Literature DB >> 34857491

Development and evaluation of ligament phantoms targeted for shear wave tensiometry.

Lesley R Arant1, Joshua D Roth2.   

Abstract

Developing a shear wave tensiometer capable of non-invasively measuring ligament tension holds promise for enhancing research and clinical assessments of ligament function. Such development would benefit from tunable test specimens fabricated from well-characterized and consistent materials. Although previous work found that yarn can replicate the mechanical behavior of collateral ligaments, it is not obvious whether yarn-based phantoms would be suitable for development of a shear wave tensiometer for measuring ligament tension. Accordingly, the primary objective of this study was to characterize the mechanical properties and shear wave speed - stress relationships of ligament phantoms fabricated from yarn and silicone, and compare these results to published data from biological ligaments. We measured the mechanical properties and shear wave speeds during axial loading in nine phantoms with systematically varied material properties. We performed a simple linear regression between shear wave speed squared and axial stress to determine the shear wave speed - stress relationship for each phantom. We found comparable elastic moduli, hysteresis, and shear wave speed squared - stress regression parameters between the phantoms and collateral ligaments. For example, the ranges of the coefficients of determination (R2) and slopes across the nine phantoms were 0.84-0.95, and 0.78-1.27 kPa/m2/s2, respectively, which overlapped with the ranges found in a prior study in porcine collateral ligaments (0.84-0.996 and 0.34-1.18 kPa/m2/s2, respectively). Additionally, the shear wave speed squared - stress regression parameters varied predictably with the density of the phantom and the shear modulus of the silicone. In summary, we found that yarn-based phantoms serve as mechanical analogs for ligaments (i.e., are ligament mimicking), and thus, should prove beneficial for investigations into ligament structure-function relationships and in the development of a shear wave tensiometer for measuring ligament tension.
Copyright © 2021 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Ligament tension; Mechanical properties; Orthopedic biomechanics; Sensor development; Soft tissue balancing; Synthetic materials

Mesh:

Year:  2021        PMID: 34857491      PMCID: PMC8792233          DOI: 10.1016/j.jmbbm.2021.104984

Source DB:  PubMed          Journal:  J Mech Behav Biomed Mater        ISSN: 1878-0180


  39 in total

1.  Ligament material behavior is nonlinear, viscoelastic and rate-independent under shear loading.

Authors:  Jeffrey A Weiss; John C Gardiner; Carlos Bonifasi-Lista
Journal:  J Biomech       Date:  2002-07       Impact factor: 2.712

2.  Mechanical properties of the posterolateral structures of the knee.

Authors:  Robert F LaPrade; Timothy S Bollom; Fred A Wentorf; Nicholas J Wills; Keith Meister
Journal:  Am J Sports Med       Date:  2005-07-07       Impact factor: 6.202

3.  Healing ligaments have decreased cyclic modulus compared to normal ligaments and immobilization further compromises healing ligament response to cyclic loading.

Authors:  G M Thornton; N G Shrive; C B Frank
Journal:  J Orthop Res       Date:  2003-07       Impact factor: 3.494

4.  A continuous method to compute model parameters for soft biological materials.

Authors:  Martin L Tanaka; Charles A Weisenbach; Mark Carl Miller; Laurel Kuxhaus
Journal:  J Biomech Eng       Date:  2011-07       Impact factor: 2.097

5.  Replication of the tensile behavior of knee ligaments using architected acrylic yarn.

Authors:  Roberto A Pineda Guzman; Mariana E Kersh
Journal:  J Mech Behav Biomed Mater       Date:  2021-03-12

6.  Mechanical Analysis of Extra-Articular Knee Ligaments. Part One: Native knee ligaments.

Authors:  Kristof Smeets; Joshua Slane; Lennart Scheys; Steven Claes; Johan Bellemans
Journal:  Knee       Date:  2017-08-05       Impact factor: 2.199

7.  Modeling the effect of collagen fibril alignment on ligament mechanical behavior.

Authors:  Christina J Stender; Evan Rust; Peter T Martin; Erica E Neumann; Raquel J Brown; Trevor J Lujan
Journal:  Biomech Model Mechanobiol       Date:  2017-11-24

8.  Effect of dermatan sulfate glycosaminoglycans on the quasi-static material properties of the human medial collateral ligament.

Authors:  Trevor J Lujan; Clayton J Underwood; Heath B Henninger; Brent M Thompson; Jeffrey A Weiss
Journal:  J Orthop Res       Date:  2007-07       Impact factor: 3.494

9.  Gauging force by tapping tendons.

Authors:  Jack A Martin; Scott C E Brandon; Emily M Keuler; James R Hermus; Alexander C Ehlers; Daniel J Segalman; Matthew S Allen; Darryl G Thelen
Journal:  Nat Commun       Date:  2018-04-23       Impact factor: 14.919

10.  Multi-color and Multi-Material 3D Printing of Knee Joint models.

Authors:  Oliver Grimaldo Ruiz; Yasin Dhaher
Journal:  3D Print Med       Date:  2021-04-29
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.