femoral head bearings can be used in revision THA, regardless of acetabular component size, as they did not differ in terms of re-revision rates for dislocation and all aseptic causes in this registry study. Longer term follow-up is required to assess whether complications develop with either implant or whether a difference in revision rates becomes apparent. Ongoing follow-up and comparison in a registry format would seem the best way to compare long-term complications and revision rates. Future studies should also compare surgeon factors and whether they influence decision-making between prosthesis options and second revision rates. Nested randomized controlled trials in national registries would seem a viable option for future research. LEVEL OF EVIDENCE: Level III, therapeutic study.
Copyright © 2022 by the Association of Bone and Joint Surgeons.

Entities:  

Mesh:

Year:  2022        PMID: 34978538      PMCID: PMC9263451          DOI: 10.1097/CORR.0000000000002085

Source DB:  PubMed          Journal:  Clin Orthop Relat Res        ISSN: 0009-921X            Impact factor:   4.755


  51 in total

1.  2020 Otto Aufranc Award: Malseating of modular dual mobility liners.

Authors:  Joey Romero; Amanda Wach; Scott Silberberg; Yu-Fen Chiu; Geoffrey Westrich; Timothy M Wright; Douglas E Padgett
Journal:  Bone Joint J       Date:  2020-07       Impact factor: 5.082

2.  Computerized range of motion analysis following dual mobility total hip arthroplasty, traditional total hip arthroplasty, and hip resurfacing.

Authors:  Gregory G Klingenstein; Alyssa M Yeager; Joseph D Lipman; Geoffrey H Westrich
Journal:  J Arthroplasty       Date:  2013-03-09       Impact factor: 4.757

Review 3.  Factors That Affect Outcome Following Total Joint Arthroplasty: a Review of the Recent Literature.

Authors:  Forrest H Schwartz; Jeffrey Lange
Journal:  Curr Rev Musculoskelet Med       Date:  2017-09

4.  Use of dual-mobility cup in revision hip arthroplasty reduces the risk for further dislocation: analysis of seven hundred and ninety one first-time revisions performed due to dislocation, reported to the Swedish Hip Arthroplasty Register.

Authors:  Maziar Mohaddes; Peter Cnudde; Ola Rolfson; Alexander Wall; Johan Kärrholm
Journal:  Int Orthop       Date:  2017-01-11       Impact factor: 3.075

5.  Early Results From the American Joint Replacement Registry: A Comparison With Other National Registries.

Authors:  Nathanael Heckmann; Hansel Ihn; Michael Stefl; Caryn D Etkin; Bryan D Springer; Daniel J Berry; Jay R Lieberman
Journal:  J Arthroplasty       Date:  2019-01-05       Impact factor: 4.757

6.  Does the Dual-Mobility Hip Prosthesis Produce Better Joint Kinematics During Extreme Hip Flexion Task?

Authors:  Danilo S Catelli; Erik Kowalski; Paul E Beaulé; Mario Lamontagne
Journal:  J Arthroplasty       Date:  2017-05-05       Impact factor: 4.757

7.  Dual Mobility Cups: Effect on Risk of Revision of Primary Total Hip Arthroplasty Due to Osteoarthritis: A Matched Population-Based Study Using the Nordic Arthroplasty Register Association Database.

Authors:  Rasmus Kreipke; Cecilia Rogmark; Alma B Pedersen; Johan Kärrholm; Geir Hallan; Leif Ivar Havelin; Keijo Mäkelä; Søren Overgaard
Journal:  J Bone Joint Surg Am       Date:  2019-01-16       Impact factor: 5.284

8.  The efficacy of dual-mobility cup in preventing dislocation after total hip arthroplasty: a systematic review and meta-analysis of comparative studies.

Authors:  Matteo Romagnoli; Alberto Grassi; Giuseppe Gianluca Costa; Lionel E Lazaro; Mirco Lo Presti; Stefano Zaffagnini
Journal:  Int Orthop       Date:  2018-07-21       Impact factor: 3.075

9.  Large Metal Heads and Highly Cross-Linked Polyethylene Provide Low Wear and Complications at 5-13 Years.

Authors:  Paul F Lachiewicz; Jane A O'Dell; John M Martell
Journal:  J Arthroplasty       Date:  2018-02-23       Impact factor: 4.757

10.  Adverse Local Tissue Reaction due to Acetabular Corrosion in Modular Dual-Mobility Constructs.

Authors:  Kevin A Sonn; R Michael Meneghini
Journal:  Arthroplast Today       Date:  2020-12-04
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.