| Literature DB >> 34819404 |
Katsuhiro Asamatsu1, Kai Yoshitake1, Makoto Saito1, Wipoo Prasitwuttisak1, Jun-Ichiro Ishibashi2, Akihi Tsutsumi2, Nurul Asyifah Mustapha3, Toshinari Maeda3, Katsunori Yanagawa1.
Abstract
A novel deep-branching archaeal lineage was discovered at high-temperature hot springs around Oyasukyo Gorge in Akita Prefecture, Japan. Actively boiling hot spring water contained >1×104 microbes mL-1. The microbial community composition assessed by analyzing 16S rRNA gene amplicons revealed that the dominant bacterial phyla were Proteobacteria and Aquificae (>50% of the microbial composition) in samples collected in 2016 and 2019, respectively. Approximately 10% of the reads obtained in both years were not assigned to any taxonomy. The more detailed phylogenetic positions of the unassigned sequences identified using a clone library and phylogenetic tree showed that they formed a clade that was independent, distantly related to known phyla, and had low similarity (<82%) to all other sequences in available databases. The present results suggest that this novel archaeal phylum-level lineage thrives in boiling hot springs in Japan.Entities:
Keywords: boiling hot spring; hyperthermophile; novel archaeal lineage; thermophile
Mesh:
Substances:
Year: 2021 PMID: 34819404 PMCID: PMC8674440 DOI: 10.1264/jsme2.ME21048
Source DB: PubMed Journal: Microbes Environ ISSN: 1342-6311 Impact factor: 2.912
Fig. 1.Location and images of sampling sites. (A) Red dot: study sites around Oyasukyo Gorge in northeastern Japan. (B), (C), and (D) Oyasukyo Daifunto. (E) and (F) Oku-Oyasukyo Ooyu hot spring. (G) Storage tank located about midway between Oyasukyo Daifunto and Oku-Oyasukyo Ooyu hot springs.
Geochemical characteristics of hot water samples.
| Sample | Site | Sampling | Temp. | pH | EC | ORP | SiO2
| NH3
| H2S | Alkalinity | Na | Mg | K | Ca | Fe | Al | Cl | SO4
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OYS18 | Oyasukyo Daifunto | 2016/09/27 | 95.3 | 7.6 | 121 | –267 | 2.78 | 606 | 19 | 1.00 | 7.04 | <2 | 473 | 596 | <0.90 | <1.9 | 4.19 | 1.28 |
| OYS19 | Oyasukyo Daifunto | 2016/09/27 | 93.2 | 8.2 | 143 | –273 | 3.23 | 606 | 23 | 1.11 | 8.44 | <2 | 553 | 589 | <0.90 | <1.9 | 4.70 | 1.39 |
| OYS20 | Oku-Oyasukyo Ooyu | 2016/09/27 | 93.1 | 8.7 | 134 | –371 | 3.75 | 652 | 51 | 1.55 | 9.35 | <2 | 490 | 189 | <0.90 | <1.9 | 4.25 | 1.18 |
| OYS22 | Storage tank | 2016/09/27 | 78.6 | 9.2 | 100 | 106 | 2.29 | 560 | 0.5 | 0.67 | 6.38 | <2 | 423 | 408 | <0.90 | <1.9 | 4.01 | 1.11 |
| OYS41 | Oku-Oyasukyo Ooyu | 2019/11/15 | 90.4 | 9.2 | — | — | — | — | — | — | — | — | — | — | — | — | — | — |
| OYS43 | Oyasukyo Daifunto | 2019/11/16 | 90.4 | 8.4 | — | — | — | — | — | — | — | — | — | — | — | — | — | — |
Microbial cell counts and qPCR findings of 16S rRNA gene abundance.
| Sample | Total counts | Prokaryotic 16S rRNA | Archaeal 16S rRNA |
|---|---|---|---|
| OYS18 | 3.1±0.33×104 | 5.5±0.66×104 | <1.0×103 |
| OYS19 | 2.3±0.28×104 | 4.3±0.92×104 | <1.0×103 |
| OYS20 | 2.6±0.90×104 | 3.6±0.22×104 | <1.0×103 |
| OYS22 | 5.9±0.98×105 | 4.0±2.00×105 | 2.4±1.0×103 |
| OYS41 | 1.0±0.69×104 | 3.5±0.33×104 | <1.0×103 |
| OYS43 | 1.9±0.14×104 | 5.4±0.57×104 | <1.0×103 |
Data are shown as means±standard deviations.
Fig. 2.Taxonomic composition of 16S rRNA gene sequences from hot spring water samples around Oyasukyo Gorge. 16S rRNA gene fragments were obtained by HTS.
BLAST search result of OYS 16S rRNA sequence obtained from the OYS43 cloning library.
| OTU | Length | Top hit | Taxonomic affiliation* | Identity | Query | E | Reference |
|---|---|---|---|---|---|---|---|
| OYS43c13 | 688 | pCIRA-S | Archaea; | 81.61% | 96% | 6E-149 |
|
* Elucidated using RDP Hierarchy Browser.
Fig. 3.Phylogenetic tree of archaeal 16S rRNA gene sequences based on neighbor-joining (A) and maximum-likelihood (B) methods. Sequences obtained by a clone library analysis are indicated in bold. The sequence length and number of OTUs are shown in parentheses. Values at nodes represent bootstrap scores >50%. Bootstrap values are expressed as ratios (%) of 1,000 replicates. Scale bar, 10% estimated sequence divergence.